The Shrunks Indoor Tuckaire Kids Travel Bed User Manual [en, de, es, fr]

PULL

VALVE #2

VALVE #1

RUBBER FLAP

VALVE #1

EN

PUMPS

Tuckaire™ Inflatable Travel Bed

Instructions & Warnings

WARNING

Read these materials prior to assembling and using your Inflatable Bed, failure to
follow these instructions could result in serious injury or death.

- Set up and supervision must be done by a competent adult!

- The Inflatable Bed is not a life saving device!

- Ensure proper set up prior to use!

- Instruct children on proper use of this product!

- Over inflation is the major cause of leaks.

- Do not inflate with an air compressor or other high pressure pump.
This item is designed to be inflated with a high volume of air but at a low pressure.

- Read the instructions and warnings printed in this manual for proper inflation and safe use.

- Keep away from fire and other heat sources. Keep out of direct sunlight when
not in use.

- This unit is intended for domestic family use only and not for use in public areas or
as a rental.

- The Inflatable Bed should be inflated using any of the recommended pumps as indicated
on the following page.

SPECIFICATIONS

Set up and supervision must be done by a competent adult. Depending on the model, your
inflatable travel bed may come with one of the following pumps.

We recommend using either of the following
rapid foot pumps for proper inflation:

The Shrunks’ Jetaire™ Electric Pump is also
recommended for achieving maximum
performance of the Travel Beds:
(We do not recommend inflating the Inflatable Bed by mouth)

INFLATION

More information on proper inflation is available on our website. Please view the
short how-to videos at www.theshrunks.com

Please note: Keep in mind the temperature of the air going into the product and the outside
air. If your inflator is hot and sending warm air into the product, when it cools, it will seem
like your product is losing air. This is normal. The product should be firm when completely
inflated, but allow a small depression when pushed on with your hand while in use. This is a
good evaluation of proper inflation. Proper inflation should be checked often if the product is
left inflated for consecutive days.

Inflatable Beds

Toddler Size - Manufacturer Item No. 85001
Kids Size - Manufacturer Item No. 88028

Parts included
1 - Repair Kit consisting of: 2pcs of self-adhesive repair patch
1 – Inflatable Mattress
1 – Pump
1 - Carrying Bag

Recommended Age: Toddler Bed 2+, Kids Bed 6+
Recommended Maximum Weight: 150lbs / 68 kg
Recommended maximum number of persons: 1 child per bed

Valve #1 – Inflate this valve first

Valve #2 – Inflate this valve second

VALVE #2

VALVE #1

plug. Pull black rubber flap towards you to
close the air chamber. This allows air to

OPEN

enter, but does not allow air to escape.

RUBBER FLAP

PULL

1. For both valves 1 and 2: Open valve stem

2. Inflate with recommended pump. Begin by inflating Valve #1 until inner mattress is firm.

OPEN

PULL

VALVE #2

VALVE #1

VALVE #2
Inflate this valve second

VALVE #1

Inflate this valve first

RUBBER FLAP

RUBBER FLAP

Next, inflate Valve #2 until outer mattress is firm.

3. Close valve stem plugs on both valves. This will ensure the air stays

CLOSE

in place. Use extreme care when using an electric inflator anywhere
near water.

Beware of the dangers of electrocution when using electric powered inflators. Precautions
should be observed during use and handling to prevent shock. DO NOT inflate with an air
compressor or other high pressure pump! The travel bed is designed to be inflated with a
high volume of air but at a low pressure. DO NOT allow children to play on the product until
it is fully inflated! DO NOT OVER INFLATE! Product should be firm, but allow a small depres­sion when pushed on with your hand. DO NOT drag across concrete, pavement or other
rough surfaces. Unfold inflatable flat on a clean surface free of debris and sharp objects.

Be aware of your temperatures! Weather will affect the air volume /pressure in your unit.
Variations of temperatures can make Inflatable seem to lose or gain air. This is normal.

This allows air to escape quickly. Flatten the bed by hand

RUBBER FLAP

to remove remaining air from the bed. You can also use
the recommended pump’s deflation function to speed up
the process.

3. Roll or fold the bed to desired size, and place into carrying bag (included). Store until next use.

PUSH

2. Push black rubber flap inwards to open the air chamber.

MAINTENANCE

Maintenance is essential to increase the life of your product. Please follow all maintenance
and repairs according to this manual. If you are unsure please contact the shrunks directly.

