Thermique LHGTW-24 Owner's Manual

Wall-Mounted Heated-Glass Towel Warmer

MODEL: LHGTW-24

Owner’s Manual

Instructions & Installation Procedures

READ AND SAVE THESE INSTRUCTIONS

INSTALLER: THESE INSTRUCTIONS SHOULD BE LEFT WITH THE OWNER

SAFETY FIRST

CAUTION:

1. Read this entire instruction manual thoroughly
before beginning installation and save these
instructions.

2. Thermique
licensed electrician professionally install the
Towel Warmer.

3. BE CERTAIN ELECTRICITY IS SHUT OFF
AT MAIN PANEL BEFORE INSTALLING,
WIRING or SERVICING your Towel Warmer.

4. Your Thermique
must be properly grounded. All wiring must be
in accordance with the National Electric Codes
and Local Codes.

TM

Technologies requires that a

TM

Heated-Glass Towel Warmer

5. Follow instructions accurately to make
certain the Towel Warmer is properly
attached to the wall. FAILURE TO
FOLLOW THESE STEPS COULD
RESULT IN MALFUNCTION
AND/OR INJURY.

6. This Towel Warmer is not intended
for installation in a shower or other
wet areas.

7. To avoid possible fire hazard, please
use caution when placing delicates or
other fine materials on the Towel Warmer.
WATCH the fabric for visual or smell
warning of smoking fire hazard.

Wall-Mounted Heated-Glass Towel Warmer

MODEL: LHGTW-24

Installation and Operating Instructions

READ COMPLETELY BEFORE BEGINNING

STEP 1: INSPECT THERMIQUE TOWEL WARMER

A. Unpack the Thermique Heated-Glass Towel Warmer carefully to avoid any damage or loss of any part. Before

assembling and installing your towel warmer, remove all parts from the shipping carton and check them against
the parts list below. Before discarding packing material, be certain that all parts are present.

B. If the Thermique Heated-Glass Towel Warmer appears damaged in any way, please return it to the store where it was

purchased, call Thermique customer service at 312-326-9193, or contact your local authorized Thermique dealer for
assistance in obtaining service. For service, a pre-authorization is required before returning the Towel Warmer or
Towel Warmer parts.

WARNING! NEVER INSTALL OR OPERATE A DAMAGED TOWEL WARMER.

Parts List: For proper installation, performance, and warranty coverage, use only genuine Thermique parts.

Part #: HGMM00061-1

Part #: HGSA00176-X
Description: Towel Warmer Assembly
Quantity: 1

Part #: HGMM00004-1
Description: Mounting Bracket
Quantity: 4

Part #: HGMM00005-X
Description: Mounting Bracket Cover
Quantity: 4

Part #: HGMM00006-X
Description: Mounting Posts
Quantity: 4

1

1

1

When ordering replacement parts, use these codes

(part no. - X) to specify hardware nish options.

Description: Switch Cover Plate
Quantity: 1

Part #: HGMM00005-X
Description: Toggle Bolts
Quantity: 8

Part #: HGMM00006-X
Description: Wire Nuts
Quantity: 4

Part #: HGMM00093-1
Description: Wood Screws
Quantity: 8

1

1

Part #: HGCT00169-1
Description: Controller
Quantity: 1

-X Finish -X Finish

-1 Polished Nickel -4 Oil Rubbed Bronze

-2 Rustic Bronze -5 Brushed Nickel

-3 Polished Brass -7 Chrome