TECHNICAL
BULLETIN
Date: 06-11-07
Product: Hefty II By: Jorge Santana
Subject: Clicking Contactor
Summary: Defective MIG Gun
Valued Thermadyne Customer,
It has come to our attention that in some cases the Contactor inside the Hefty II Feeder will only
“click-click” repetitively when the trigger gun is pressed.
The problem occurs when the MIG gun has one or both of the gun switch wires shorted to the Positive
weld circuit due to overheating from exceeding the current rating of the gun or other type of abuse.
This situation has been duplicated in our Engineering Lab by connecting the trigger wires to the
Positive fitting of the MIG gun.
In the event that you experience this problem we suggest to bring the MIG gun to an authorized
repair facility to be checked out.
For More information Contact:
THERMAL ARC TECHNICAL SUPPORT
Phone: 1-800-462-2782
Fax: 1-603-298-7402
taitech@thermadyne.com
www.thermadyne.com
Form 0002
Cut or damaged switch wires may get in contact with the
Positive terminal of the MIG Gun “Shorted MIG Gun”
making the Hefty II contactor to rapidly turn ON & OFF
making a loud “clicking” sound. In most cases this Shorted
Condition is not obvious in a visual inspection, please
bring your MIG Gun to an authorized repair facility
for full inspection.
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Loading...