- Inspect product regularly for potentially unsafe conditions, particularly after storms, and
suspected misuse of product.

- Do not use product if repair is needed.

- Clean product regularly per the Cleaning section of manual.

- Check storage area. Make sure it is rodent free and dry.

- When disposing of product do so in such a manner that no hazardous conditions exist at
the time the product is discarded.

Hot weather causes air to expand and the PVC might feel soft to the touch. If air is expand­ing and it feels like the unit is hard and does not allow a small depression when pushed on
with your hand, you will need to release some air to avoid over-inflation. If the air is warm
and PVC feels soft to the touch, do not add air. This will stretch the material and cause
seam problems and over-inflation.

Cold weather causes air to compress. When the sun is shining and the temperature rises,
the air will again expand in the unit. If you are experiencing a cool span you may want to
add additional air. Be careful when the temperature rises that the unit does not become
over-inflated. Damage due to over-inflation voids the warranty. All inflatables are sensitive to
cold, therefore never unfold or inflate in temperatures below 50 degrees.

DEFLATION

Prior to deflation, remove all children from the bed!

1. Open the valve stem plugs on both Valve #1 and Valve #2.

OPEN

CLEANING

If your inflatable bed is used intensively, then it should be cleaned on a weekly basis. It is
also important to clean and dry the product before it is packed away.

- When cleaning your product never use strong detergents or silicone-based products.

- Also never use high pressure cleaning equipment such as a “pressure washer”.
This will result in damage to your product.

- Clean the outside surface only

- Clean your Inflatable Bed with soap and fresh water and check that the valves are clean
and not damaged.

STORAGE

When storing your Inflatable Bed, keep it in a clean and dry place that is not affected by
major variations in temperatures and other damaging factors. You can store your Inflatable
Bed deflated and rolled up or lightly inflated. Be careful never to stack anything on top of
Inflatable Bed.

REPAIRS

All of the inflatable products include repair kit patches. You can easily repair minor
punctures and cuts. This kit includes 2 round pieces of self-adhesive material to patch the
inflatable bed;

Conditions necessary for successful repair:
Relative humidity less than 65 % / Temperature Range between 63°-77° Fahrenheit (17°­25°) Celsius. Avoid completing repairs in direct sunlight or rain and ensure that the material
is fully deflated and lies flat.
A. First, you need to locate the hole. The easiest way is to fully inflate the product and listen
for a leak, or to spray with soapy water and look for bubbles. You then need to deflate the
product.
B. Cut out a round patch to required size depending upon hole/puncture; at least

0.75’’ larger than the hole.
C. Clean the damaged part and surrounding area of the product with soap and water and
allow to dry thoroughly. Wipe the damaged part and surrounding area with fingernail polish
remover, or rubbing alcohol, and allow to dry thoroughly.
D. Apply the patch over the hole, covering the cut. Press out the air pockets which may
have formed under the patch. You can use any round object, such as a spoon, starting in
the center and then working outwards towards the edges.
E. Place heavy object on repaired area to keep patch firmly in place for 30 minutes – the
drying period.
F. Once dry, you can inflate the unit. Do not expose the repair to sun or rain until repair has
been completed.

WARNINGS

- This is not a lifesaving or personal flotation device!

- Only use under competent adult supervision!

- Never leave children unattended.

- Only use if you are willing to accept the risks!

- Always inspect product for any unsafe conditions before use!

- Always have sufficient distance between the inflatable and other objects!

- When using, keep in mind that tipping is possible!

- Never set up or use the product in or near a swimming pool!

- Always stay in control and no wild playing while using the inflatable!

- Do not use the inflatable while under the influence of alcohol or drugs!

- Remove any sharp objects such as a watch or chain before using the inflatable!

**While every attempt is made to embody the highest degree of protection in all equipment,
we cannot guarantee freedom from injury. The user assumes all risk of injury due to use. All
merchandise is sold on this condition, which no representative of the company can waiver
or change.

THE DO AND DO NOT’S

DO instruct children on the proper use of product.
DO require children to remove shoes before use.
DO allow only 1 child at a time to use the Inflatable Bed.
DO keep pets away from the product.
DO instruct children not to attach items to the product that are not specifically designed for
use with the equipment, such as but not limited to, jump ropes, clothesline, pet leashes,
cables and chains as they may cause a strangulation hazard.
DO NOT place product near fire.
DO NOT allow children to jump onto or off of the product.
DO NOT allow other toys on top of the product.
DO NOT allow helmets, headgear, loose clothing, scarves, hoods, or clothing containing
drawstrings when using this product.

