How it Works
Therma-Tru
Loading...
514
Installation Manual
13 pgs920.62 Kb0

Therma-Tru 500, SE978HD, SE969HD, SE960HD, 514 Installation Manual

...
Download
Therma-Tru® Light Commercial/Multi-Family - Doors and Frames
1
• Material shown on these drawings will be fabricated only after formal approval by the architect, receipt of approval hardware schedule, and all necessary hardware templates.
• All frames and doors shall be chemically washed, rinsed, and dried prior to receiving one coat of paint.
• Doors and frames will be reinforced for surface mounted hardware as required. Drilling and tapping for surface mounted hardware shall be applied by others.
• It will be the responsibility of the General Contractor to coordinate hardware locations.
• All frames will be supplied with the required wall and oor anchors as illustrated on the frame detail sheet.
• All frames and doors wll be tagged with shop marks. This schedule can be used to cross reference shop marks with architects marks.
• These drawings are not intended for use by other trades.
• Field welding, grinding, nishing, and attachment of eld splices by others.
DOOR HANDING CHART • All standard type hardware will be located at this
manufacturer’s standard locations as shown on the door and frame elevations. Hardware items such as panic exit devices, deadbolts, etc. will also be located at manufacturer’s standard locations unless specically advised.
• Installations of all glass and glazing to be performed by others.
• Doors, frames, and nished hardware to be installed by others.
• Anchor bolts and expansion shields for any type fastener to be furnished by others.
• All frames must be set absolutely plumb, square, and level.
• All frames will be supplied with rubber door silencers: three for single swing openings and two per header for double swing openings.
SHEET NUMBER:
OF
JOB NUMBER:
ARCHITECT:
LOCATION:
PROJECT:
FINISHED HARDWARE BY:
CONTRACTOR:
RECORD OF SUBMITTALS
SUBMITTED
RETURNED
1st
2nd
3rd
4th
RECORDED APPROVED DRAWINGS
DRAWN BY:
RECORDED APPROVED HARDWARE
GENERAL NOTES
OUTSIDE
LEFT HAND INSWING
OUTSIDE
RIGHT HAND INSWING
OUTSIDE
LEFT HAND REVERSE
OUTSIDE
RIGHT HAND REVERSE
SINGLE DOORS
RIGHT HAND REVER SE/
LEFT HAND OUTSW ING
LEFT HAND REVERS E/
RIGHT HAND OUTSW ING
SIN GLE D OORS
OUTSIDE OUTSIDE
OUTSIDE OUTSIDE
LEFT HAND ACTIVE RIGHT HAND ACTIVE
LEFT HAND REVERSE ACTIVE RIGHT HAND REVERSE ACTIVE
PAIRS OF DOORS
LEFT HAND REVERS E ACTIV E/
RIGHT HAND OUTSW ING ACT IVE
RIGHT HAND REVER SE ACTI VE/ LEFT HAND OUTSWI NG ACTI VE
PAIR S OF DOORS
2
REMARKS
WIDTH HEIGHT
JOB NUMBER
PROJECT
SHEET NUMBER
OF
LOCATION
LOCK
CLOSER
FLUSH BOLTS
HRDWR. SET/ HDG.
GAUGE
SHEET ELEV.
LABEL
HINGE
JAMB DEPTH
OVERALL HEIGHT
ANCHOR
DOOR CONSTR.
DOOR OPENING
DOOR THICK.
SHEET ELEV.
SHEET SECT.
ITEM
QUANTITY
ARCH MARK
FROMTOSWING
FRAME CONSTR.
