The Singing Machine ISM1060BT User Manual
iSM1060BT
INSTRUCTION MANUAL
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
Included
Please make sure the following items are included.
iSM1060BT Base
Wired Microphone x 2
Pedestal
Manual
Tower
Stand
Speaker Stand x 2
Speaker x 2
Detachable Mic
Holder x 2
Singing Machine Flash Drive
Speaker Stand
Screw x 4
Power Cord Clamp
Screw x 2
AC Adaptor
Pedestal Screw x 2
Power Cord Clamp x 2
— 2 —
Installation
u
v
Insert the pedestal into the stand u
and then gently rotate clockwise v
1
until tight, making sure the screw hole
in the Pedestal aligns with the screw
hole on the stand.
Insert and tighten one of the silver
pedestal screws to secure the Pedestal
2
to the stand (as shown).
u
v
3
— 3 —
Install the power cord clips into areas
u and v and secure them using the
two black clamp screws. Then align the
power cord securely under the clamps.
Installation
u
v
u
v
u
Insert the base into the pedestal u
and then gently rotate clockwise v
4
until the screw hole on the base aligns
with the screw hole on the pedestal.
Insert and tighten the remaining silver
pedestal screw to secure the base to
5
the pedestal.
6
— 4 —
Insert the detachable mic holders u
into the mic holder slots as illustrated.
Installation
Place the tower speaker on to the
speaker stand aligning the screw holes
7
on both the speaker and stand, then
insert and tighten the black screws
through the bottom of the base.
— 5 —
Location of Controls (Top/Front)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
1. TFT LCD Color Screen
2. FUNCTION Button
3. BLUETOOTH Pairing Button
4. ON/OFF Button
5. VOCAL Button
6. MENU Button
7. Navigation UP 5 Button
8. ECHO + Button
9. Navigation LEFT Button
10. ENTER/ Button
11. Navigation DOWN Button
12. ECHO - Button
13. Navigation RIGHT Button
n
14. RECORD
Button
15. MIC 1 Holder
17. MIC 1 Jack
18. Headphone Jack
19. SMC USB Slot
20. ON/OFF Indicator
21. MIC 1 VOLUME Control
22. MASTER VOLUME Control
23. MIC 2 VOLUME Control
24. MIC 2 Holder
25. Cradle
26. MIC 2 Jack
19
20
21
22
23
24
25
26
— 6 —
Location of Controls (Rear)
1
3
4
52
1. DC Jack 4. HDMI Jack
5. LINE IN Jack2. Right Tower Speaker Jack
3. Left Tower Speaker Jack
Location of Controls (Playback Display)
Song
Total Time
Current
Playlist
Lead Vocal Status
Record
Status
Playback Status
Song Title
Song
Elapsed Time
— 7 —
Master Volume: 0-20
Echo Control: 0-8
Connection
Connecting the Microphones and Headphones
Microphones:
Connect a microphone into Mic jack 1 u
as well as Mic jack 2 v (when desired).
Note: Do not drop or tap the Mic as
damage to the Mic or speakers may occur.
Do not twirl the microphone by cord as it
will cause damage to the encased wiring.
Headphones:
For private listening, use headphones
(not included). Install headphones into
the headphone jack w.
Note: The headphones must be
disconnected for the speakers to
produce sound.
Connecting the Tower Speakers
To protect the speakers, make sure the iSM1060BT is off and the MASTER VOLUME
and the MIC 1 and 2 VOLUME controls are set to minimum.
1
Connect the Right and Left Tower Speakers to the jacks on back of the unit as
2
illustrated.
Turn the power on and slowly raise the MASTER VOLUME and the MIC 1 and 2
VOLUME controls to a comfortable level.
3
— 8 —
Right Tower
Speaker Jack
Left Tower
Speaker Jack
Loading...