Thermalright
AXP-100
AXP-100
Assembly package
× 4
× 4
× 7
× 5
× 5
× 5
× 1
× 1 × 1
× 1
× 1
× 4
× 4
× 5
× 1
4
4
4
8
AXP-100
Intel 775/1155/1156/1366
Exploded view
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
Heatsink Body
M3 L6 Screw
Anchoring Mount
120mm Fan
Screw Nut
Intel Washer(small)
Metal Back Plate
M3 L10 Screw
Backplate cap
1
Component
1
4
8
2
5
109
1413
Heatsink Body ×1
1
Mounting Plate ×1
4
LGA2011 Type B
7 8
Screw Pillars x4
AMD Washer (big) ×4
10
Thermal paste ×1
M3 L17 Screw ×5 M3 L30 Screw ×5
16 17
Anchoring Mount ×1
2
Anchoring Mount ×1
5
M3 L10 Screw ×5
AMD Washer (big) ×4
11 12
TY100 Fan×1
1413
3
6
11
7
12
15 16 17
Metal Back Plate ×1
3
Screw Nut ×4
6
M3 L6 Screw ×7
9
Backplate cap ×1
W3 L4
15
Screw ×5
The Ultimate Cooling Solutions!
www.thermalright.com
2
Installation Instructions:
Step 1:
Step 1 : Backplate Installation
Choose the platform (775/1155/1156/1366)you are in use. Make four M3L10 Screws go through the
Metal Back Plate from bottom towards top.And then place the Metal Back Plate on the table.
Put the four Washers (for Intel) around the Screw Cylinders.
Step 2:
Step 2 : backplate cap
Note: When installing on a 775 platform, please
rst insert the Back Plate Cap into the opening on
the Back plate. Make sure you have the Cap facing
downwards. (Only for 775).
Step 4:
Step 3:
Step 3 : Place the motherboard on top of the Back
Plate. See the four Screw Cylinders go through
the four holes around the processor socket.Cap
the four Screw Cylinders with the four Screw Nuts.
Make sure the side with a washer is facing the
Back Plate.
Step 5:
1366
1156
775
1155
Step 4 : Place the Anchoring Mount on the Screw
Nuts. Use the four M3L6 Screws to x
the Anchoring Mount on to the Screw Nuts.
3
Step 5 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly.
Step 6:
Step 6 : Mounting Plate Installation.
Place the Heatsink Body on top of the CPU. Make the Mounting Plate go through the Heatsink Body.
Then use the two M3L6 screws to secure the Mounting Plate.
Step 7:
Step 7 : Fan Installation
Place the included TY-100 onto the Heatsink Body. And then secure it by scewing on the four M3L17
Screws, though the fan’s mounting hole.
Step 8:
Step 8 : Installation completed
Plug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
The Ultimate Cooling Solutions!
www.thermalright.com
4
AXP-100
Exploded view
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
Heatsink Body
M3 L6 Screw
Anchoring Mount
120mm Fan
Intel 2011
Mounting Plate
Screw Nut
5
Component
1
4
9
13
Heatsink Body ×1
1
Mounting Plate ×1
4
M3 L10 Screw ×5
7 8
AMD Washer (big) ×4
10
TY100 Fan×1
16
M3 L30 Screw ×5
2
5
10
6
11
14 15 16
Anchoring Mount ×1
2
Screw Nut ×4
5
M3 L6 Screw ×7
Backplate cap ×1
11 12
1413
W3 L4
Screw ×5
3
7
8
12
Metal Back Plate ×1
3
LGA2011 Type B Screw Pillars x4
6
Intel Washer (small) ×4
9
Thermal paste ×1
15
M3 L17 Screw ×5
The Ultimate Cooling Solutions!
www.thermalright.com
6
Installation Instructions:
Step 1:
Step 1 : Screw Pillar Installation
Screw on the four LGA2011 Type B Screw Pillars into the Heatsink studs on the ILM Assembly Frame
around the processor socket.
Step 2:
Step 2 : Anchoring Mount Installation
Place the Anchoring Mount onto the four LGA2011 Type B Screw Pillars, secure it by tightening it with 4
M3L6 Screws.
Step 3:
Step 3 : Applying Thermal Paste
Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly.
7
AXP-100
Step 4:
Step 4 : Mounting Plate Installation.
Place the Heatsink Body on top of the CPU. Make the Mounting Plate go through the Heatsink Body.
Then use the two M3L6 screws to secure the Mounting Plate.
