INSTALLATION
INSTRUCTIONS
MINI-SPLIT
HEAT PUMP
FOR MODELS:
MS412HP13240A
MS418HP13240A
950-0024-REV-K 12-14-06
TABLE OF CONTENTS
MODEL NUMBERS……………………………………………………………………………3
UNIT PARTS & FEATURES……………………………………………………………………4
INSTALLATION DIMENSION DIAGRAM……………………………………………………5
SAFETY WARNINGS……………………………………………………………………………6
SELECTION OF INSTALLATION LOCATIONS………………………………………………7
INDOOR UNIT INSTALLATION………………………………………………………………9
OUTDOOR UNIT INSTALLATION……………………………………………………………12
TESTING………………………………………………………………………………………14
PRINCIPLE……………………………………………………………………………………16
SPECIFICATIONS………………………………………………………………………………18
WARRANTY……………………………………………………………………………………19
TECHNICAL SUPPORT
IF YOU NEED TECHNICAL SUPPORT PLEASE CALL
1-(704)504-8590
THERMAL ZONE Installation Kit is recommended.
Part number can be located on page 18.
2
MODEL NUMBERS
Heat Pump
SYSTEM MODEL Indoor Unit MS412HP13240EA
MS412HP13240A Outdoor Unit MS412HP13240CA
12,000 BTU 208-230 VAC
13 SEER
SYSTEM MODEL Indoor Unit MS418HP13240EA
MS418HP13240A Outdoor Unit MS418HP13240CA
18,000 BTU 208-230 VAC
13 SEER
3
INSTALLATION DIMENSION DIAGRAM
5
SAFETY WARNINGS
z Use Copper Wires only for Power Supply.
z Risk of electric shock can cause injury or death. Disconnect all electric power
supplies before servicing or installation
z Do not use excessive torque on flare nuts during connection of the
refrigeration tubes, or service valve on discharge line may be damaged.
z Do not install indoor unit in damp or wet locations.
z Electrical installation must be done by a qualified technician according to the
instruction manual and in accordance with local electrical standards.
z Certified Power supply conductors must be used.
6