THERMAL DYNAMICS Drag-Gun Plus Troubleshooting instruction

TECHNICAL

BULLETIN

Date: 1/31/2008
Product: Drag-Gun Plus By: Kent Swart
Subject: Excessive Condensation of water
Summary: Replacement La-Man two stage filter

Valued Thermadyne Customer,
In order to improve the excessive condensation of water that we have seen on the DRAG-GUN PLUS systems the

filter on the back has been changed to a Dual Stage La-Man filter (part # 9-0397)
A similar filter has been successfully used on the PakMaster and CutMaster lines for several years. This filter contains

replicable elements, 9-1021 first stage and 9-1022 second stage. This will allow elements to be replaced, which will
remove a higher percentage o f h umidity from t he air.

Note: Even though this is a better solution it is not a 100% in high humidity environments, this filter element
will saturate causing one of two things to happen: First off the water will pass through the filter; secondly air will be
restricted from getting to the torch. If excessive water passes through your filter you will know that is time to replace the
elements.

Please do not hesitate to contact us if you have any questions.

System: Drag-Gun Plus
Part #: 1-3835-1F

“ New La-Man Filter comes standard
with the unit ”

For More information Contact:

THERMAL DYNAMICS TECHNICAL SUPPORT

Phone: [phone]
Fax: [phone]
[e-mail]

www.thermadyne.com

Form 0003

West Lebanon, NH 03784

“Exceeding Customer Expectations Through Performance Excellence"

82 Benning Street

1-603-298-5711

Fax: [phone]