Step 5:
Step 5 : Fan Installation
Place the included TY-100 onto the Heatsink Body. And then secure it by scewing on the four M3L17
Screws, though the fan’s mounting hole.
Step 6:
Step 6 : Installation completed
Plug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
The Ultimate Cooling Solutions!
www.thermalright.com
8
AXP-100
AM2/AM2+/AM3/AM3+/FM1/FM2
Exploded view
Important! Before proceeding with installation, please check for the most
up-to-date instructions at www.thermalright.com
Heatsink Body
M3 L6 Screw
Anchoring Mount
120mm Fan
Mounting Plate
Screw Nut
AMD Washer(big)
Metal Back Plate
M3 L10 Screw
Backplate cap
9
Component
1
4
9
13
Heatsink Body ×1
1
Mounting Plate ×1
4
M3 L10 Screw ×5
7 8
AMD Washer (big) ×4
10
TY100 Fan×1
16
M3 L30 Screw ×5
2
5
10
6
11
14 15 16
Anchoring Mount ×1
2
Screw Nut ×4
5
M3 L6 Screw ×7
Backplate cap ×1
11 12
1413
W3 L4
Screw ×5
3
7
8
12
Metal Back Plate ×1
3
LGA2011 Type B Screw Pillars x4
6
Intel Washer (small) ×4
9
Thermal paste ×1
15
M3 L17 Screw ×5
The Ultimate Cooling Solutions!
www.thermalright.com
10
Installation Instructions:
Step 1:
AMD
Step 1 : Backplate Installation
Choose the platform (AMD) you are in use. Make four M3L10 Screws go through the Metal Back Plate
from bottom towards top. And then place the Metal Back Plate on the table. Put the four Washers (for
AMD) around the Screw Cylinders.
Step 2: Step 3:
Step 2 : backplate cap
Note: When installing on a 939 platform, please
rst insert the Back Plate Cap into the opening on
the Back plate. Make sure you have the Cap facing
downwards. (Only for 939).
Step 4: Step 5:
Step 4 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts.
Use the four M3L6 Screws to x the Anchoring
Mount on to the Screw Nuts.
11
Step3 : Place the motherboard on top of the Back
Plate. See the four Screw Cylinders go through
the four holes around the processor socket.Cap
the four Screw Cylinders with the four Screw Nuts.
Make sure the side with a washer is facing the
Back Plate.
Step 5 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly.
Step 6:
Step 6 : Mounting Plate Installation.
Place the Heatsink Body on top of the CPU. Make the Mounting Plate go through the Heatsink Body.
Then use the two M3L6 screws to secure the Mounting Plate.
Step 7:
Step 7 : Fan Installation
Place the included TY-100 onto the Heatsink Body. And then secure it by scewing on the four M3L17
Screws, though the fan’s mounting hole.
Step 8:
Step 8 : Installation completed
Plug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
The Ultimate Cooling Solutions!
www.thermalright.com
12
AXP-100
Technical Spec
Heatsink Specifications:
Dimension: Length 105.47mm x Width 121.1mm x Height 44.15mm
Weight: 360g (including fan and mounting brackets)
Heatpipe: 6mm heatpipe*6 units
Copper Base: C1100 Pure copper nickel plated
Fan Specification:
Dimension: L108.25mm x H101.5mm x W25mm
Weight: 40g
Fan speed: 900~2500RPM (PWM controlled)
Fan noise: 22~30 dBA MAX (Test distance 1.0M)
Airflow: 16.05~44.57 CFM MAX
Connector: 4 Pin (PWM Fan connector)
13
AXP-100
121.1
105.47
44.15
27.15
19.15
42 22.3
30.35
9.45
15.98
The Ultimate Cooling Solutions!
40 26.98
www.thermalright.com
14
Upgrading Your Fan to TY-140 series fans
Step 1:
Step 1 : Place the 120/140mm Fan Mount on top of the Heatsink Body, pass four M3L4 Screws
through the rectangle holes. Slide the frame to adjust your fan mounting position, then tighten the
120/140mm Fan Mount.
Step 2: Step 3:
Step2: Secure the fan by screwing on the four
M3L30 Screws, though the fan’s mounting holes
15
Step 3: Installation Completed.
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard.
The Ultimate Cooling Solutions!
www.thermalright.com
TEL: +886-2-8663-6630
FAX: +886-2-8663-6645
EMAIL: sales@thermalright.com
Loading...