P/N: ST0014U
Hard Drive not included*
Hardware Installation:
1. TOP View
2. Disk Installation
Hard Drive not included*
Introduction:
Thermaltake BlacX Duet eSATA & USB Docking Station easily connects all 2.5” or 3.5”
SATA hard drives, allowing PC or MAC system to instant access and store data onto
two hard drives.
Features:
Read & Write 2 Hard Drives simultaneously
Supports All 2.5” & 3.5” SATA Hard Drives up to 2TB
Hot-Swap Capability for Rapid Multi HDDs Access & Exchange
Supports eSATA Transfer Speed up to 3.0 Gbps
Supports USB 2.0 Transfer Speed up to 480 Mbps
Windows & Mac OS Compatible
Rapid Data Access & Exchange w/ Single eSATA or USB Cable Connection
8r-Over Docking Station Design maximizes Heat Dissipation & Exhaust
RoHS Compliance
SSG (Solid State Grip) Technology: Anti-Slippery Grasp Base
Specification:
Model#: ST0014U
HDD Interface: Two 2.5” / 3.5” SATA I / II
Host Interface: SATA to eSATA / USB 2.0
eSATA Transfer Rate: up to 3.0 Gbps (Max)
USB 2.0 Transfer Rate: up to 480 Mbps (Max)
SATA Compatible: SATA I & II
HDD Compatible: All 2.5” or 3.5” SATA
OS Compatible:
Windows 7 / Vista / 2003 / 2000 / XP
Mac OS X and later
Material: ABS Plastic
Power: DC 12V / 3A
Dimension:
140 (W) x 120.82 (D) x 69.49 (H) mm
5.51” (W) x 4.76” (D) x 2.74” (H)
Note:
All New / Raw hard drive(s) should follow hard drive / system
manufacturer guideline or visit Thermaltake FAQ Site to partition, format
and any necessary steps prior initial usage. Hard drive(s) not properly
partitioned or formatted will not work with BlacX Duet HDD Docking
Station. (See below for General Guideline to Partition & Format “NEW & RAW”
hard drives)
eSATA connection has the priority over USB connection.
1 eSATA cable controls both hard drives connectivity.
Quick Installation
1. Connect either eSATA or USB cable to the back of HDD Docking Station
and Computer’s eSATA or USB Port.
2. Connect the power cable to the back of HDD Docking Station and power
outlet.
3. Insert SATA Hard Drive (with connectors facing down) into HDD Docking
Station firmly. (One Hard Drive at a time)
4. Turn on the power switch.
5. No driver is needed. OS should find and installed the HDD Docking
Station automatically.
6. Wait until OS completes all installations before usage.
7. For all new / raw hard drive initial partition & format, please visit
Thermaltake FAQ Site:
http://www.thermaltakeusa.com/support/FAQ
Or, See below for General Guideline to Partition & Format “NEW & RAW”
hard drives
General Guideline to Partition & Format “NEW &
RAW” hard drives:
For Windows XP & Vista:
1. After connecting all necessary cable(s) to PC, insert the Hard Drive into
drive slot.
2. Power on the HDD Docking Station.
3. After OS recognizes the “New Hardware”, the driver will automatically
be installed.
4. Next, “Right Click” on My Computer (Computer for Vista OS) icon
on the desktop and choose option: Manage.
5. Under Storage > Disk Management, initialize the newly installed
hard drive. If the drive has been initialized before, the initialize option
will not be available.
6. Right Click on the newly added hard drive and choose New Partition.
7. Follow the onscreen New Partition Wizard to setup Partition and
Format hard drive. (Be Sure to Assign a Drive Letter).
8. Once Partition and Format is completed, hard drive is ready to use.
For Mac OS:
Mac OS 9.2 & earlier version does not support partition creation for external
hard drive. In order to create partition for external hard drive with Mac OS
9.2 & earlier, user will need to purchase additional 3rd party software to
create hard drive partition.
For Mac OS X, simply use the Disk Utility to Partition and Format external
hard drive as follows:
1. Select Disk Utilities in the utilities folder.
2. Choose newly added external drive and format it.
__________________________________________________________________________________
Note:
If you want to operate HDD Docking Station on both Windows and Mac
OS, it is recommended to format the hard drive in Windows and
choose FAT32 file format. Do not change set partition or format hard
drive. Otherwise, Windows OS will not be able to recognize the hard
drive.
__________________________________________________________________________________
For technical support request, please visit
http://www.thermaltakeusa.com/contact/TechSupport/techreq-form.htm
Or, please call support Hot-Line @ 1-800-988-1088.
Company Information
Thermaltake Technology, USA
Address: 525 Parriott Place, City of Industry, CA 91745
TEL: +1-626-968-9189
FAX: +1-626-968-7659
E-MAIL: info@thermaltakeusa.com
FCC and CE Radiation Norm
FCC
This equipment has been tested and found to comply with limits for Class B digital
device pursuant to Part 15 of Federal Communications Commission (FCC) rules.
CE
This equipment has been tested and found to comply with the limits of the
European Council Directive on the approximation of the law of the member states
relating to electromagnetic compatibility (89/336/EEC) according to EN 55022
Class B.
FCC and CE Compliance Statement
These limits are designed to provide reasonable protection against frequency
interference in residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed or used in accordance with the
instructions may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in television reception, which
can be determined by turning the equipment off and on. The user is encouraged to
try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected to
CAUTION!
The Federal Communications Commission warns the user that changes or
modifications to the unit not expressly approved by the party responsible for the
compliance could void the user’s authority to operate the equipment.
Loading...