thermital TBSS 150, TBSS 430, TBSS 200, TBSS 300, TBSS 550 Installation, Operation And Maintenance Manual

TBSS 150-200-300-430-550 TBSS 800-1000

TBSS

INSTALLATION, OPERATION AND

MAINTENANCE MANUAL

This manual, Code 20128955 - Rev. 2 (01/18) comprises 8 pages.

2

ENGLISH

GENERAL INFORMATION

GENERAL INFORMATION

RANGE

MODEL CODE

TBSS 150 20124177
TBSS 200 20124178
TBSS 300 20124179
TBSS 430 20124180
TBSS 550 20124181
TBSS 800 20132275
TBSS 1000 20132276

ACCESSORIES

For a complete list of accessories and details of their compati­bility, refer to the Catalogue.

Dear heating engineer,
We would like to congratulate you on having recommended a

T Storage cylinder unit: a modern product that's

capable of ensuring a high degree of reliability, efficiency,
quality and safety.
While your technical skills and knowledge will certainly be
more than sufficient, this booklet contains all the information
that we have deemed necessary for the device's correct and
easy installation.

Thank you again, and keep up the good work,

Thermital

CONFORMITY

T storage cylinders conform to DIN 4753-3 and

UNI EN 12897 standards.

CONTENTS

The following symbols are used in this manual:

b

CAUTION! =

Identifies actions that require caution and

adequate preparation.

a

STOP! =

Identifies actions that you MUST NOT do.

GENERAL SAFETY INFORMATION

b

Check that the product is complete, undamaged and as
ordered as soon as you receive it. Report any discrepan­cies or damage to the T dealer who sold it.

b

This product must be installed by a legally qualified heat­ing engineer. On completion of the installation, the install­er must issue the owner with a declaration of conformity
confirming that the installation has been completed to
the highest standards in compliance with the instructions
provided by T in this instruction manual, and
that it conforms to all applicable laws and standards.

b

This product must only be used for the purpose for which
it is designed and made, as specified by

T.

T declines all responsibility, contractual or

other, for damage to property or injury to persons or ani­mals caused by improper installation, adjustment, main­tenance or use.

b

The product must be serviced at least once a year. Servic­ing must be arranged in advance with the T
Technical Assistance Centre.

b

All servicing and repairs must be performed by a quali­fied heating engineer.

b

If water leaks from the storage cylinder, turn off the water
supply and contact T’s Technical Assistance
Centre or a qualified heating engineer immediately.

b

If the product is not going to be used for an extended
period of time, contact the manufacturer’s Technical As­sistance Centre to have at least the following operations
performed:

- Close the shut-off cocks for the domestic hot water cir­cuit

- Shut down the boiler connected to the storage cylinder
as instructed in its own manual

- Switch the storage cylinder OFF at the control panel (if
fitted) and at the mains power switch

- Drain the central heating circuit and domestic hot water
circuit if there is any risk of freezing.

b

This instruction manual is an integral part of the prod­uct. It must be kept safe and must ALWAYS accompany
the product, even if it is sold to another owner or trans­ferred to another user or to another installation. If you
lose this manual, order a replacement immediately. Keep
the product purchase documents to be presented to the

T authorised Technical Assistance Centre to

request a service call under warranty.

This manual, Code

- Rev.
comprises
pages.

ENGLISH

General information

GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . 2

General Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . 3

Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

System layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Unpacking the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Assembly of the insulation and the lining (models 800 - 1000) . .

6

Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation in older systems and systems requiring

modernisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Water quality requirements. . . . . . . . . . . . . . . . . . . . . . . . . . 6

Water connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Recycling and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

END USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Temporary shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Preparing for extended periods of disuse . . . . . . . . . . . . . . 8

External maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3

ENGLISH

GENERAL INFORMATION

GENERAL INFORMATION

PRECAUTIONS

The operation of any appliance that uses electrical power de­mands that a number of fundamental safety precautions be
respected. In particular:

a

Never attempt to install the system without using suitable
personal protection equipment and without following all
applicable occupational safety standards.

a

Do not touch the product when barefoot or wet if it has
any electrical accessories installed in it.

a

Never clean or service the storage cylinder without first
turning the mains power switch OFF to disconnect all
electrical accessories (if fitted) from the mains electricity
supply.

a

Never pull, disconnect, or twist any electrical cables
coming from the appliance even if it is disconnected from
the mains electricity supply.

a

Do not expose the storage cylinder to the elements. It is
not designed for use outdoors.

a

Do not allow children or infirm persons to operate the
system unsupervised.

a

Do not dispose of packaging material into the environ­ment, or leave it within the reach of children, since it can
become a potential hazard. Dispose of packaging mate­rial in compliance with applicable legislation.

DESCRIPTION OF THE APPLIANCE

T

TBSS

boilers produce domestic hot water for

storage purposes and are available in seven different models.

Their most important technical features are:

- the storage cylinder and coil are specially designed
and shaped for optimum performance in terms of strati­fication, heat exchange and replenishment times

- internal glazing, bacteriologically inert, to ensure the
maximum hygiene of treated water, reduce limescale
deposits and make cleaning operations easier

- CFC-free polyurethane insulation and an elegant exter­nal casing reduce heat loss

- a flange is provided for easy cleaning and maintenance
of the anti-corrosion magnesium anode.

IDENTIFICATION

The T

TBSS

solar heaters can be identified by:

Data plate

This lists the technical specifications and performance of
the product.

BALLON

Modele
Model

Fabrication

Code

Année

W

l

bar

W

kW

l/1'

BOLLITORE

Modello

Codice

Matricola

Anno

m

2

kW

T067850IFE

T067850IFE

BOILER

Serial number

Year

V-Hz

Potenza elettrica assorbita
Puissance élect. absorbée
Electrical consumption

Alimentazioneelettrica
Alimentat. élect.
Power supply

Dispersioni secondo EN 12897
Déperditions selon EN 12897
Heat loss according to EN 12897

Matricola
Fabrication
Serial number

Modello
Modele
Model

Max pot. assorb.
Puiss. absor.
Power abs.

Code

Massima potenza assorbita [T° Primario 80°C]
Puissance absorbée serpentin [T° Primaire 80°C]
Power absorbed by the coil [T° primary 80°C]

Produzione acqua calda sanitaria - serp. [∆T20°C]
Production eau chaude sanitaire - serp. [∆T 20°C]

Domestic hot water production – coil [∆T 20°C]

Superficie serpentino
Surface serpentin
Coil heat exchange surface area

Press. esercizio max.
Pression service max.
Maximum working pressure of storage cylinder

Capacità del bollitore
Capacité ballon
Storage cylinder capacity

Collegamento di terraobbligatorio - Raccordement a la terre obligatoire

Obligatory ground connection

RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY

RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY

Serial number plate

This specifies the serial number and model.

b

If these plates or any other means of clearly identify­ing the product are defaced, removed or lost, proper
installation and servicing may be rendered difficult.

b

On models 800 and 1000 the technical data plate and
serial number plate must be applied (by the installer)
after the insulation has been fitted.

SYSTEM LAYOUT

UAC

EAF

SB

P

M

1

3

6

5

4

2

1

Storage cylinder

2

Preset for lifting han­dles (accessory) and/
or device grounding
point

3

Coil

4

Flange for heater in­spection

5

Insulation

6

Cover

P

Socket

M

Guide

UAC

Domestic hot water

outlet

EAF

Domestic cold water

inlet

SB

Storage cylinder drain