Thermador T18IW900SP Maintance Manual
USE & CARE GUIDE
Model/Modele/Modelo
T18IW900SP
GUIDE
D’UTILISATION
ET D’ENTRETIEN
MANUAL DE USO
Y CUIDADO
T24IW900SP
Wine storage unit
en-us
enTable of Contents
en I nst ruc t i on manual
( Important safety instructions . . . . . . . . . . . . 3
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
About these instructions . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Risk of explosion. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Risk of electric shock . . . . . . . . . . . . . . . . . . . . . . . 3
Avoiding placing children and
vulnerable people at risk . . . . . . . . . . . . . . . . . . . . . 4
Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
State of California Proposition 65 Warnings . . . . . . 4
Self-test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the brightness of the control panel . . . . . . 11
Switching standby display on and off . . . . . . . . . . 11
Switching key press sound on or off . . . . . . . . . . 11
Setting the key volume . . . . . . . . . . . . . . . . . . . . . 12
Setting the signal tone volume . . . . . . . . . . . . . . . 12
Automatic clean lock . . . . . . . . . . . . . . . . . . . . . . 12
Automatic door opening . . . . . . . . . . . . . . . . . . . . 12
Theater mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Resetting to the factory settings . . . . . . . . . . . . . . 13
Switching demo mode on or off . . . . . . . . . . . . . . 13
Sabbath mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . . . . . . . . . . . 5
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Old appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 Installation and connection . . . . . . . . . . . . . . 5
Contents of package. . . . . . . . . . . . . . . . . . . . . . . . 5
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . 5
Check built-in cut-out. . . . . . . . . . . . . . . . . . . . . . . . 5
Side-by-side installation . . . . . . . . . . . . . . . . . . . . . . 5
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Before using for the first time . . . . . . . . . . . . . . . . . 7
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . 7
* Getting to know your appliance . . . . . . . . . . 8
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating controls. . . . . . . . . . . . . . . . . . . . . . . . . . 8
Interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1 Operating the appliance . . . . . . . . . . . . . . . . 10
Switching the appliance on . . . . . . . . . . . . . . . . . .10
Switching off and disconnecting the appliance . . . 10
Setting the language . . . . . . . . . . . . . . . . . . . . . . .10
Setting the temperature unit . . . . . . . . . . . . . . . . .10
Setting the temperature. . . . . . . . . . . . . . . . . . . . . 10
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Display light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Clean lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
M Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Door alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
N Wine storage cabinet. . . . . . . . . . . . . . . . . . 14
Loading bottles. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tips for storing wine . . . . . . . . . . . . . . . . . . . . . . . 14
Drinking temperatures . . . . . . . . . . . . . . . . . . . . . 14
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the display . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the appliance interior. . . . . . . . . . . . . . . 15
Cleaning the fittings . . . . . . . . . . . . . . . . . . . . . . . 15
Care instructions for stainless steel surfaces . . . . 15
> Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Normal noises . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Preventing noises . . . . . . . . . . . . . . . . . . . . . . . . . 15
9 Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3 Faults – what to do? . . . . . . . . . . . . . . . . . . 16
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4 Customer service. . . . . . . . . . . . . . . . . . . . . 17
Appliance self-test . . . . . . . . . . . . . . . . . . . . . . . . 17
Repair order and advice on faults . . . . . . . . . . . . 17
2
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
(Important safety instructions
Import ant safet y i nstr ucti ons
READ INSTRUCTIONS - DO NOT DISCARD!
Important safety instructions en-us
Definitions
9 WARNING
Non-observance of this warning could
result in death or serious injuries.
9 CAUTION!
Non-observance of this warning could
result in slight or moderately serious
injuries.
NOTICE: Non-observance of this
information could damage the appliance.
Note: This indicates important information and/or tips.
About these instructions
■ Read and follow the operating and
installation instructions. They contain
important information on how to install,
use and maintain the appliance.
■ The manufacturer is not liable if you
disregard the instructions and warnings
in the operating and installation
instructions.
■ Retain all documents for subsequent use
or for the next owner.
Introduction
■ This appliance complies with the relevant
safety regulations for electrical
appliances.
■ The refrigeration circuit has been
checked for leaks.
Risk of explosion
■ Never use electric devices inside the
appliance (e.g. heaters or electric ice
makers).
