Thermo Products XH1500 User Manual

Oil Heating

Mobile Home Furnaces

OME Series

Built Tough for Lifetime Comfort™

The Thermo Pride Story

Located right here in the United States, Thermo Pride
has a 60-year heritage of superior workmanship,
product innovation and small town
work ethic. We are committed to
handcrafted products and hometown
values like comfort, reliability,
durability, quiet operation and
high eficiency. You will appreciate
the peace-of-mind that comes
from knowing your Thermo Pride
Mobile Home and Cottage furnace
is anything but a mass-produced, low-cost compromise
between quality and price.

Replace Your Old Furnace with Thermo Pride

When your current furnace fails, you’ll want to replace
it with one that is both dependable and economical. The
Thermo Pride Oil Mobile Home furnace is designed and
built speciically as a replacement furnace.

We use only the inest construction materials and controls.
Nowhere is this more evident than in the heat exchanger,
which incorporates our time-tested highly eficient and
durable Octatherm™ design.

The Octatherm™ Advantage

For over ifty years, our Octatherm heat exchanger has
been used in Thermo Pride oil furnaces. The
time-tested, eight-sided design
is at the heart of Thermo Pride’s
reputation for high eficiency,
reliability and durability.

Thermo Pride’s revolutionary
Octatherm design forces lue gases
into a high rate of agitation as they
pass through the heat exchanger.
This increases heat transfer and eficiency, resulting in
more uniform surface heating.

“Peace of Mind”
Lifetime Limited Warranty

Since 1955, Thermo Pride has stood behind their heat
exchangers with the
industry’s only non­prorated, automatically
transferred warranty. In
addition a full 10-Year Parts Warranty comes standard at
no additional cost.

Efϔiciency

Thermo Products is proud to be an
ENERGY STAR(R) Partner. Many of our
products are ENERGY STAR qualiied.
Products that have earned the ENERGY
STAR are designed to protect the
environment through superior energy
eficiency. Ask your Thermo Pride dealer
about qualiied units.

Made in the USA

We’re proud that Thermo Pride
furnaces are manufactured in the
United States out of American
steel. Thermo Pride oil products
have also earned the industry­respected certiication for safety
from Underwriter’s Laboratory
(UL).

Optional combustion

air connection

Durable reinforced

interlocking steel casing

with powder coated ϐinish

Highly efϐicient, 16-gauge

aluminized steel Octatherm

heat exchanger

Top-quality

control system

Easy-access service port

Foil-faced ϐiberglass insulation

High-efϐiciency,

direct-vent oil burner

Designed to ϐit

many existing bases

Insulated blower compartment

High-torque, low-speed,

™

direct-drive motor

•

3 Ton A/C Capacity with

Quiet, over-sized blower

Easy access, easy cleaning,

permanent, washable ϐilter

Partitioned burner and

blower compartments

Pre-purge, post-purge,

positively closing solenoid oil

burner is safe and odor-free

Intermittent ignition system

B5 approved for Beckett burners

MODEL NUMBER OME-72D36

MODELNUMBEROME72D36OME-72D3

6

T

Heat Input Rate (BTUH) 70,000 85,000
Output (BTUH)
Seasonal Effi ciency
Dimensions HxWxD 57” x 18” x 24-3/4”
Warm Air Outlet WxD
Return Air Inlet 14” x 22” Louvered
Largest Recommended A/C 3 tons
Temperature Rise 65°
Vent Pipe Size 4”
Approximate Shipping Weight 240 lbs.

1. BTU output based on seasonal eficiency determined by US Department of Energy test results.

2. Seasonal eficiency (Also called AFUE-Annual Fuel Utilization Eficiency) ratings are based on tests following US Department of Energy procedures.

All speciications are subject to change without notice.

Go to www.energystar.gov for qualiing unit details.

1

2

Low Fire

60,000 72,000

86%

12” x 12”

OME-72D36

High Fire

Thermo Products offers a complete line of heating/cooling equipment. The addition of accessories to your system can

hermo Products offers a complete line of heating/cooling equipment. The addition of accessories to your system can

provide greater comfort and a healthier indoor environment.

4” Straight Stainless Steel Vent Pipe

Connects the furnace to the roof jack assembly.

Combustible Floor Base

When not using a coil cabinet you’re required
to use this loor base

Cottage Base

Used whenever the
furnace is installed in a
home, garage or addition.

whenever a furnace is
installed on combustible
material. It is shipped
with a warm air
duct connector and
combustion air chute.

Air Conditioning Coil
Cabinets

The base comes with
knock-outs for all combustion applications.

The OME furnace is air
conditioning-ready. The coil
cabinet replaces the loor
base for up to 3 tons of air
conditioning.

Roof Jack Assembly

Needed as a chimney for proper venting
in mobile homes. Available in one, two
or three foot lengths.

Scan this code
with your smart
phone to visit our
website.
www.thermopride.com

Visit us at www.thermopride.com

PL041005 Rev 072213

© 2013 Thermo Products, LLC