Thermalright Shaman User Manual

Installation Instructions:

Step 1:RAM heatsinks Installation Step 2:Multiple-thread Screw Installation

After removing stock cooler and RAM heatsinks, clean the surface of GPU and chipsets thoroughly.
Then install the RAM heatsinks A/B/C accordingly.

Step 3:Applying Thermal Paste Step 5:Backplate InstallationStep 4:Heatsink Installation

Please refer to the supported VGA list in the first
page, and mount the Multiple-Thread Screws into
its dedicated holes.

Apply the Thermal Paste to the base of the
heatsink and the surface of the GPU evenly.

After installing the Multiple-Thread Screws onto
the heatsink, make it to go through the mounting
holes on the VGA card.

Step 6:Screw Nut Installation Step 8:Installation completedStep 7:Fan Parts Installation

Turn to the back of the VGA card, and put on
washers on the exposed Multiple thread screws ,
then make the backplate to go through the exposed
thread screws.

Make the Translucent washers to go through the
exposed thread screws again after applying the
backplate,then secure it by tightening the
4 screw nuts.

Apply the Anti Vibration strips onto both cutting
edges of the heatsink, then pull both ends of the
2 fan clips and make it to go through the mounting
holes.

The Ultimate Cooling Solutions !

Attach the TY-140 Fan onto the Heatsink to finish
the installation.

www.thermalright.com