■ Do not store products which contain
flammable propellants (e.g. spray cans)
or explosive substances in the appliance.
Risk of electric shock
Improper installations and repairs may put
the user at considerable risk.
■ If the power cord is damaged:
Immediately disconnect appliance from
the power supply.
■ Do not use multiple outlets, extension
leads or adapters.
■ Before servicing or modifying the
appliance, pull out the power plug or
switch off the circuit breaker.
Before cleaning, switch off the appliance
with the main On/Off switch.
Fittings can be safely adjusted while the
appliance is switched on.
■ Never cut through or remove the third
(ground) conductor of the power cord.
■ Never clean the appliance with a steam
cleaner. The steam may penetrate
electrical parts and cause a short circuit.
■ Have the appliance, cable and
accessories repaired or replaced by the
manufacturer, Customer Service or a
similarly qualified person only.
■ Use original parts supplied by the
manufacturer only.
The manufacturer guarantees that these
parts satisfy the safety requirements.
3
en-us Important safety instructions
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
Avoiding placing children and vulnerable people at risk
At risk are:
■ Children,
■ People who have limited physical, mental
or sensory abilities,
■ People who have inadequate knowledge
concerning safe operation of the
appliance.
Measures:
■ Never allow children to play with the
appliance.
■ Ensure that children and vulnerable
people have understood the hazards.
■ Supervise children who are cleaning and
maintaining the appliance.
Risk of suffocation
■ If the appliance features a door lock:
keep the key out of the reach of children.
■ Keep children away from the packaging
and its parts.
Weight
The appliance is very heavy. The appliance
should always be transported and set up by
at least 2 people.
~ "Installation and connection" on page 5
State of California Proposition 65 Warnings
This product can expose you to chemicals
including vinyl chloride, which is known to
the State of California to cause cancer and
birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Damage
To prevent damage:
■ Do not stand or support yourself on the
base, runners or doors.
■ Keep plastic parts and door seals free of
oil and grease.
■ Pull the power cord plug – not the power
cord.
4
Intended use en-us
8Intended use
Intended use
Use this appliance
■ only for storing wine.
■ only in the home and in the home environment.
■ only according to these operating instructions.
This appliance is intended for use at an elevation of
no more than 2000 meters above sea level.
7Environmental protection
Env i r on ment al prot ec t i on
Packaging
All materials are environmentally safe and
recyclable:
■ Dispose of packaging in an environmentally
responsible manner.
■ Please ask your dealer or inquire at your local
authority about current means of disposal.
Old appliances
Valuable raw materials can be reclaimed by
recycling old appliances.
5 Installation and
connection
Install ation and connecti on
Contents of package
After unpacking all parts, check for any damage
during transport.
If you have any complaints, please contact the
dealer from whom you purchased the appliance or
our customer service.
~ "Customer service" on page 17
The delivery consists of the following parts:
■ Built-in appliance
■ Interior fittings (depending on model)
■ Installation material
■ Instruction manual
■ Installation instructions
■ Customer service booklet
■ Guarantee enclosure
■ Information on the energy consumption and
noises
Technical data
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 8
9 WARNING
CHILDREN MAY BECOME LOCKED IN THE APPLIANCE AND SUFFOCATE!
Before disposing of your old appliance:
■ Remove the door.
■ Leave shelves and containers in the
appliance to prevent children from climbing
in.
■ Keep children away from the discarded
appliance.
9 CAUTION!
REFRIGERANT AND HARMFUL GASES MAY ESCAPE.
Do not damage the tubes of the refrigeration
circuit and insulation.
1. Pull out the power cord plug.
2. Cut through the power cord.
3. Have the appliance disposed of properly.
Installing the appliance
Installation location
The weight of the appliance may be up to 460 kg
depending on the model. The base must be
sufficiently stable and should not give. If necessary,
reinforce the bottom.
Check built-in cut-out
The cut-out must fulfill these criteria:
■ Anti-tilt bracket must be fitted
■ Cut-out depth min. 24” (610 mm), for flush
installation 25” (635 mm)
■ rectangular
■ stable – the side panels and the top must be min.
5/8" (16 mm) thick and securely attached to the
floor or wall
■ Depth of shortest side panels min. 4” (100 mm)
Side-by-side installation
Observe the specifications in the installation
instructions for a side-by-side installation.
