Thermoplan Black&White3 CT, Black&White3 CTS, Black&White3 CBTM, Black&White3 CBT, Black&White3 CTM Technical Manual

REV-4

3.1

CT / CTS / CTM / CTMS / CBT / CBTM

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

PROGRAMMING

FOX1

REV-4

3.2

0 1 2 3 4 5 6 7 8 9 10

1

X X

2

X X X

3

X X X

4

X X S

5

X X S

6

X X S

7

X X S

8

X X S

9

X X S

10

X X S

11

X X S

12

X X S

13

X X S

14

X X S

15

X X S

16

X X S

17

X X S

18

X X S

19

X X S

20

X X S

21

X X S

22

X S S

23

X S S

24

S S

25

S S

26

S S

27

S S

28

S S

29

S S

30

S S

31

S S

32

S S

33

S S

0 1 2 3 4 5 6 7 8 9 10

34

S S

35

S S

36

S S

37

S S

38

S S

39

S

40

S

0 1 2 3 4 5 6 7 8 9 10

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

X Changes in content, corrections S New paging

Overview modications

Modications journal

Revision: Date: Modications Initials:

0 2009-04-24 Basic document, rst edition FC

1 2009-08-28 Complete revision MBO

2 2009-09-22 Added handling instructions BW3 Touchscreen RZ

3 2010-07-30 Adjustments to EPROM V1.91 / CBTM added RZ

4 2011-01-31 Various changes SO

5

6

7

8

9

10

Document: Programming

Page

REVISION

Page

REVISION

Page

REVISION

REV-4

3.3

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

Index

General handling 3.4 - 3.5

1. Basic settings 1.1 Set time and date 3.6 - 3.7

1.2 Change name of products 3.8 - 3.9

1.3 Check touchscreen for errors 3.10

2. Copy settings from machine to CompactFlash

®

-card 3.11 - 3.13

3. Copy settings from CompactFlash

®

-card to machine 3.14 - 3.16

4. Reset settings to default values 3.17 - 3.19

5. Replacing the EPROM 3.20 - 3.21

Menu navigation 3.22 - 3.28

General overview 3.29

Overview programming 3.30 - 3.40

REV-4

3.4

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

Using the different service codes the technician can

access and program the individual beverage settings.

The following pages explain how to navigate within the programming parameters.

Display Product keys Function keys

FUNCTION KEYS

Clear

Step

Back

Func1

Func2

+

-

Used to activate functions and clear counters in the diagnostic menu

Step forward in programming mode, enter submenus in diagnostic menu

Step backwards in programming mode

Set time and date

No function

Settings in programming mode, step forward and backwards in diagnostic menu

+

Clear

-

Step

Back

Func 1 Func 2

SERVICE CARD

General handling

Note:
The display pictures used in this section are from a CTMcool and may have minor differences depending on the used machine type.

REV-4

3.5

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

Service Levels

By entering different Service Codes you can enter different Service Levels:

Service Level 1: Code 1111

Enter the parameter menus to change settings on products and machine conguration for one access.

Service Level 2: Code 1112 (gets deactivated!!!)

Enter the parameter menus to change settings on products and machine conguration for several accesses.
Access is granted as soon as you push upper left corner (no code needed until machine is turned off and on again).

Service Level 4: Code 4444
Enter the FOX Touchscreen settings. In this menu you can change time and date or save your machine settings to a
CompactFlash

®

-card or vice versa.

To access the different Service Levels do as follows:

To exit the different Service Levels do as follows:

1. Tap on „Ready“ on the upper left display section.

2. The „Enter PIN“ window appears. Enter the desired PIN and conrm with .

Service Level 1 / 2:

As soon as you touch the upper left corner you will exit the Service Level.

Service Level 4:

By pressing the

-button you can step back to the previous screen. Step back until Service Level 1 (parameter menu)

appears, then touch the upper left corner to exit the Service Level.

General handling

23

1

56

4

89

7

Enter PIN

****

REV-4

3.6

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

1.1 Set time and date

To set time and date do as follows:

1. Tap on „Ready“ on the upper left display section.

2. The „Enter PIN“ window appears. Enter Code 4444 and conrm with .

3. The following screen appears:

Basic settings

23

1

56

4

89

7

Enter PIN

****

REV-4

3.7

Zeiteinstellungen

Automatische Sommerzeitumschaltung

Aktuelle Uhrzeit

Automatik ist eingeschaltet

13:28:30

Datumseinstellungen

September 2009

Mo Di Mi Do Fr Sa So

1234 5 6

87910 11 12 13

1514 16 17 18 19 20

2221 23 24 25 26 27

2928 30

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

4. By pressing on „Set Date/Time“ a popup window appears to set the time. Use the arrow

buttons and to set the current hour, minute and second. Furthermore you can activate
the automatic change to daylight-saving time.
Conrm the new settings by pressing the -button.

5. A new window appears. Use the arrow buttons and to

set the current month and year. To set the current day simply tap it on the screen.

Conrm the new settings by pressing the -button.

It‘s also possible to set time and date in Service Level 1.
Enter with Code 1111 and press on

Func1

.

Basic settings

REV-4

3.8

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

1.2 Change name of products

The displayed names of the products can be customized. To change the names do as follows:

1. Enter Service Level 4. The following screen appears:

2. Press on „Edit Product Names“ to start customizing the names.

Tap on the product you wish to change:

Basic settings

REV-4

3.9

edit product name P01

espresso

12345 67890

a

CAPS

CTRL

SHIFT

sdfghjkl

@

qwertzuiop

yxcvbnm

è
é

Ä
ä

_

-

ÖöÜ

ü

,
.

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

3. Enter the new name and conrm by pressing on .

4. Now you can see your changes. To save the new settings, exit by pressing on

and conrm the changes in the next window.

Basic settings

REV-4

3.10

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

1.3 Check the touchscreen for errors

If the touchscreen is not responding correctly, a program can be started
to check the functionality of the screen.

1. Enter Service Level 4. The following screen appears:

2. Press on „Touch“ to start the test-program.

After every touch on the screen a red „dot“ should appear on the same spot.

If the „dot“ does not appear or at the wrong position, the screen has to be either
repaired or replaced.

3. To exit the test-program touch the screen on any position for at least 2 seconds.

Basic settings

REV-4

3.11

SECTION 3

© 2009 by Thermoplan AG, Subject to change

Technical Manual

2. Copy settings from machine to CompactFlash®-card

To save the customized product settings to a CompactFlash®-card do as follows:

1. Tap on „Ready“ on the upper left display section.

2. The „Enter PIN“ window appears. Enter Code 4444 and conrm with .

3. The following screen appears:

Copy settings from machine to CompactFlash®-card

23

1

56

4

89

7

Enter PIN

****

REV-4

3.12

© 2009 by Thermoplan AG, Subject to change

SECTION 3

Technical Manual

4. Press on „Save/Restore Data“. The following screen appears:

5. By pressing „Save Product Data“ the settings will be copied to the card.

After some seconds the button turns green and reads „Product Data saved“.

6. The settings are saved successful. Exit the menu by pressing on .

The following screen appears:

Copy settings from machine to CompactFlash®-card