RT600B
Waterproof
Digital
Thermometer
• -58 to 572°F Range
• Dishwasher Safe to 190°F
• IP65 Water Resistant
• Max/Min Memory
• °C/°F Switchable
• Includes Pocket Clip
• On/Off Switch
Specifications
Measuring Range -58 to 572˚F (-50 to 300˚C)
Accuracy ±1.8˚F (±1˚C) between -3.8 to 247.8˚F (-19.9 to 119.9˚C)
±3.6˚F (±2˚C) between -58 to -4˚F (-50 to -20˚C) and
248 to 572˚F (120 to 300˚C)
Display Resolution 0.1°
Response Time Approximately 15 seconds from ambient to 200 or 32˚F
Display Size 0.35 H x 0.71 W inches (18 W x 9 H mm)
Water Resistance IP65
Digit Size 0.28 H x 0.14 W inches (3.5 W x 7 H mm)
Probe Size 0.28 dia. x 4.8 L inches (3.5 dia. x 122 L mm)
Minimum Immersion Approx. 0.25 inch (6.4 mm)
Battery 1.5 volt, type A76 (LR44) or equivalent x 1 piece (included);
2,000 hours continuous operation
Product Size 7.9 H x 0.9 W x 0.8 D inches
(203 H x 24 W x 20 D mm)
Operating Range 32 to 190˚F (0 to 88˚C)
Instrument Operation
Press the ON/OFF button to activate the thermometer. The unit will remain in the ON
position until switched off by the user. Insert the stainless steel probe about 1 inch
(25 mm) into the object to be measured. The measured temperature will be shown
on the LCD display.
To Select ˚F or ˚C
Press the ˚C/˚F but ton on the back of the thermometer to select the desired
temperature unit.
Using MIN-MAX
Press the MIN-MAX memory but ton to read the last highest / ma ximum temperature
measured.
Press once more to read the last lowest / minimum temperature measured.
Press once more to return to normal display.
Press and hold the button for about 3 seconds then release to reset the memory.
MIN and MAX are reset when the unit is powered off.
Battery Installation
Replace the battery if the LCD display becomes dim.
Replace with 1.5 volt, t ype A76 or equivalent.
Use a screwdriver of suitable size to open the battery cover on the back.
Install the battery observing the correct polarity.
Close the bat ter y cover.
Care and Cleaning
Clean the probe immediately after each measurement to avoid cross contamination.
If there is erratic operation, press the RESET button on the back of the thermometer.
Do not expose the entire thermometer to temperatures over 190˚F (88˚C).
Do not leave inside ovens. Not submersible.
Technical Support
For warranty, ser vice, and technical assistance, please contact ThermoWorks’
Technical Services at (801) 756-7705 or email at service@thermoworks.com.
For additional cooking tips and doneness temperatures, and to see the full line of
ThermoWorks tools, visit our website at www.thermoworks.com.
ThermoWorks, Inc.
Utah, U.S.A.
Ph: 801-756-7705
Fax: 801-756-8948
www.thermoworks.com
P-10-010-01-d
Made in China
Follow us on:
RT600B Waterproof
Digital Thermometer