PRD486WDHU
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
RANGETOP
1 3 6
2 4 7
Total number of cooktop Burners 6 + Griddle
1 – Power of Back Left Burner BTU 15,000 and XLO
2 – Power of Front Left Burner BTU 18,000 and XLO
3 – Power of Back Center Burner BTU 15,000
4 – Power of Front Center Burner BTU 18,000
5 – Power of Center 12" Electric Griddle 1,630 W (6-Pass)
FEATURES & BENEFITS
- The Star® Burner delivers superior ame spread for more
even heating
- ExtraLow®, the widest simmer temperature control as low as
100°F
- Superfast 2.5-hour self-clean mode-fastest in the industry
- Non-stick griddle with even heating across the entire surface
- Powerful third element convection for cooking on multiple
levels
TECHNICAL DETAILS
Circuit Breaker 50 A
Volts 240 / 208 V, 60Hz
Energy Source Gas and Electric
Plug Type USA No Plug
Power Cord Length Purchase Separately
Gas Supply
WARRANTY
Limited Warranty, Entire Appliance,
Parts and Labor
SEE PAGE 2 FOR INCLUDED AND OPTIONAL ACCESSORIES
4 Wire
3
/4"
2 Year
6 – Power of Back Right Burner BTU 15,000
7 – Power of Front Right Burner BTU 18,000
OVEN
Oven Capacity Lg. / Sm. 4.4 / 2.4 cu. ft.
Cooking Modes, Lg. Oven
Bake, Convection Bake, True Convection, Convection Roast, Roast,
Convection Broil, Broil
Cooking Modes, Sm. Oven
Bake, Keep Warm, Broil, Proof
Sabbath Lg. / Sm. Yes / Yes
Self-Clean Lg. / Sm. Yes / Yes
Telescopic Rack(s) Lg. / Sm. 3 / 1
Interior Lights Lg. / Sm. 2 / 1
Bake Power Lg. / Sm. 2,000 W / 1,400
Broil Power Lg. / Sm. 4,000 W / 2,600
Convection Power 2,750 W Lg. Oven Only
Home Connect™ (Wi-Fi Enabled) Yes, Large Oven Only
Lg. Cavity Interior Dimensions (HxWxD) 16 1/4" x 25" x 18 5/8"
Lg. Cavity Usable Dimensions (HxWxD) 12" x 22 3/8" x 16 5/8"
Sm. Cavity Interior Dimensions (HxWxD) 16 3/8" x 13 1/4" x 19"
Sm. Cavity Usable Dimensions (HxWxD) 12" x 10 7/8" x 16"
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (HxWxD) 35 3/4"–36 3/4" x 47 15/16"
Required Cutout Size (HxWxD) 35 3/4"–36 3/4" x 48" x
Net Weight 458 lbs.
5
x 24 5/8"
24"
THERMADOR® EXCLUSIVE
Page 1 of 6
11 / 18
PRD486WDHU
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
ACCESSORIES (INCLUDED)
3 Telescopic Racks, 1 Sm. Telescopic Rack, Meat Probe, 1 Griddle Plate. 1 Grease Tray, 1 Lg. Broil Pan, 1 Sm. Broil Pan, Island Trim
ACCESSORIES (OPTIONAL)
COMING
SOON
PWOKRINGHC
Wok Ring
PAGRIDDLE
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
PAGRIDLFW
12" Pro Griddle with Tray, (Fusion Coating Option
for Griddle Models)
PA12LCVRW
12" Professional Griddle Cover
PAKNOBLUWH
Metallic Blue Knob Kit
PAALTKITGW
Natural Gas Models from 5,400 ft.–10,200 ft.
COMING
SOON
PA12CHPBLK
Chopping Block / Cutting Board
PA12GRILLW
12" Pro Grill Plate with Tray, (for Griddle Models),
Non-Fusion Coating
PA12GRILFW
12" Grill Plate with Tray (for Griddle Models),
Fusion Coating
PA48WLBH
Pro Harmony 7" Low Back Backguard*
PALPKITHW
LP Conversion Kit Dual-Fuel Pro Ranges and Rangetops
(4 & 6 Burner)
Contact Customer Support
Propane Gas or Dual-Fuel Models Connected to LP Gas
from 10,000 ft.–10,200 ft.