If a partition wall is required between the appliances
it must be at least 5/8" (16 mm) wide.
5
en-us Installation and connection
Saving energy
If you follow the instructions below, your appliance will use less power.
Note:
The arrangement of the fittings does not affect the energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight. The appliance needs to cool less frequently at low ambient temperaInstall the appliance as far away as possible from heating elements,
cooker and other heat sources:
At least 1¼” (3 cm) from electric or gas cookers.
At least 11¾" (30 cm) from oil or solid-fuel cookers.
NOTICE: If this is not possible, attach an insulating plate between the
appliance and heat source.
Select an installation location at a room temperature of approx. 68 °F
(20 °C).
Do not cover or block the ventilation openings. The appliance needs to cool less frequently if the warm air can
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly. The air in the appliance does not warm up so intensely. The appliance
Transport cooled wine in a cool bag and place in the appliance
quickly.
Always leave a space between the bottles and the back panel. The air can circulate, and the temperature will remain constant. The
Do not cover or block the ventilation openings. The appliance consumes less power if the warm air can escape freely.
Vacuum the ventilation openings once a year.
tures and therefore consumes less power.
escape and therefore consumes less power.
needs to cool less frequently and therefore consumes less power.
appliance needs to cool less frequently and therefore consumes less
power.
--------
6
Installation and connection en-us
Before using for the first time
1. Remove information material, adhesive tape and
protective foil.
2. Clean the appliance.
~ "Cleaning" on page 15
Electrical connection
9 CAUTION!
Do not connect the appliance to electronic
energy saver plugs.
Note: You can connect the appliance to mainscontrolled and sine-controlled inverters.
Mains-controlled inverters are used for photovoltaic
systems which are connected directly to the national
grid. Sine-controlled inverters must be used for
isolated applications. Isolated applications, e.g. on
ships or in mountain lodges, are not directly
connected to the national grid.
1. After installing the appliance, wait at least 1 hour
before connecting it to prevent damaging the
compressor.
2. Connect the appliance via a correctly installed
outlet.
Requirements for outlets
Outlet with 110 V ... 120 V
Protective
conductor
Fuse 10 A ... 16 A
Maximum simultaneous load
Appliance 6 A
3. Connect the appliance to an outlet near the
appliance.
The outlet must also be freely accessible
following installation of the appliance.
60 Hz
9 WARNING
RISK OF ELECTRIC SHOCK!
If the length of the power cord is inadequate,
never use multiple outlets or extension
leads.Instead, please contact Customer
Service for alternatives.
9 WARNING
RISK OF ELECTRIC SHOCK!
Never use multiple outlets, extension leads
or adapters.
The appliance must be correctly grounded.
Never cut through or remove the third
(ground) conductor of the power cord.
7
en-us Getting to know your appliance
+
*Getting to know your
appliance
Gett i ng to know your appli ance
H(
P
X
`
h
)"
)*
)2
Operating controls
/LJKW
O
(GLW
( Touch fields
There are sensors under the touch
fields. Touching the symbol calls up
the respective function.
0 n button
Changes between the different
lighting scenarios.
8 Wine storage cabinet temperature
display
Indicates the set temperature in °F/
°C.Depending on the appliance
model in question, 2 or 3 cabinets
are displayed.
@ " button
Opens the Settings menu.
~ "Settings menu" on page 8
H : button
Opens the menu for changing the
temperature.
6HWWLQJV
#
Appliance
* Not all models.
( ... H Operating controls
P Main On/Off switch
X* Display shelf
` Shelf
h Partition
)" Rating plate
)* Automatic door opening
)2 Ventilation opening
Settings menu
Press the " button to open the menu.
In the Settings menu, you will find:
■ Appliance settings
■ Cleaning mode
■ Self-test
■ Sabbath mode (if activated)
~ "Operating the appliance" on page 10
8
Getting to know your appliance en-us
Appliance settings menu
This is how to navigate to the Appliance settings
menu:
1. Press the " button.
2. Scroll to the left to the Appliance settings menu.
3. Open the menu using the 8 button.
In the Appliance settings menu, you will find the
following sub-menus and setting options:
■ Brightness
■ Standby screen
■ Key press sound
■ Key volume
■ Signal tone volume
■ Automatic clean lock
■ Automatic door opening
■ Theater mode
■ Temperature unit
■ Language
■ Factory settings
■ Demo mode
■ Sabbath mode
~ "Operating the appliance" on page 10
Interior fittings
Display shelf
Use the display shelf to display wine bottles
effectively.