GAUGE
LOCATION
FRAME DATA
DOOR DATA
HARDWARE
Therma-Tru® Light Commercial/Multi-Family - Schedule
3
DOOR ELEVATIONS - FLUSH - LITED
DOOR ELEVATIONS - EMBOSSED - OPAQ UE
Therma-Tru® Light Commercial/Multi-Family - 22-Gauge & 24-Gauge Steel Doors
EXPOSED GLASS
SIZE: 3” x 33”
EXPOSED GLASS
SIZE: 4” x 25”
EXPOSED GLASS
SIZE: 5” x 20”
3”
4”
5”
33”
25”
20”
EXPOSED GLASS
SIZE: 10” x 10”
EXPOSED GLASS
SIZE: 22” x 28”
EXPOSED GLASS
SIZE: 22” x 34”
10”
28”
34”
EQUAL
EQUAL EQUAL EQUALEQUAL
EQUAL
10” 22” 22”
STY LE# 50 0STY LE# SE 978HDSTY LE# SE 969HDSTY LE# SE 960HDSTY LE# 51 4STY LE# SE 210HD
4
Therma-Tru® Light Commercial/Multi-Family - FG Doors
DOOR ELEVATIONS - SMOOTH
DOOR ELEVATIONS - GRAINED
STY LE# FC F160STYL E# FC F140STY LE# FC F100
STY LE# SS F960STY LE# SS F200ST YLE# S SF160ST YLE# S SF100
5
Therma-Tru® Light Commercial/Multi-Family - Standard Hardware Preps.
STEEL DEADBOLT PREP:
STEEL DEADBOLT PREP
STAMPED 1 1/ 18" x 2 3/ 4" OP TIONA L DEA DBOLT PRE P FOR STEE L FRA MES. AVAIL ABLE W IT H ADJU STA- FIT, ADJ USTA-TRIM , & S ECURA -FIT FRA MES.
STEEL TEE STRIKE PREP
STAMPED TEE STRI KE PR EP FO R STE EL FRA MES. AVAIL ABL E W ITH AD JU STA­FIT, A DJUSTA -TR IM & SE CUR A- FIT FRA MES.
STEEL LIP STRIKE PREP
STAMPED LIP STRIK E PRE P FOR STEE L FRA MES. AVAIL ABL E W ITH AD JU STA­FIT, A DJUSTA -TR IM & SE CUR A- FIT FRA MES.
STEEL 4 7/8" ANSI PREP
STAMPED 4 7/ 8" ANSI STRIK E PRE P FOR STEE L FRA MES. AVAIL ABL E WIT H A DJUSTA-FI T, ADJUS TA-T RIM & SEC URA-F IT FR AMES.
451/4" FR
OMTOP OF DOOR
447/8" FR
OMTOP OF DOOR
51/2" ST
ANDARD
LATCH PREPS
STANDA RD 1 1 /18" x 2 1/ 4" STR IKE WIT H OPT IONAL 1 1 /18" x 2 1/ 4"DEAD BOLT PR EP.
1 1 /4" x 8" MO RTISE LOCK P REP. NOTE : MORT ISE LO CK IS NOT OFF ERED WI TH LA NDMARK DOO RS.
45 1/ 4" FR OM TOP O F DOOR
44 7/ 8" FR OM TOP O F DOOR
5 1/2 " STANDA RD
5 1/2" ST
ANDARD
44 7/8" FR
OM TOPOF DOOR
BENCHMARKSTEEL ENTRANCEDOOR.
DEADBOLTHOLE: DRILLED THROUGHWOOD BLOCK.
DEADBOLTFILLERPLATE
DEADBOLTASSEMBLY
KNOBLATCH
LATCHFILLERPLATE
STANDARD LATCH PREP
44 7/ 8" FR OM TOP O F DOOR
KNOB LATCHLATCH FILLER PLATE
DEADB OLT ASSE MBLY
DEADB OLT FIL LER PL ATE
DEADB OLT HOL E: DRI LLED THROU GH WOO D BLOC K.
BENCH MARK STEEL ENTRA NCE DO OR
5 1/2 " STANDA RD
Note All dimensions are typical on both sides
:
4.080
1.062
.375
.500
1.500
2.500
3.500
3.985
2.040
.097 (12 Ga.)
Drill .295 / .300 Dia. Countersunk for a #10 flat head screw
5/8" Rad.
.018
4" x 4" HINGE DETAIL
.097 (12 G A.)
.018
5/8" RAD.
