CAUTION:
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions in the
literature accompanying this product.
DIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with
liquids, such as vases, shall be placed on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
Class II equipment symbol.
This symbol indicates that the unit
has a double insulation system.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is
made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However,
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA NOTICE:
This device complies
two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
there is no guarantee that interference will not occur in a particular installation. If
with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
45
Warnings
SMC HOME equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SMC HOME equipment should be installed and operated with minimum distance 20cm between the radiator and
your body. SMC HOME transmitter must not be colocated or operating in conjunction with any other antenna or
transmitter.
The rating information is located at the bottom of the unit.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the Manufactu
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufa
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do
not place objects filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and
operable during intended use. In order to completely disconnect the apparatus from power, the mains plug
should be completely removed from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine,
fire or other heat sources.
cturer.
rer’s instructions.
67
In the Box
SINGING MACHINE HOME UNIT
HOME ADAPTERHOME ADAPTER CABLE
HOME MIC-REMOTE
CONNECTION
Turn unit over to connect AC Adapter
and HDMI cable to connect to
television (sold separately)
Bluetooth® Speaker Operation
Plug in AC Power Adapter
compatible with
Singing Machine Home automatically turns on with sound when powered
(there is no power button). Wirelessly connect any Bluetooth® device to
Singing Machine Home to stream audio through the 2.1 channel speakers.
89
Bluetooth® Speaker Operation
Activate Pairing
Preparing Bluetooth® device
Turn on Bluetooth® and enable your device to be discoverable. Please refer to
the device’s user guide for specific instructions.
Select “SMC_Home” from the list of Bluetooth® compatible devices to pair.
The Bluetooth® speaker is now ready to stream your music.
Mic-Remote Operation
Install Batteries
Open the Mic-Remote by gently pulling the top of the battery cover with a
fingernail or small tool. Insert batteries (4 x AA not included) as shown in the
illustration below and replace the battery cover.
Singing Machine Home automatically detects the Mic-Remote. Press down on
the optical trackpad to pair. The LED will first turn red and then steady green
to indicate successful pairing. An unpaired
green light.
Mic-Remote will display a flashing
1011
Mic-Remote Operation
Mic-Remote
The Mic-Remote is used to navigate Singing Machine Play and to control
volume. Turn off by pressing and holding down the optical trackpad for 4
seconds. The LED will turn steady red and will then go dark when the
Mic-Remote is off.
Volume Up
Trackpad
Volume Down
LED
Two Mic-Remotes can be connected simultaneously.
Visit us at home.singingmachine.com.
Mic-Remote Operation
Connecting To Television
Singing Machine Home is an elegantly crafted wireless speaker that delivers
soulful, room-filling sound. When the mood is right, Home turns into an
on-demand, WiFi-enabled karaoke machine.
Connected via HDMI, Home provides instant access to Singing Machine Play, a
platform that streams more than 8,000 HD karaoke music videos.
Make sure the TV is turned off before connecting the HDMI cable (not
included) and the AC adapter
(included) as illustrated before.
1213
Using Singing Machine Play
Singing Machine Home defaults to Bluetooth® speaker mode; a message on
your television screen will prompt you to switch over to Singing Machine Play
mode, providing you with instant access to thousands of karaoke tunes.
Light will be green
to show active
subscription
1. Click the optical trackpad to exit Bluetooth Speaker and switch to Singing Machine Play.
2. A list of available wireless networks will be displayed, select from list or enter manually.
3. A Login/Create Account screen will appear. Follow the instructions to get started.
Setting Up Your Account
To get started, set up your account either in Singing Machine Play or on the
Singing Machine website (home.singingmachine.com).
CREATE NEW ACCOUNT
Login Information
Username
JohnDoe12
JohnDoe_12@gmail.com
Email
•••••••
Password
Note:
1. A valid credit card is required to register an account.
2. An active internet connection through a WiFi network is required to use
Singing Machine Play.
3. Choose from several subscription options.
Profile InformationAddress Information
First Name
Last Name
Gender
Date of Birth
Phone Number
John
Doe
Male
01
•••••••
Next Step
1981January
Country
State / Province
City
Address
Zip Code
United States
Florida
Miami Beach
1111 Lincoln Rd.
33139
1415
Using Singing Machine Play
Navigating The User Interface
Use the Mic-Remote to scroll through Singing Machine Play by flicking your
thumb over the optical trackpad in the direction you want to move.
FEATURED
BROWSE BY
SEARCH
MACHINES
SETTINGS
Press down once on the optical trackpad to make a selection. Press and hold
down the optical trackpad for 2 seconds to bring up the Quick Menu at any
time, which can be customized in the Settings. Holding down the trackpad for
4 seconds will turn off the Mic.-Remote.
switch back to Bluetooth® Speaker, you can either scroll to your username
To
at the top of the menu and select Bluetooth® speaker, or bring up the Quick
Menu and select the option. After 10 minutes of inactivity, Singing Machine
Home will automatically switch to the Bluetooth® Speaker mode.
For more information on using Singing Machine Play or other features, please
visit us at home.singingmachine.com.
Specifications
Audio
Outpower: 10W
Impedance: 4Ω ± 15%
Frequency response: 150Hz -20Khz
4.5” Woofer x 1
Output Power: 20W
Impedance: 4Ω ± 15%
Frequency response : 50Hz ~2KHz