Thermalright HR-09 User Manual
HR-09 Type4 Heatsink
Exploded View
Important! Before proceeding with installation, please check for the most up-to-date
instructions at www.thermalright.com
Installation
Push Pin
61x12x1 Thermal Pad
Component
HR-09 TYPE4
Heatsink
Mounting mechanism
Type B
Mounting mechanism Type A
Mounting mechanism
Type B
Mounting mechanism
Type A
Step 1: Thermal Pad Application
Apply 61x12x1mm thermal pad directly to
bottom of heatsink base
Step 2: Mounting Mechanism Selection
Select the appropriate mounting mechanism
that aligns with the mounting holes on your
motherboard. Insert at each end of heatsink
and then insert push-pins through holes on the
mounting mechanism.
Step 3: Removal of Stock Heatsink
Before installation of HR-09, remove stock
PWN heatsink.
Step 4: Heatsink Installation
Place HR-09 Type 4 heatsink directly onto the
PWN chips. Insert push pins through motherboard mounting holes and press down to secure
in place. Installation completed.
3
Parts Name Piece(s)
1
HR-09 TYPE4 Heatsink
2
4
1
5
2
61x12x1 Thermal Pad
3
Push Pin
4
Mounting mechanism Type A
5
Mounting mechanism Type B
The Ultimate Cooling Solutions !
1
1
2
2
2
www.thermalright.com
Loading...