![](/html/d3/d300/d300e7774eb3f09d0b8352f4c291cc3682d3f058bcc053e2b73986f7739e0592/bg1.png)
Venomous X - RT
Exploded View
FDB FAN & FAN Cover
Important! Before proceeding with installation, please check for the most up-to-date
instructions at www.thermalright.com
Venomous X Heatsink
Pressure Adjustable mounting plate
Component
1
6
2
7 10
8
3
9
4
Thumbscrew cap
Anchoring bracket mount
Screw pillar
Multiple support backplate
5
Venomous X Heatsink x1
1
Pressure Adjustable
5
mounting plate x1
Angled Wrench x1 Chill Factor 2 Thermal Paste x3
9 10
FDB FAN & FAN Cover x1
2
Screw pillar x4 Thumbscrew cap x4 Backplate cap for 775 platform x1
6 7
The Ultimate Cooling Solutions !
Multiple support backplate x1 Anchoring bracket mount x1
3
4
8
www.thermalright.com
![](/html/d3/d300/d300e7774eb3f09d0b8352f4c291cc3682d3f058bcc053e2b73986f7739e0592/bg2.png)
Installation Instructions:
Step 1:
775
1156
1366
Step 1:Installing Backplate cap for 775 platform and adjusting the
screw pillars.
(1).When installing on the 775 platform,you need to install the backplate
cap into the square opening on the backplate, please take note of the
installation direction, with the hooked edge facing down.
(For 775 platform only)
(2). Apply the screw pillars to its identical mounting holes needed.
Step 2:
Step 2:Installing the Anchoring bracket mount,
Place the Multiple support backplate under the
motherboard,place the 4 white plastic washers over the
4 screw-threads and then secure it by tightening it with 4
pcs of screw pillars, place the anchoring bracket mount
on top of the 4 screw pillars, and then tightening the 4
pillars with the thumbscrew caps.
Step 4: Step 5: Step 6:
Step 3:
Step 3:Apply a layer of Thermal Paste evenly to
the top of the cpu and to the bottom of the heatsink.
Step 4:Make the Pressure Adjustable mounting plate go
through the heatsink.
Step 7:
Step 7:Installation completed.
Step 5:
Step 6:Insert a 12cm fan inside the fan holder and hook
the fan holder claws to the heatsink fins on both sides of
the heatsink. Make sure the claws are tightly grasped onto
the fins. Plug fan power cord in to the fan power outlet.
pressure adjusting
nob
Angled Wrench
Max.
Min.
+ -
70 lbs 40 lbs
The Ultimate Cooling Solutions !
www.thermalright.com