Thermalright True Spirit 140 Power User Manual

31.05.2016 1 814256000956

True Spirit 140 Power

Technical Data

Length 155 mm (fan included)
Width 80 mm (fan included)
Height 171 mm (fan included)
Wight 885 g (fan included)
Fan Dimensions 140 x 152 x 26,5 mm
Fan Speed 300 - 1,300 rpm
Air Flow 28,7 - 125 m³/h
Noise 15 - 21 dB(A)
Fan Bearing Enhanced Hyperflow
Fan Connector 4-Pin PWM
Heatpipe 6 x 8 mm
Max. TDP 360 W
Manufacturer Number True Spirit 140 Power
Heatpipe 814256001106
Order Number 100700543

Logistical Data

Height (Packaging unit) 205 mm
Width (Packaging unit) 185 mm
Depth (Packaging unit) 110 mm
Gross weight (packaging unit) 1,24 kg
Height (shipping box) 240 mm
Width (shipping box) 420 mm
Depth (shipping box) 620 mm
Gross weight (shipping box) 14,22 kg
Pcs / shipping box 10
Code 814256000765
Harmonized code 84733080000
Country of Origin China

31.05.2016 2 814256000956

The True Spirit 140 "Power" is without a doubt the top model of the Thermalright "Value" series.

True to their motto “innovated – not imitated” Thermalright not only visually revised the heat sink for the recent version. The “Power” now comes with
six 8 mm thick heatpipes (previously 6 mm). Thus, the performance of the True Spirit 140 could be further improved.

This means that the flagship of the True Spirit series still does not need to fear comparison with considerably more expensive models. If you want
maximum performance at an affordable price and your case has the necessary width, the True Spirit 140 "Power" is certainly your best choice.

The copper heatpipes now are nickel-plated and offer in combination with the black anodized top-fin a very elegant appearance, probably unique in a
cooler in this price range. With the revised design, Thermalright combines the high-quality optics of the high-priced high-end coolers with the
award-winning, outstanding price-performance ratio of the proven "value" models.

The large heatsink is optimized for 140 mm fans. The narrow design of the cooler makes incompatibilities of the fans with adjacent memory banks
avoidable in most cases. The heat sink is equipped with six 8 mm thick, high-quality heat pipes, which are optimally positioned to effectively dissipate
the heat generated by the CPU to the 50 aluminum fins. The copper contact surface of the cooler is nickel-plated and highly polished.

The special partly angled fin design serves to minimize the air resistance and at the same time effectively contributes to a considerable reduction of
the system temperature. The distance between the aluminum fins was chosen so that the cooler provides a well above-average performance, even at
lowest fan speed. Of course, the most powerful cooler of the Thermalright “Value” series knows how to impress with its high quality processing.

A temperature-controlled TY-147 PWM-fan is included with the cooler. The rotation speed varies – depending on the CPU-temperature – between
300 – 1,300 rpm (+/- 15%), resulting in an air flow capacity of about 28,7 – 125 m³/h. Owing to its sophisticated design, the inner diameter of the fan
is even slightly greater than that of a conventional 140 mm fan (!). This mean that even at low speed and correspondingly lower noise, the capacity is
higher than the performance of most conventional 120 mm axial fans. For a sufficiently silent operation, the model uses seven blades in a special
"torpedo" design. Together with the optimized wings and streamlined frame design, this causes a particularly effective and at the same time also very
quiet air flow.

Corresponding to the claim of being the most powerful model of the series, a total of four specially designed fan clips are included. This allows the
installation of a second fan, if desired. The fans can be anti-vibration mounted with the enclosed AntiVibe-Pads (8 pcs included).

A universal mounting kit is included, which supports all actual Intel- and AMD sockets (Intel LGA775/1366/1156/1155/2011/1150/2011-3/1151* and
AMD AM2/AM2+/AM3/FM1/FM2/FM2+). The installation is simple and self-explanatory - an illustrated manual is included.

*We strongly recommend to use our specially designed 1151 Support Spacer when mounting the cooler on LGA11 “Skylake” CPUs. Please send us
an email, to receive them for free.