RETURNS & EXCHANGES

For warranty and replacement issues, please go to www.theshrunks.com/warranty
for more information.

Head Office
5675 Goring Street Burnaby, BC
Canada V5B 0A3
T. 604-298-0588 F. 1-866-839-1624
Toll Free 1-866-354-2237

USA Logistics
925 Boblett Street
Blaine, WA, 98230
USA
Toll Free 1.866.354.2237
Fax [phone]

European Logistics
Verbreepark 3
2731BR Benthuizen
The Netherlands
T +385.99.8468449
F 1.866.354.2237

Email: [e-mail]
Website: www.theshrunks.com

DO supervise children at all times while they are using the product.
DO retain instructions with the product.
DO inspect product before each use.

PULL

VALVE #2

VALVE #1

RUBBER FLAP

VALVE #1

ES

BOMBAS

Cama inflable de viaje Tuckaire™

Instrucciones y advertencias

PRECAUCIÓN

Lea este material antes de montar y utilizar su cama inflable; si no
sigue estas instrucciones podrían producirse lesiones graves o la muerte.

- El montaje y la supervisión deben realizarse por un adulto competente.

- La cama inflable no es un dispositivo salvavidas

- Asegúrese de haber montado correctamente el producto antes de su uso

- Instruya a los niños acerca del uso correcto de este producto

- La causa principal de fugas es un inflado excesivo

- No infle la cama con un compresor de aire u otro tipo de bomba de alta presión. Este artí­culo ha sido diseñado para inflarse con un gran volumen de aire, pero a baja presión.

- Lea las instrucciones y advertencias que aparecen en este manual para un inflado adec­uado y un uso seguro.

- Mantener alejado del fuego y otras fuentes de calor. Mantener alejado de la luz solar directa
cuando no esté en uso.

- Esta unidad está ideada únicamente para uso familiar doméstico y no para ser utilizado en
zonas públicas ni para ser alquilada.

- La cama inflable deberá inflarse utilizando cualquiera de las bombas recomendadas, según
se indica en la página siguiente.

ESPECIFICACIONES

El montaje y la supervisión deben realizarse por un adulto competente. En función de su
modelo, su cama inflable de viaje puede incluir una de las siguientes bombas.

Recomendamos utilizar una de las siguientes
bombas de pie rápidas para un inflado correcto:

La bomba eléctrica Jetaire™ de The Shrunks también se
recomienda para obtener el máximo
rendimiento de las camas de viaje:
(No recomendamos inflar la cama con la boca)

INFLADO

En nuestro sitio web encontrará más información acerca del correcto inflado.
Consulte nuestros breves vídeos con instrucciones en www.theshrunks.com

Nota: tenga en cuenta la temperatura del aire que entra en el producto y la del aire en el
exterior. Si introduce aire caliente en el producto con el inflador, al enfriarse parecerá que el
producto pierda aire. Esto es normal. Si bien la superficie del colchón debe estar firme una
vez inflado completamente, debe ceder ligeramente al presionarlo con la mano durante su
uso. De esta forma podrá valorar si se ha inflado correctamente. Es recomendable compro­bar el inflado del producto con regularidad si se va a dejar inflado durante varios días.

Camas inflables

Tamaño bebé – N.º de artículo del fabricante: 85001
Tamaño doble – N.º de artículo del fabricante: 88028

Piezas incluidas
1 – Kit de reparación que incluye: 2 piezas de parche reparador autoadhesivo
1 – Colchón inflable
1 - Bomba
1 – Bolsa de transporte

Edad recomendada: Cama para bebés 2+, cama doble 6+
Peso máximo recomendado: 150 libras / 68 kg
Número máximo recomendado de personas: 1 niño por cama

Válvula n.º 1 – Infle esta válvula en
primer lugar

Válvula n.º 2 – Infle esta válvula en
segundo lugar

VALVE #2

1. Tanto para la válvula 1 como para la
válvula 2: Abra el tapón de la válvula. Tire de
la solapa negra de goma hacia usted para
cerrar la cámara de aire. De este modo
permitirá que el aire entre, pero no que

OPEN

escape.

VALVE #1

RUBBER FLAP

PULL