* Models PCG305xx, PRD305xx, and PRD606x x are suitabl e for 0" rear clear ance to c ombustible sur face s. All ot her models: when usi ng the in cluded Island Trim a minimum 6" (152 mm) rear
clear ance is required to a combustible surface. When installin g again st a com bust ible surface, a The rmador® Low Backguard is required for a 0" rear clearanc e to the co mbus tible surf ace. A
Thermador L ow Backg uard mu st be pu rchased sep arately. A rear clearance to a surface cover ed in a non combustible material (metal, ce ramic tile, brick, marble, o r stone) is 0" when using the
inclu ded Island Trim. Clearances of l ess than 6" (152 mm) should be approved by the local code s and/or by the loc al aut hority having jurisdic tion. Clear ances from no n-combus tibl e materials are
not par t of the A NSI Z21.1 scope and are not cer tified by CSA .
Page 2 of 6
11 / 18
PRD486WDHU
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
48-INCH RANGE DIMENSIONS
48-INCH RANGE CUTOUT DIMENSIONS
Page 3 of 6
11 / 18
PRD486WDHU
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
48-INCH RANGE CUTOUT DIMENSIONS
as dened in the “National Fuel Gas Code” (ANSI Z223.1,
Current Edition). Clearances from non-combustible materials
are not part of the ANSI Z21.1 scope and are not certied by
CSA. Clearances of less than 12” (305 mm) must be approved
by the local codes and/or by the local authority having
jurisdiction.
Page 4 of 6
11 / 18
PRD486WDHU
Installation Clearances with Low Backguard
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
48-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4 inch of a
ame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
36" (914 mm) min.
to combustible
materials
35 7/8" (911 mm) Min.
36 ¾" (933 mm) Max.
Combustible
Materials
28" (711 mm)
27¼" (692 mm)
9" (229 mm)
Low Back
7" (178 mm)
245/8" (625 mm)
24" (610 mm)
max. recess depth
Combustible
Back Wall
24¾" (629 mm)
22 5/8" (575 mm)
447/8"
(1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Page 5 of 6
11 / 18
PRD486WDHU
Installation Clearances with Flush Island Trim
48-INCH DUAL-FUEL PRO HARMONY® RANGE WITH
GRIDDLE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
48-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “FLUSH ISLAND TRIM”
Combustible
Materials
Shaded area behind
Shaded area behind
range indicates
range indicates
minimum clearance
minimum clearance
to combustible surfaces,
to combustible surfaces,
combustible materials
combustible materials
cannot be located within
cannot be located within
this area.
36" (914 mm) min .
to combustible
materials
28" (711 mm)
27¼" (692 mm)
245/8" (625 mm)
6" (152 mm) min. to
combustible surface
with Flush Island Trim
Cantilever
this area.
For Flush IslandFor Flush Island
Trim installations,
Trim installations,
counter surface should
counter surface should
have a cantilever edge
have a cantilever edge
meeting the back
meeting the back
section of the Flush
section of the Flush
Island Trim accessory.
Island Trim accessory.
35 7/8" (911 mm) Min.
36 ¾" (933 mm) Max.
24" (610 mm)
max. recess depth
24¾" (629 mm)
If an inner wall
is used under
the cantilever counter
top, there should be a
1
/8" (3 mm) gap from
the rear of the range
to the inner wall.
22 5/8" (575 mm)
"
(1140 mm)
447/
8
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
These warr antie s give yo u spec ific le gal rig hts and you may have othe r rights that vary f rom st ate to state. Full warr anty and limi ted warrant y from date of in stallation. For com plete w arranty
details, refer to your U se & Care manual, or ask your deal er.
Specifications are for planning purposes only. Refer to installation instruc tion s and consult your cou nter top supplier prior to making counter open ing. Co nsult with a heating and ventilatio n
engineer for your specifi c ventilation r equir ements. For t he mos t detailed information, refer to installation instr uctions ac companying p roduct or write to Therma dor indicat ing the m odel
number. Speci fications a re correct at time of printing. The rmador rese rve s the rig ht to change produc t spec ific ation s or des ign without n otice. Some models are cer tifie d for use in Canada.
Thermador i s not res ponsible for produ cts that are transpor ted from the U.S. f or use in Canad a.
1 800 735 4328 | USA THERMADOR.CO M | CANA DA THERMADOR.CA | ©2018 BSH HOME APPLIA NCES CORPORATION. ALL RIGHTS RESERVED.
Page 6 of 6
11 / 18
Loading...