You can remove or adjust the shelf:
(not all models)
Shelf
You can pull out the shelves to reach wine bottles
more easily:
■ Pull out a shelf.
Note: The shelves separating the climate zones are not movable.
9
en-us Operating the appliance
1Operating the appliance
Operat i ng the appl i anc e
Switching the appliance on
1. Press the main On/Off switch.
The appliance starts cooling and the light is
switched on when the door is open.
2. Set the required temperature.
~ "Setting the temperature" on page 10
Operating tips
■ When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached.
■ The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the appliance
Switching off the appliance
■ Press the main On/Off switch.
The appliance is no longer cooling.
Disconnecting the appliance
If you do not use the appliance for a prolonged
period:
1. Pull out mains plug or switch off fuse.
The appliance is no longer cooling.
2. Clean the appliance.
3. Leave appliance open.
Setting the temperature unit
You can choose between the unit °C and °F.
1° <=> 1 °F
1 °C <=> 1 °C
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Use < button to move to the menu item
Temperature unit.
5. Press : button.
6. Use < > buttons to move to the required unit.
7. Press 8 button.
The unit will be changed.
8. Press ; button to exit the menu.
Setting the temperature
Recommended temperature
Wine storage cabinet: 11 °C/52 °F
Wine storage cabinet
1. To open the menu for setting the temperature,
press the : button.
2. Use the m/¢ button to select the desired
compartment.
3. Keep pressing the +/- button until the display
indicates the required temperature.
4. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Setting the language
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press < button to move to the menu item
Language.
5. Press : button.
6. Use < > buttons to move to the required
language.
7. Press 8 button.
The display restarts, and the start screen is
displayed.
Humidity
If bottles with natural corks are stored for longer than
4 weeks, the natural corks may shrink if the humidity
is too low.
To prevent this from happening, store old wine
bottles in such a way that the cork is kept wet and
increase the humidity.
Switching humidity on and off:
1. Press : button to open the menu for setting the
climate zones.
2. Use m/¢ button to select the desired
compartment.
3. To switch on the higher humidity level, press
^ button.
The ^ symbol appears in the display.
To switch off, press [ button.
The [ symbol appears in the display.
4. Confirm the selection by pressing 8 button. If the
button is not pressed, the appliance saves the
setting and automatically returns to the main
screen after a few seconds.
10
Operating the appliance en-us
Display light
You can use the preprogrammed light modes to
illuminate your wine bottles when the door is closed.
The individual climatic zones have different
illumination levels.
Using the display light
1. Press the n button to open the Display light
menu.
2. Select a light mode or press the o button to
switch the display light off.
3. Press 8 button.
The setting is saved.
Clean lock
You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 15
1. Press : button to open the Settings menu.
2. Press < button.
The cleaning display appears, and the countdown
starts.
Setting the brightness of the control panel
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press : button to open the menu item
Brightness.
5. Use < > buttons to set the required brightness.
6. Press 8 button.
The setting is saved.
7. Press ; button to exit the menu.
Switching standby display on and off
If you switch on the standby screen, you can select
what is displayed on the control panel when the door
is closed.
1. Press the : button to open the main menu.
2. Use the < button to move to the menu item Basic
settings.
3. Press 8 button.
4. Use the > button to scroll to the Standby
screenmenu item.
5. Press : button.
6. Use buttons < > to select whether the Standby
screen is switched on or off.
7. Press 8 button.
8. When the Standby screen has been switched on,
you can use the buttons < > to select whether the
logo or the temperature is displayed with the
functions switched on.
9. Press 8 button.
The setting is saved.
10. Press ; button to exit the menu.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press > button to move to the menu item
Automatic clean lock.
5. To change the setting, press : button.
Self-test
This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 17
Switching key press sound on or off
You can switch the sounds generated when pressing
keys off and back on again.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item Key
press sound.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
11
en-us Operating the appliance
Setting the key volume
You can adjust the volume level of the sounds
generated when pressing keys.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item Key
volume.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Use > button to move to the menu item Signal
tone volume.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press > button to move to the menu item
Automatic clean lock.