2.040
4.080
DRILL .295 /.300 DIA. COUNT ERSUN K FOR A #10 FLAT H EAD SC REW.
NOTE: ALL DI MENSI ONS ARE TYPICA L ON BOTH SI DES.
1.062
.375
.500
1.500
2.500
3.500
3.985
6
Therma-Tru® Light Commercial/Multi-Family - Hardware Locations
NOMINAL 2-0 2-4 2-6 2-8 2-10 3-0 3-6
ACTUAL 23 11/16" 27 11/16" 29 11/16" 31 11/16" 33 11/16" 35 11/16" 41 11/16"
NOMINAL 6-8 7-0 8-0
ACTUAL 78 5/8" 82 1/8" 93"
MORTISE PREP 45 1/4" 45 1/4" 59 5/8"
CYLINDRICAL PREP 44 7/8" 44 7/8" 59 1/4"
STANDARD 1 3/4" DOOR, HINGE and CYLINDER LOCK LOCATIONS:
DOOR WIDTH
DOOR HEIGHT
JOB NUMBER PROJECT LOCATION
SHEET NUMBER OF
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASEFRAME = 16-GA.
CLOSUREFRAME = 22-GA.
9 7/8”
30”
30”
UND ERCUT OPTI ONS:
STANDARD - 1 3/4"
PUB LIC AC CESS - 1 1 /8"
NO SILL OPTIO N - 3 /4"
STANDARD STEEL ENTRANCE DO OR S
NOMINAL WIDTH (FRAME OPENING)
ACTUAL WIDTH
9 3/4"
6-8
7-0
9 3/4"
YOUR REP. FOR MORE INFO.
2 3/8" OR 2 3/4" BACKSET (STD.)
5 1/2" DEADBOLT
FLOOR
SQUARE EDGE
CYLINDRICAL LOCK
30"
30"
30"
30"
MORTISE LOCK PREP
1/8"
ACTUAL HEIGHT
NOMINAL HEIGHT (FRAME OPENING)
1 3/4" UNDER
CUT STANDARD
NOTE S:
HIN GE BACK SET = 5/32"
22 GA. = .027 MIN.
24 GA. = .023 MIN
DOO RS UND ER 6- 8 OR OVER 7-0 A RE AVAILA BLE. CON TACT YOU R REP. F OR
MOR E INFO .
7
Therma-Tru® Light Commercial/Multi-Family - Custom Elevations/Applications
JOB NUMBER PROJECT LOCATION
SHEET NUMBER OF
8
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Fit® Frames - Single
2-0 x 6-8 2-4 x 6-8 2-6 x 6-8 2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8 3-6 x 6-8 4 7/8" ANSI (STD) 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
T-STRIKE w/ DEADBOLT
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
FRAME DETAIL
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
2-10 = 35" 3-0 = 37" 3-6 = 43"
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
EXISTING WALL
ADJUSTA-FITCLOSURE JAMB
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
ADJUSTA-FITFRAME
HINGE JAMB
4" x 4" HINGE
ADJUSTA-FITFRAME LATCHJAMB
A
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASEFRAME =16-GA.
CLOSUREFRAME =22-GA.
