Thermalright
Macho Zero
Macho Zero
Assembly package
× 4 × 1
× 4 × 4
× 7
× 5
× 1
× 1
× 1
× 2
× 4
× 4
× 1
× 2
× 1
4
4
8
Macho Zero
Intel 775/1150/1155/1156/1366
Exploded View
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
Mounting Plate
M3L6 Screw
Anchoring Mount
Screw Nut
Motherboard
Heatsink Body
Intel Washer (small)
Mylar Film
Metal Back Plate
M3L10 Screw
1
Component
1
2
4 5 76 8
9
1110
14
Macho Heatsink Body ×1
1
Mounting Plate ×1
4 5 6
M3 L10 Screw ×5
7 8
AMD Washer (big) ×4
10
13
Fan Clip ×2
Mylar Film ×1 white cotton gloves ×2
16 17
Anchoring Mount ×1
2
Screw Nut ×4
Anti-Vibration Pad ×4
11
14
Ckill Factor III ×1 Screw driver ×1
12
16 1715
3
9
12
15
3
13
Metal Back Plate ×1
LGA2011 Type B
Screw Pillars x4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
The Ultimate Cooling Solutions!
www.thermalright.com
2
Installation Instructions:
- Please use the included gloves during installation to avoid nger prints on heatsink body.
Step 1:
Step 1 : Backplate Installation
Choose the platform (775/1150/1155/1156/1366) you are in use. Make four M3L10 Screw Pillars go
through the Metal Back Plate and the Mylar lm from bottom towards top.And then place the Metal Back
Plate on the table. Put the four Washers (for Intel) around the Screw Pillars.
Step 2:
Step 2 : 775 Back Plate Cap
Note: When installing on a 775 platform, please rst insert the Back Plate Cap into the opening on
the Back plate, make sure you have the Cap facing downwards. (Only for LGA775 platform, all other
platforms go directly to Step 3).
Step 3:
4
1
2
3
Step 4:
1150
1366
1155
775
1156
4
1
2
3
Step 3 : Place the motherboard on top of the
Back Plate. See the four Screw Pillars go
through the four holes around the processor
socket.Cap the four Screw Pillars with the four
Screw Nuts.Make sure the side with a washer is
facing the Back Plate.
3
Step 4 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts.
Use the four M3L6 Screws to fix the Anchoring
Mount on to the Screw Nuts.
Step 5: Step 6:
Step 5 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly. (A
flat edge, like a business card or an old credit
card would be benecial in spreading the thermal
paste.)
Step 6: Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make
Mounting Plate go through the Heatsink Body.
And then use the two M3L6 screws to secure the
Mounting Plate, one side at a time in several turns
to ensure balanced mounting.
Step 7: Step 8:
Step 7: Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the
M3L6 Screw underneath
the cooler.
Step 8 : First, compress (squeeze it together) the
fan duct so that it can easily t between the Macho
heatsink and the system exhaust fan at the rear of
your case. Connect the end with the Thermalright
logo of the fan duct to the rear case exhaust fan.
Step 9: Step 10:
Step 9 : by expanding the fan duct to connect the
back end to the Macho heatsink.
Step 10 : Installation completed.
The Ultimate Cooling Solutions!
www.thermalright.com
4
Macho Zero
Exploded View
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
M3L6 Screw
Mounting Plate
Anchoring Mount
Intel 2011
Heatsink Body
LGA2011 Type B Screw Pillars
Motherboard
5
Component
1
2
4 5 76 8
9
1110
14
Macho Heatsink Body ×1
1
Mounting Plate ×1
4 5 6
M3 L10 Screw ×5
7 8
AMD Washer (big) ×4
10
13
Fan Clip ×2
Mylar Film ×1 white cotton gloves ×2
16 17
Anchoring Mount ×1
2
Screw Nut ×4
Anti-Vibration Pad ×4
11
14
Ckill Factor III ×1 Screw driver ×1
12
16 1715
3
9
12
15
3
13
Metal Back Plate ×1
LGA2011 Type B
Screw Pillars x4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
The Ultimate Cooling Solutions!
www.thermalright.com
6
Installation Instructions:
- Please use the included gloves during installation to avoid nger prints on heatsink body.
Step 1:
Step 1 : Screw Pillar Installation
Place the motherboard (the processor installed) on top of the desk or a workbench. Fix the four included
LGA2011 Type B Screw Pillars into the heat-sink studs on the Intel ILM Assembly Frame around the
processor socket in a criss-cross pattern.
Step 2:
Step 2 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Pillars. Use the four M3L6 Screws to x the Anchoring Mount
on to the Screw Pillars, also in a criss-cross pattern to ensure balanced mounting.
1
Step 3:
4
1
4
3
2
3
2
Step 3 : Applying Thermal Paste
Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly. (A at edge,
like a business card or an old credit card would be benecial in spreading the thermal paste.)
