Thermoline Scientific Equipment TGO-80W, TGO-150W, TGO-240W Operating Instructions Manual
OPERATING
INSTRUCTIONS
FOR:
MODEL: TGO-80W, 150W, 240W
GLASSWARE DRYING OVEN
Thermoline Scientific Equipment Pty. Ltd.
ABN 80 000 859 129
10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill Park DC NSW 1851
Phone: (02) 9604 3911 International: 61 2 9604 3911
Fax: (02) 9725 1706 International: 61 2 9725 1706
Email: thermoline@thermoline.com.au Web: www.thermoline.com.au
Models TGO-80W, 150W, 240W Glassware Drying Oven M an ual
26-1-16
2
Introduction:
Thank you for selecting this equipment from the large range of products
manufactured & imported by Thermoline Scientific.
This manual covers the operation, cleaning, & maintenance instructions for this
equipment. Incorrect operation or use can cause harm or damage to the equipment,
therefore it is very important that you read, understand, and implement the instructions, to
ensure reliable operati on. Please keep this manual in a safe place for future reference.
LIST OF CONTENTS:
INTRODUCTION:
2
LIST OF CONTENTS:
2
UNPACKING:
2
USE AND FUNCTION:
2 & 3
LOCATION & INSTALLATION:
• Location:
• Mains connection:
• Control Panel
3 to 5
OPERATION:
• Changing the temperature:
• Setting duration time.
• High Temp Safety.
• Loading.
5 to 7
CLEANING:
8
Calibration:
8 & 9
WARRANTY:
9 & 10
UNPACKING:
Remove the equipment from the packing material and check for damage. Notify the detail
of any damage to your supplier or to Thermoline Scientific without delay.
Retain the packing mat er i al s until the eq ui pm ent has bee n thor oug hly tested.
USE & FUNCTION:
The Thermoline glassware drying ovens are ideal for providing effective drying of
laboratory equipment and removal of moisture from glass beakers/flasks etc.
• Temperatures can be controlled accurately from ambient +10ºC to +110ºC.
• Digital temperature control with set temperature and internal temperature displayed
to one decimal place.
• Electronic control of he ati ng ele men t for optimum temperature control.
• Timer function available on temperature control to turn off heating after a pre-
determined time.
• In-built over temperature feature in the digital temperature control. If the
temperature rises above the set value by more than 3ºC, the heating is shut down.
• High temperature safety thermostat (operator adjustable).
• Fan forced air circulation, with 2 fan speeds.
• Adjustable air exhaust v ent .
• Adjustable open wire shelves.
• Viewing door.
Models TGO-80W, 150W, 240W Glassware Drying Oven M an ual
26-1-16
3
These drying ovens will operate from a standard 240 volt, 50Hz, 10 amp general
purpose power outlet.
LOCATION & INSTALLATION:
Location:
Place the oven in a well ventilated area on a firm level surface. Please note that all
models will generate some heat as a normal part of operation and some of the surfaces
will be hot to touch.
The exhaust vent at the rear of the oven has a cover over it so that the vent cannot
be placed up against a wall. When being used for drying purposes there will be warm
moist air being discharged from this vent, please take this into account when determining a
location for the oven.
The TGO-80W and the TGO-150W are suitable for bench mounting, but the larger
TGO-240W is meant to be free standing.
Model:
TGO-80W
TGO-150W
TGO-240W
Internal Dimensions:
500 x 400 x 400 (WDH)
600 x 500 x 500 (WDH)
600 x 500 x 800 (WDH)
External Dimensions
620 x 520 x 620 (WDH)
720 x 620 x 720 (WDH
720 x 620 x 1020 (WDH
Capacity
80 litres
150 litres
240 litres
No of shelves
2 2 3
Electrical rating
240 volts, 7 amps.
240 volts, 8.5 amps.
240 volts, 10 amps.
Do not place anything on top of the oven, in particular do not block off the
ventilation slots that are used to keep the fan motor cool.
Mains connection:
These cabinets are suitable for connection to a standard 240 volt, 50Hz, supply. A
dedicated outlet should be used for the supply, do not use power boards or the like. A 3pin moulded plug is fitted as standard to the mains lead.
CONTROL PANEL:
1: Layout:
Loading...