9 7/8”
30”
30”
ADJUSTA-FIT FRAMES
2 1/8”
1 13/16”
WALL SIZE
VARIES WITH
2 3/16”
5/8”
KERFED FOR
WEATHERSTRIPPING
ADJUSTA-FIT KERFED FRAME
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
2-0 x 6-8 2-4 x 6-8 2-6 x 6-8 2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8 3-6 x 6-8 4 7/8" ANSI (STD) 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
AVAILABLE THRESHOLDS
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-FIT FRAME SIDE JAMB
9
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Fit® Frames - Double
FRAME DETAIL
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
4-0 = 49 1/2" 5-0 = 61 1/2" 5-4 = 65 1/2" 6-0 = 73 1/2"
ADJUSTA-FITFRAME
HINGE JAMB
4" x 4" HINGE
ADJUSTA-FITFRAME INACTIVE HINGE JAMB
4" X 4" INACTIVE HINGE
EXISTING WALL
ADJUSTA-FITCLOSURE JAMB TYPICAL BOTH SIDES
ALUMINUM ASTRAGAL w/COMPRESSION WEATHERSTRIPPING
COMPRESSION WEATHERSTRIPPING TYPICAL BOTH SIDES
ACTIVE STEEL ENTRANCE DOOR
INACTIVE
DOOR
Adjusta-Fit
ADJUSTA-FIT FRAMES
2 1/8”
1 13/16”
WALL SIZE
VARIES WITH
2 3/16”
5/8”
KERFED FOR
WEATHERSTRIPPING
4-0 x 6-8 5-0 x 6-8 5-4 x 6-8 6-0 x 6-8 SPRING LOADED 4-0 x 7-0 BALL BEARING 5-0 x 7-0 5-4 x 7-0 4 7/8" ANSI (STD) 6-0 x 7-0 4 7/8" ANSI w/ DEADBOLT
HEIGHT -
NOMINAL
ROUGH
FRAME
OPENING
OPENING
ROUGH
ROUGH OPENING
ROUGH OPENING
OPENING
WIDTH
HEIGHT - STD
HEIGHT -
BARRIER FREE
NO SILL OPTION
49 1/2"
80 3/4"
80 1/8"
79 3/4"
79 3/4"
65 1/2"
80 3/4"
80 1/8"
79 3/4"
61 1/2"
80 3/4"
80 1/8"
79 3/4"
73 1/2"
80 3/4"
80 1/8"
49 1/2"
84 1/4"
83 5/8"
83 1/4"
83 1/4"
65 1/2"
84 1/4"
83 5/8"
83 1/4"
61 1/2"
84 1/4"
83 5/8"
83 1/4"
73 1/2"
84 1/4"
83 5/8"
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
ADJUSTA-FIT KERFED FRAME
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
AVAILABLE THRESHOLDS
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-FIT FRAME SIDE JAMB
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASEFRAME =16-GA.
CLOSUREFRAME =22-GA.
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
2-0 x 6-8 2-4 x 6-8 2-6 x 6-8 2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8 3-6 x 6-8 4 7/8" ANSI (STD) 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
T-STRIKE w/ DEADBOLT
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
10
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Trim® Frames - Single
FRAME DETAIL
EXISTING WALL
ADJUSTA-TRIM CLOSURE JAMB
COMPRESSION
WEATHERSTRIPPING
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
2-10 = 35" 3-0 = 37" 3-6 = 43"
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
WOOD SPACER
ADJUSTA-TRIM FRAME
HINGE JAMB
ADJUSTA-TRIM FRAME LATCHJAMB
4" x 4" HINGE
HARDWARE LOCATIONS
40 5/16”
“A”
7 1/4”
VARIES
“B” “B”
AVAILABLE THRESHOLDS
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-TRIM CLOSURE
ADJUSTA-TRIM FRAME
STEEL DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-TRIM FRAME SIDE JAMB
ADJUSTA-TRIM FRAMES
KERFED FOR
WEATHERSTRIPPING
VARIES WITH
WALL SIZE
2 3/16”
1/2”
1/2”
2”
2”
5/8”
5/8”
ADJUSTA-TRIM KERFED FRAME
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
X X X X X X X X
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X X X X
X X X X 2-0 x 6-8 X X 2-4 x 6-8 X X 2-6 x 6-8 2-8 x 6-8
2-10 x 6-8
3-0 x 6-8 3-6 x 6-8 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
2-0 x 6-8 2-4 x 6-8 2-6 x 6-8 2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8 3-6 x 6-8 4 7/8" ANSI (STD) 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
11
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Trim® Frames - Double
FRAME DETAIL
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
WOOD SPACER
ADJUSTA-TRIM
FRAME HINGE JAMB
4" x 4" HINGE
ADJUSTA-TRIMFRAME INACTIVE HINGE JAMB
4" x 4" INACTIVE HINGE
EXISTING WALL
ADJUSTA-TRIMCLOSURE JAMB TYPICAL BOTH SIDES
ALUMINUM ASTRAGAL w/COMPRESSION WEATHERSTRIPPING
COMPRESSION WEATHERSTRIPPING TYPICAL BOTH SIDES
ACTIVE STEEL ENTRANCE DOOR
INACTIVE
DOOR
Adjusta-Trim
AVAILABLE THRESHOLDS
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-TRIM CLOSURE
ADJUSTA-TRIM FRAME
STEEL DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-TRIM FRAME SIDE JAMB
ADJUSTA-TRIM FRAMES
KERFED FOR
WEATHERSTRIPPING
VARIES WITH
WALL SIZE
2 3/16”
1/2”
1/2”
2”
2”
5/8”
5/8”
ADJUSTA-TRIM KERFED FRAME
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASEFRAME =16-GA.
