Thermo Products igh2-75 User Manual
Specifications and Main Features
In this segment, emphasis will be placed on the engineering attributes of the furnace as noted above. The detailed data of the furnace engineering parameters is provided as per specifications provided under IGH series.
Furnace Engineering Parameters: IGH Series
- Model No. IGH2-75
- BTUH Input: 75,000
- BTUH Output: 62,000
- Orifice Size: NAT - 41, LP - 53
- Temp. Rise (ΔT): 50-80°F
- Flue Diameter: 3’’
- Height of Casing: 52’’
- Width of Casing: 19’’
- Depth of Casing: 27’’
- Warm Air Outlet: 17’’x16’’
- Return Air Outlet: 25’’x16’’
- Number & Size of Filter: 1-16x25
- Approx. Effective Heating Surface: 3850 sq. in.
- Model No. IGH7-100
- BTUH Input: 100,000
- BTUH Output: 82,000
- Orifice Size: NAT - 41, LP - 53
- Temp. Rise (ΔT): 50-80°F
- Flue Diameter: 4’’
- Height of Casing: 52’’
- Width of Casing: 19’’
- Depth of Casing: 27’’
- Warm Air Outlet: 17’’x16’’
- Return Air Outlet: 25’’x16’’
- Number and Size of Filter: 1-16x25
- Approx Effective Heating Surface: 5055 sq. in
- Model No. IGH13-125
- BTUH Input: 125,000
- BTUH Output: 103,000
- Orifice Size: NAT - 41, LP - 53
- Temp. Rise (ΔT): 50 - 80 F
- Flue Diameter: 4"
- Height of Casing: 52"
- Width of Casing: 22"
- Depth of Casing: 27"
- Warm Air Outlet: 20"x16"
- Return Air Outlet: 26"x20"
- Number & Size of Filter: 1-20x26
- Approx. Effective Heating Surface: 6470 sq in.
Furnace Specifications: IGC Series
- Model No. IGC2-75
- BTUH Input: 75,000
- BTUH Output: 62,000
- Orifice Size: NAT - Al 53, LP - Al 53
- Temp. Rise (ΔT): 50 - 80 F
- Flue Diameter: 3"
- Height of Casing: 52"
- Width of Casing: 19"
- Depth of Casing: 27"
- Approx. Effective Heating Surface: 3850 sq in.
- Model No. IGC7-100
- BTUH Input: 100,000
- BTUH Output: 82,000
- Orifice Size: NAT - Al 53, LP - Al 53
- Temp. Rise (ΔT): 50 - 80 F
- Flue Diameter: 4"
- Height of Casing: 52"
- Width of Casing: 19"
- Depth of Casing: 27"
- Approx. Effective Heating Surface: 5055 sq in.
- Model No. IGC13-125
- BTUH inputs: 125,000
- BTUH Out: 103,000
- Orifice Sizes: NAT - AL 53, LP - AL 53
- Temp Rise etc: 50 - 80 F
- Flue Size: 4 inch flue pipe
- Casing Height: 52 inches
- Casing Width: 22 inches
- Casing Depth: 27 inches
- Approx Effective Heating Area: 6470 sq. in
Motor & Blower specifications (for All Models)
- HP of 4 speed motor (at high speed) IGH2-75: 1/2, IGH7-100: 1/2, IGH13-125: 3/4
- High Speed RPMs: 1075
- Run Capacitor: IGH2-75: 5 MFD, IGH7-100: 5 MFD, IGH13-125: 10 MFD
- Full Load Amps: IGH2-75: 7.7, IGH7-100: 7.7 IGH13-125: 11.8
- Electric characteristics: 120 volts 60 hertz 1 phase and less than 15 amps
Frequently Asked Questions
Q1: What are the gas types that the Thermo Pride furnace supports?
A1: Thermo Pride furnaces are designed to operate on natural gas NAT and liquefied petroleum LP gas.
Q2: What is the temperature rise for the furnaces?
A2: The temperature rise for the furnaces is range is 50-80.
Q3: What maintenance does a furnace require?
A3: The preventative maintenance tasks would entail the examination of the blower motor and its washing, as well as parts such as air filters and vent pipes which would require inspection for blockages or corrosion.
Q4: Is it permissible to place the furnace over combustible flooring?
A4: Combustible floors are appropriate for use with IGH model furnaces. For IGC model furnaces, their use is restricted to non combustible floors only.
Q5: What precautions are taken by the company to safeguard the investment made on the furnace?
A5: Warranty policies are provided for a specific period and warranty terms are set forth in the documentation provided by the manufacturer which are required to be followed during the installation process.
Q6: Which steps should be followed if there is an odor of gas in the area?
A6: If there is the odor of gas, do not attempt to turn on any appliance, do not operate any electrical switches or use a telephone and do ring your gas supplier from a neighbor’s phone.
Q7: Are harrowed motors supposed to be greased?
A7: Yes, the blower motor should be greased as stated on the nameplate on the motor, or where a relevant lubricant states to lubricate the motor annually.
Q8: What is the upper limit of BTU for IGH13-125 type?
A8: The BTU upper limit for IGH13-125 type is 125,000 BTU/hr.
User Manual
Loading...