Thermor 356TX, 356RX User Manual

RS8736LSPZ Manual
. Main Functions:
1. Six function keys: TIME, UP, DOWN, ALM, CH, LIGHT/SNOOZE
2. Weather forecast for 5 states: sunny, semi-sunny, cloudy, rainy, storm
3. Eight moon phase
4. Indication of the comfort index
6. 12/24 hour selectable
7. ℃/℉ selectable
8. MD/DM selectable; Digital time display: Hour, Minute, Second
9. Year range is 2000-2099, display: Month, Date, Week
10.Indoor temperature range: 0℃--+50℃.
11.Indoor humidity range: 20%-----99%.
12.Outdoor temperature range: -20℃--+60℃.
13.Outdoor humidity range: 20%-----99%.
14.Outdoor temperature/humidity: up to 3 channels
15.Pressure Bar Indicate History Trend
16.Double Alarm/Alert
17.Indoor/Outdoor trend indication of temperature/humidity.
18.LED backlight
II. The initial display when Power-on or Reset
1, The weather forecast: according to current pressure and temperature/humidity change. 2, Setting automatically quit: 8 seconds 3, Forward/backward: 8 steps / second 4, Year: 2009-1-1 5, Time: 0:00 6, Temperature: Pressure: hPa & mb 7, Alarm & Alert: closed
III. Power-on
1, When Power-On and reset, LCD full display for 3 seconds Æ enter the normal state after “Beep” Æ check
temperature, humidity and pressure.
2, It will then enter into RF registering/receiving for 3 minutes.
IV. Instruction of operating the KEYS
Function
TIME ALARM UP DOWN SNZ/LGT CHANNEL
Operation
standard mode
Click Time/ year
switchable
Hold enter into
calendar setting Alarm
AL1 / AL2 / Time switchable
setting
ON/ OFF ALARM
Switch the unit of temperature and pressure
---- 8seconds Back light / Enter Snooze
---- Enter into SNOOZE time setting
Switchable between CH1, 2, 3 and circled display clear current registered CH
g
Settin
Click Confirm the
mode
Hold ----- ------ 8steps/second
setting and into next setting
Confirm the setting and into next setting
one step forward
forward
One step backward
8steps/second backward
Under the SNOOZE setting status, quit the setting
-----
-----
V. Operate Instruction
5.1 TIME
1. At normal status, press TIME to switch normal status and year. In year status, it will exit automatically if no key is operated for 8 seconds.
2. At normal status and year display, hold TIME to enter into calendar setting.
3. At calendar time setting status, press TIME to confirm the setting.
5.2 ALARM
1. At normal status, press ALARM to switch normal status / ALARM1 / ALARM2. At ALARM time status, it will return to normal status if no key is operated for 8 seconds.
2. At alarm status, press ALARM to confirm the setting.
5.3 UP
1. At normal status, turn on/off Alarm. Hold UP for 3 seconds to change the unit of temperature and pressure.
2. Insert the battery when holding UP, its initial display is pressure testing status and the pressure data flash. The unit of pressure is Hpa.
3. At setting status, press “Up” one time, the setting will go ahead for one step; hold the keys for 3 seconds, it will run forward by 8 steps/seconds.
5.4 DOWN
1. At setting status, press “DOWN” one time, the setting will backward for one step; hold the keys for 3 seconds, it will run
back by 8 steps/seconds.
2. At normal status, press DOWN one time, there will no any effect..
5.5 CHANNEL
At normal status, press CHANNEL to switch channels. Hold it for 3 seconds into outdoor RF re-registering.
5.6 SNOOZE/LIGHT
1. At normal status, press it to light the backlight for 8 seconds.
2. When ringing, press it to stop the alarm ringing and into SNOOZE function.
3. At normal status, hold it for 3 seconds into snooze time setting. The adjustable range is 5-30 minutes.
Notes: There is BEE sound when all the keys are operated. When ringing, press SNOOZE to into snooze status, and press other keys to stop alarm function.
VI Function
6.1 The function of time
At current normal status or year display, press TIME for 3 seconds into time setting. The setting item will flash. When setting year, it shows YR. When setting hour, it shows Hr. The sequence of setting is year – MD/DM – month – date – 12/24hour – hour – minute.
Loading...
+ 3 hidden pages