TECHNICAL
BULLETIN
Date: 07/07/2009
Product: PakMaster 150XL By: John Brasseur / Kent Swart
Subject: Discontinuation
Summary:
Valued Thermadyne Distributor,
As of September 2009, the Thermal Dynamics PakMaster 150XL will be discontinued. There are
two possible replacements for these machines: The CutMaster Series for single gas applications that
require 120 Amps of output and the PAK 200 for applications that require dual gas capabilities.
1 of 2
Thermal Dynamics will continue to support the PakMaster 150XL through service and parts, even though
the PakMaster 150XL units will no longer be available. Please see chart in the next page for direct
replacement part numbers.
Please do not hesitate to contact us if you have any questions.
For More information Contact:
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0012
West Lebanon, NH 03784
“Exceeding Customer Expectations Through Performance Excellence"
82 Benning Street
1-603-298-5711
Fax: 1-800-221-4401
TECHNICAL
BULLETIN
Date: 07/07/2009
Product: PakMaster 150XL By: John Brasseur / Kent Swart
Subject: Discontinuation
Summary:
Pak Master 150XL Single Gas Replacement units Dual Gas Replacement units
P/N Description P/N Description P/N Description
1-1570-2 PM150XL, PCH120, 70 ° 25ft 1-1730-2 CutMaster 152 20ft 460/230V 1-1533 PAK200 25' 70° 460/230V
1-1570-3 PM150XL, PCH120, 70 ° 25ft 1-1930-3 CutMaster 40mm 6.1m 400V 1-1539 PAK200 25' 70° 400V
1-1571-2 PM150XL, PCH120, 70 ° 50ft 1-1731-2 CutMaster 152 50ft 460/230V 1-1534 PAK200 50' 70° 460/230V
1-1571-3 PM150XL, PCH120, 70 ° 50ft 1-1931-3 CutMaster 40mm 15m 400V 1-1540 PAK200 50' 70° 400V
1-1580-2 PM150XL, PCM120 25ft 1-1734-2 CutMaster A120 25ft 460/230V 1-1537 PAK200 25' 180° 460/230V
1-1580-3 PM150XL, PCM120 25ft, W/HP 1-1734-3 CutMaster A120 6.1m 400V 1-1547 PAK200 25' 180° 400V
1-1581-2 PM150XL, PCM120 50ft 1-1735-2 CutMaster A120 50ft 460/230V 1-1538 PAK200 50' 180° 460/230V
1-1581-3 PM150XL, PCM120 50ft, W/HP 1-1735-3 CutMaster A120 15m 400V 1-1548 PAK200 50' 180° 400V
1-1582-2 PM150XL,
1-1583-2 PM150XL,
1-1590-2 PM150XL, PCH120, 90 ° 25ft 1-1730-2 CutMaster 152 20ft 460/230V 1-1535 PAK200 25' 90° 460/230V
1-1590-3 PM150XL, PCH120, 90 ° 25ft 1-1930-3 CutMaster 40mm 6.1m 400V 1-1539 PAK200 25' 70° 400V
1-1591-2 PM150XL, PCH120, 90 ° 50ft 1-1731-2 CutMaster 152 50ft 460/230V 1-1536 PAK200 50' 90° 460/230V
1-1591-3 PM150XL, PCH120, 90 ° 50ft 1-1931-3 CutMaster 40mm 15m 400V 1-1540 PAK200 50' 70° 400V
FILTR
FILTR
,PCM120
,PCM120
25ft 1-1734-2 CutMaster A120 25ft 460/230V 1-1537 PAK200 25' 180° 460/230V
SHLD
50ft 1-1735-2 CutMaster A120 50ft 460/230V 1-1538 PAK200 50' 180° 460/230V
SHLD
2 of 2
For More information Contact:
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0012
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Loading...