The Shrunks Bones Bed Protector Toddler User Manual
The Shrunks
Nylon Bed Cover
Instructions
Inflate bed to approximately 80% capacity. This will
1
make it easier to fit the Bed Cover. You can inflate
the bed fully at the end, after the Bed Cover is
fitted properly.
Push the outer master valve in, until it sits flush with
2
the bed.
Stand the bed vertically in front of you. The underside
3
of the bed should face you.
180
degrees
Corporate
4840 Highlawn Drive
Burnaby BC V5C 3T1 Canada
T. 604-298-0588
F. 1-866-839-1624
Toll Free 1-866-354-2237
Hold the Bed Cover from two corners. Place the Bed
4
Cover over the top two corners of the bed.
Rotate the bed 180 degrees. Pull the Bed Cover over
5
the remaining two corners.
Adjust fit as needed. Pull Bed Cover down to expose
6
valve. Inflate the bed fully.
To remove, pull one corner off at a time and fold
7
for storage.
USA Logistics & Warehousing
The Shrunks' Family Toy Company Inc
925 Boblett Street
Blaine, WA, 98230 USA
theshrunks.com
Loading...