CLOSUREFRAME =22-GA.
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
X X X X X X X X
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X X X X
X X X X 4-0 x 6-8 X X 5-0 x 6-8 X X 5-4 x 6-8 6-0 x 6-8 4-0 x 7-0 5-0 x 7-0 5-4 x 7-0 6-0 x 7-0
Spring Loaded
Non-Removable Pin
"C" Rating 3/4 Hour
Frost Break Inswing: FBI
Ball Bearing
No Rating
Barrier Free
Compression
T-Strike w/ Opt. Deadbolt
HINGES
FIRE RATINGS
Two-Piece
Removable Pin
"B" Rating 1 1/2 Hour
THRESHOLDS
WEATHERSTRIPPING
STRIKE PREPS
84 1/4"
83 5/8"
83 1/4"
65 1/2"
84 1/4"
83 5/8"
83 1/4"
61 1/2"
83 1/4"
73 1/2"
61 1/2"
79 3/4"
73 1/2"
84 1/4"
49 1/2"
84 1/4"
83 1/4"
65 1/2"
80 3/4"
80 1/8"
79 3/4"
NO SILL OPTION
79 3/4"
80 3/4"
80 1/8"
79 3/4"
80 1/8"
80 3/4"
80 1/8"
BARRIER FREE
OPENING
WIDTH
HEIGHT - STD
49 1/2"
80 3/4"
ROUGH
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
83 5/8"
83 5/8"
X X X X
X X X X 2-0 x 6-8 X X 2-4 x 6-8 X X 2-6 x 6-8 2-8 x 6-8
2-10 x 6-8
3-0 x 6-8 3-6 x 6-8 2-0 x 7-0 2-4 x 7-0 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0 3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
12
Therma-Tru® Light Commercial/Multi-Family - Secura-Fit® Frames - Single
2-0 x 6-8 2-4 x 6-8 2-6 x 6-8 2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8 2-0 x 7-0 T-STRIKE (STD) 2-4 x 7-0 T-STRIKE w/ DEADBOLT 2-6 x 7-0 2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
24" - 24 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
79 7/8" - 80 1/4"
30" - 30 1/4"
79 7/8" - 80 1/4"
32" - 32 1/4"
79 7/8" - 80 1/4"
34" - 34 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
83 7/8" - 84"
36" - 36 1/4"
79 7/8" - 80 1/4"
24" - 24 1/4"
83 7/8" - 84"
30" - 30 1/4"
83 7/8" - 84"
32" - 32 1/4"
83 7/8" - 84"
34" - 34 1/4"
83 7/8" - 84"
36" - 36 1/4"
83 7/8" - 84"
4 7/8" ANSI w/ DEADBOLT
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
4 7/8" ANSI w/ DEADBOLT
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
> = GREATER THAN
MORTISED FOR 4 1/2” x 4 1/2” x .134" HINGES (3)
6-0 - 6-6
72” TO 78”
>6-6 - 6-10
> 78” - 82”
>6-10 - 7-2
> 82” - 86”
STRIKE LOCATION
NOMINAL FRAME OPENING HEIGHT
STANDARD
ANSI 115.3
2 3/4" STRIKE
OPTIONAL:
(1) ANSI 115.1 - 4 7/8"
(2) DEADBOLT 1 1/8" x 2 3/4"
(3) BLANK
NOTE:
SECURA-FIT FRAME =16-GA.
