Thermo Products OMC-70 User Manual

Mobile Home
Oil Heating
from ermo Pride
Built Tough for Lifetime Comfort™
1
Cozy, Comfortable Mobile Home Oil Heating
e ermo Pride Story
Located in North Judson, Indiana, ermo Pride has a fifty-year heritage of superior workmanship, product innovation and small town work ethic. We are committed to handcrafted products and hometown values like comfort, reliability, durability, quiet operation and high efficiency. You will appreciate the peace-of­mind that comes from knowing your ermo Pride Mobile Home and Cottage furnace is anything but a mass-produced, low-cost compromise between quality and price.
Replace Your Old Furnace with ermo Pride
When your current furnace fails, you’ll want to replace it with one that is both dependable and economical. e ermo Pride OMC Mobile Home furnace is designed and built specifically as a replacement furnace.
We use only the finest construction materials and controls. Nowhere is this more evident than in the heat exchanger, which incorporates our time-tested highly efficient and durable Octatherm™ design.
e Octatherm™ Advantage
For over fifty years, our Octatherm heat exchanger has been used in ermo Pride oil furnaces. e
time-tested, eight-sided design is at the heart of ermo Pride’s reputation for high efficiency, reliability and durability.
“Peace of Mind” Warranty
e warranty tells you just how much confidence a manufacturer has in their product. Since 1955, ermo Pride has backed our heat exchangers with the industry’s only transferable Limited Lifetime Warranty. We also offer a full five-year parts warranty at no additional cost. Together, these make up ermo Pride’s unique “Peace of Mind” warranty…our assurance to you that, when you buy ermo Pride, you buy the best.
Comfort
Comfort is the purpose behind any heating system. “Temperature rise” makes the difference between feeling warm, comfortable air from the registers in your home or the feeling of cool air blowing across you when the furnace is on. It is the difference in air temperature from the point where it enters the furnace to the point where it exits. e higher the temperature rise—the warmer the air when it enters the rooms of your home. ermo Pride has a standard 70°F temperature rise across its full line of oil furnaces. is is an air temperature up to 30°F warmer than the competition—providing a far superior comfort level. e OMC furnace surpasses this level of comfort with an 85% temperature rise.
ermo Pride’s revolutionary
Octatherm design forces flue gases into a high rate of agitation as they pass through the heat exchanger. is increases heat transfer and efficiency, resulting in more uniform surface heating.
Temperature Rise
2
Features and Benefits
Durable reinforced
interlocking steel casing
with powder coated finish
Highly efficient, 16-gauge
aluminized steel Octatherm™
heat exchanger
Top-quality controls and
control system
Easy-access clean-out ports
Foil-faced fiberglass insulation
High-efficiency,
direct-vent oil burner
Insulated blower compartment
High-torque, low-speed,
direct-drive motor
Quiet, over-sized blower
Easy access, easy cleaning,
permanent, washable filter
Partitioned burner and
blower compartments
Pre-purge, post-purge,
positively closing solenoid oil
burner is safe and odor-free
Intermittent ignition system
Suitable for Some Home Cottage Applications
Some homes are not suited for a full-duct furnace system. An addition to a home may also be more effectively heated using the OMC on a cottage base, which can have up to four regis­ters installed for gentle, floor-level heat delivery.
ree-room application with ductwork into two
rooms, and two grilles.
Additional rooms may be heated by connecting ductwork to the base, and then through the wall to adjacent rooms. No ductwork, grilles, or cutouts are provided with the base. e installer will cut the base as needed.
One-room application
with three warm-air
distribution grilles.
3
Accessories
ermo Pride offers a complete line of heating and cooling equipment. e addition of accessories to your system can provide greater comfort and a healthier indoor environment.
Combustible Floor Base
Required whenever a furnace is installed on combustible material. It is shipped with a warm air duct connector and combustion air chute. e base
4” Straight Stainless Steel Vent Pipe
Connects the furnace to the roof jack assembly.
Cottage Base
Used whenever the furnace is installed in a home, garage or
comes with knock-outs for all combustion applications.
Roof Jack Assembly
Needed as a chimney for proper venting in mobile homes.
addition. Grilles or ductwork may be cut in the base as needed.
Specifications
MODEL NUMBER OMC-70
BTU per Hour Input 85,000
BTU per Hour Output
Height of Casing 57”
Width of Casing 18”
Depth of Casing 24”
Warm Air Outlet
Diameter of Exhaust Vent 4”
Diameter of Combustion Air Intake 4”
Motor Horsepower 1/5 - 1 speed
CFM at .5 and .5 W.C. 780 650
Temperature Rise 85°
Number and Size of Permanent Filters 13-3/4” x 17-3/4” x 1”
Approximate Effective Heating Surface 3053 Sq. In.
Approximate Shipping Weight 210 lbs.
Seasonal Efficiency
* All dimensions in inches
1
BTU output based on 80% efficiency.
2
On outlet dimensions, the first dimension is width.
3
Seasonal Efficiency (also called AFUE - Annual Fuel Utilization Efficiency) ratings are based on tests following U.S. Department of
Energy Test Procedures.
All specifications are subject to change without notice.
1
2
3
71,000
12” x 12”
83.2%
Form No. PL81410041000-6/05-15Ms
© 2005 Thermo Pride - North Judson, IN
Printed in the U.S.A.
Phone: 574-896-2133
www.thermopride.com
4
Loading...