thermoworks Mk4 User Manual

®

Thermapen

Waterproof to IP67

Increased water resistance.
Now waterproof.

Intelligent Backlight

Automatically activates
backlight in low light
conditions or turns on any time
with touch of sensor window.

Personalization

Inside the battery
compartment you can
lock the display position,
disable sleep mode, set °C
or °F, 1° or 1.0° resolution.

Longer Battery Life

Up to 3,000 hours. More
common AAA battery.

Mk4

Patented Auto-

Rotating Display

Auto-Rotating display

intuitively flips right side up

in either hand, any position.

Motion-Sensing Sleep

& Wake Mode

Always on during use,

sleeps when set down.

Wakes when picked up.

Still Super-Fast® and

Accurate

Same speed and performance,

and still NO buttons!

Range

Accuracy

Response Time

Resolution

Units

Probe

Battery

Sleep Mode

Water Resistance

Display

Calibration

-58.0 to 572.0°F (-49.9 to 299.9°C)
±0.7°F (±0.4°C) from -58 to 392°F (-49.9 to 199.9°C) otherwise ±1.8°F (±1.0°C)
3 seconds (reads to within 1°F of final temperature of an ice bath in 3 seconds)
Factory set to 1° (user reconfigurable to 0.1°)
°C/°F switchable (user reconfigurable)

4.3 L inches, High Performance Type K Thermocouple

1.5 volt AAA, 3,000 hours typical (without backlight)
10 to 180 seconds, user selectable (user reconfigurable to disable)
IP 66/67
1 H x 1.54 W inches (25 H x 39 W mm) LCD, rotates 360°, Intelligent Backlight
Includes NIST-Traceable calibration certificate

www.thermoworks.com