7 1/4”
30 1/4”
30 1/4”
VARIES
32 1/4”
32 1/4”
VARIES
25 1/2”
25 1/2”
VARIES
7 1/4”
7 1/4”
FRAME DETAIL
2-6 = 29 1/4” 2-8 = 31 1/4” 2-10 = 33 1/4”
2-6 = 30” - 30 1/4” 2-8 = 32” - 32 1/4” 2-10 = 34” - 34 1/4”
3-0 = 35 1/4” 3-6 = 41 1/4”
3-0 = 36” = 36 1/4” 3-6 = 42” - 42 1/4”
EXISTING WALL
WOOD DOOR STOP, INCLUDED
w/ SECURA-FIT FRAME
STEEL DOOR
SECURA-FIT FRAME HINGE JAMB
4 1/2” x 4 1/2”
HINGE
SECURA-FIT FRAME LATCH JAMB
COMPRESSION WEATHERSTRIPPING
MAGNETIC
WEATHERSTRIPPING
JOB NUMBER PROJECT LOCATION
SHEET NUMBER OF
AVAILABLE THRESHOLDS
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
WOOD DOOR STOP, INCLUDED w/ SECURA-FIT
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 79 5/8”
7-0 = 83 5/8”
6-8 = 79 7/8” - 80 1/4” 7-0 = 83 7/8” - 84”
SECURA-FIT FRAME SIDE JAMB
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
13
Therma-Tru® Light Commercial/Multi-Family - Secura-Fit® Frames - Double
4-0 x 6-8 5-0 x 6-8 5-4 x 6-8 6-0 x 6-8 SPRING LOADED 4-0 x 7-0 BALL BEARING 5-0 x 7-0 5-0 x 7-0 T-STRIKE (STD) 6-0 x 7-0 T-STRIKE w/ DEADBOLT
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
47 3/4" - 48"
79 7/8" - 80 1/4"
71 3/4" - 72"
79 7/8" - 80 1/4"
59 3/4" - 60"
79 7/8" - 80 1/4"
63 3/4" - 64"
79 7/8" - 80 1/4"
63 3/4" - 64"
83 7/8" - 84"
47 3/4" - 48"
83 7/8" - 84"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
71 3/4" - 72"
83 7/8" - 84"
59 3/4" - 60"
83 7/8" - 84"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
4 7/8" ANSI w/ DEADBOLT
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
EXISTING WALL
WOODDOOR STOP w/ COMPRESSION WEATHERSTRIPPING, INCLUDED w/ SECURA-FIT FRAME. TYPICAL BOTH HINGEJAMBS
ACTIVE STEEL ENTRANCE DOOR
ALUMINUM ASTRAGAL w/ COMPRESSION WEATHERSTRIPPING
SECURA-FIT FRAME INACTIVE HINGE JAMB
SECURA-FIT FRAME INACTIVE HINGE JAMB
4" x 4" INACTIVE HINGE
5-0 = 59 1/32" 5-4 = 63 1/32" 6-0 = 71 1/32"
5-0 = 59 3/4" - 60" 5-4 = 633/4" - 64" 6-0 = 71 3/4" - 72"
4" x 4" HINGE
INACTIVE
DOOR
Secura-Fit
FRAME DETAIL
JOB NUMBER PROJECT LOCATION
SHEET NUMBER OF
AVAILABLE THRESHOLDS
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
WOOD DOOR STOP, INCLUDED w/ SECURA-FIT
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 79 5/8”
7-0 = 83 5/8”
6-8 = 79 7/8” - 80 1/4” 7-0 = 83 7/8” - 84”
SECURA-FIT FRAME SIDE JAMB
ADJUSTABLESWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD: OPTIONAL
1 1/8"
NOTE: DEDUCT5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS FORBARRIER FREE THRESHOLD
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASEFRAME =16-GA.
CLOSUREFRAME =22-GA.
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use