7
Macho Zero
Step 4:
Step 4 : Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And
then use the two M3L6 screws to secure the Mounting Plate, one side at a time in several turns to
ensure balanced mounting.
Step 5: Step 6:
Step 5 : Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the
M3L6 Screw underneath
the cooler.
Step 6 : First, compress (squeeze it together) the
fan duct so that it can easily t between the Macho
heatsink and the system exhaust fan at the rear of
your case. Connect the end with the Thermalright
logo of the fan duct to the rear case exhaust fan.
Step 7: Step 8:
Step 7 : by expanding the fan duct to connect the
back end to the Macho heatsink.
Step 8 : Installation completed.
The Ultimate Cooling Solutions!
www.thermalright.com
8
Macho Zero
AM2/AM2+/AM3/AM3+/FM1/FM2
Exploded View
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
Mounting Plate
M3L6 Screw
Anchoring Mount
Screw Nut
Motherboard
Heatsink Body
AMD Washer (big)
Mylar Film
Metal Back Plate
M3L10 Screw
9
Component
1
2
4 5 76 8
9
1110
14
Macho Heatsink Body ×1
1
Mounting Plate ×1
4 5 6
M3 L10 Screw ×5
7 8
AMD Washer (big) ×4
10
13
Fan Clip ×2
Mylar Film ×1 white cotton gloves ×2
16 17
Anchoring Mount ×1
2
Screw Nut ×4
Anti-Vibration Pad ×4
11
14
Ckill Factor III ×1 Screw driver ×1
12
16 1715
3
9
12
15
3
13
Metal Back Plate ×1
LGA2011 Type B
Screw Pillars x4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
The Ultimate Cooling Solutions!
www.thermalright.com
10
Installation Instructions:
- Please use the included gloves during installation to avoid nger prints on heatsink body.
Step 1:
Step 1 : Backplate Installation
Choose the platform (AMD) you are in use. Make four M3L10 Screw Pillars go through the Metal Back
Plate and the Mylar lm from bottom towards top. And then place the Metal Back Plate on the table. Put
the four Washers (for AMD) around the Screw Pillars.
Step 2:
Step 2 : Back Plate Cap
Note: When installing on an AMD platform, please
rst insert the Back Plate Cap into the opening on the Metal Back plate, make sure you have the Cap
facing downwards.
Step 3: Step 4:
4
1
2
3
AMD
4
1
2
3
Step 3 : Place the motherboard on top of the Back
Plate. See the four Screw Pillars go through the
four holes around the processor socket. Cap the
four Screw Pillars with the four Screw Nuts in
a criss-cross pattern.Make sure the side with a
washer is facing the Back Plate.
11
Step 4 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts.
Use the four M3L6 Screws to fix the Anchoring
Mount on to the Screw Nuts.
Step 5: Step 6:
Step 5 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly. (A
flat edge, like a business card or an old credit
card would be benecial in spreading the thermal
paste.)
Step 6: Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make
Mounting Plate go through the Heatsink Body.
And then use the two M3L6 screws to secure the
Mounting Plate, one side at a time in several turns
to ensure balanced mounting.
Step 7: Step 8:
Step 7: Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the
M3L6 Screw underneath
the cooler.
Step 8 : First, compress (squeeze it together) the
fan duct so that it can easily t between the Macho
heatsink and the system exhaust fan at the rear of
your case. Connect the end with the Thermalright
logo of the fan duct to the rear case exhaust fan.
Step 9: Step 10:
Step 9 : by expanding the fan duct to connect the
back end to the Macho heatsink.
Step 10 : Installation completed.
The Ultimate Cooling Solutions!
www.thermalright.com
12
Macho Zero
Fan Installation (Optional)
Fan clips
Anti-Vibration Pad
13
Macho Zero
Step 1:
Step 1 : Apply Anti-Vibration padding to 4 corners on the heat-sink.
Step 2:
Step 2 : Put the fan clips into the dents on two sides of the heat-sink body.
Step 3:
Step 3 : Fan installation completed.
The Ultimate Cooling Solutions!
www.thermalright.com
14
Macho Zero
Technical Spec
Heatsink Specifications:
Dimension: Length 140mm x Width 102mm x Height 162mm
Weight: 710g
Heatpipe: 6mm heatpipe*6 units
Copper Base: C1100 Pure copper nickel plated
Fan Specification:
Dimension: L152mm x H140mm x W26.5m
Weight: 160g
Fan speed: 900~1300RPM (4-Pin PWM)
Fan noise: 17~21dBA MAX (4-Pin PWM)
Airflow: 28.3~73.6CFM MAX
Connector: 4 Pin (PWM Fan connector)
15
The Ultimate Cooling Solutions!
www.thermalright.com
16
The Ultimate Cooling Solutions!
www.thermalright.com
TEL: +886-2-8663-6630
FAX: +886-2-8663-6645
EMAIL: sales@thermalright.com
Loading...