5. To change the setting, press : button.
Automatic door opening
9 CAUTION!
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
The automatic door opening function supports you in
opening the door. As soon as you activate this
function, automatic door opening moves out and
supports you in opening the door.
Open the menu item Aut. door opening:
1. Press " button.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Use > button to move to the menu item Aut. door
opening.
5. To change the setting, press : button.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
1. Open menu item Aut. door opening.
2. Select menu item Push-to-open system.
3. Press 8 button to open the menu item.
4. Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
5. Select menu item Opening duration. Here you
can select how long the door should remain open
a crack before it closes again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door
is still ajar. After the selected opening time elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
1. Open menu item Aut. door opening.
2. Select menu item Pull-to-open system.
3. Press 8 button to open the menu item.
4. Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
12
Switching off automatic door opening
1. Open menu item Aut. door opening.
2. Select menu item Off.
3. Press 8 button.
The setting is saved.
Alarm en-us
Theater mode
If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Use > button to move to the menu item Theater
mode.
5. Press : button to open the menu item.
6. Use > button to move to the menu item On or Off.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Resetting to the factory settings
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Use < button to move to the menu item Factory
settings.
5. Press : button.
A signal tone sounds, and a message to confirm
reset appears.
6. Press 8 button.
All settings are reset to the factory settings.
7. Press ; button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off.
All other functions can be used.
Note: Do not store any food items in demo mode as the appliance remains at room temperature.
Sabbath mode
The appliance switches off the following:
■ Automatic door opening
■ Audible signals
■ Interior light
■ Messages on the control panel
■ Background illumination of control panel is
reduced
Switching Sabbath mode on or off
Displaying Sabbath mode in the Settings menu
To use Sabbath mode, you first have to display the
function in the Settings menu:
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press < button to move to the menu item
Sabbath mode. Press : button.
5. Press < button to move to the menu item
Available. Confirm by pressing 8 button.
The function is added to the Settings menu.
Switching on Sabbath mode
1. Press : button to open the Settings menu.
2. Press › button to open the view Duration
Sabbath mode.
3. Select one of the presettings or change the
duration with the +/- buttons.
4. Press < button to start.
The appliance switches all listed functions off.
Switching Sabbath mode off
■ After the selected time elapses, the appliance
switches over to normal operation.
■ To end Sabbath mode before expiry of the
selected time, press = button.
1. Press : button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Use < button to move to the menu item Demo
mode.
5. Press : button.
6. Use <> buttons to select the setting On or Off
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
MAlarm
Al ar m
Door alarm
If the appliance door is open for a long time, the
door alarm (continuous audible signal) switches on.
■ Close door.
The audible warning signal is switched off.
13
en-us Wine storage cabinet
NWine storage cabinet
Wine st orage cabi net
Loading bottles
To store the maximum number of wine bottles:
■ store the bottles as indicated
■ check that the bottles do not exceed the
specified dimensions
Storage example
ç¼ȭȬ
PP
ê
PP
IOR]
O
é
PP
æȤ¼ȭȬ
PP
Tips for storing wine
■ Unpack wine bottles – do not store in crates or
cartons in the wine storage compartment.
■ If bottles with natural corks are stored for longer
than 4 weeks, the natural corks may shrink if the
humidity is too low.
To prevent this from happening, store old wine
bottles in such a way that the cork is kept wet
and increase the humidity.
~ "Humidity" on page 10
■ The open bottle shelves allow continuous air
circulation. As a result, excess humidity is quickly
removed.
■ Before the wine is enjoyed, it should be slowly
warmed up (chambré): take e.g. rosé wine out of
the appliance approx. 2–5 hours before drinking,
and red wine 4–5 hours before drinking. This will
ensure that the wine is at the correct drinking
temperature. White wine, on the other hand,
should be placed on the table just before
drinking. Sparkling wine and champagne should
be chilled in the refrigerator for a short while
before drinking.
■ Remember that wine should always be cooled
slightly lower than the ideal serving temperature,
as its temperature increases as soon as it is
poured into a glass.
PP
Drinking temperatures
The correct serving temperature is crucial for the
taste and therefore your enjoyment of the wine.
We recommend the following drinking temperatures
for serving the wine:
Type of wine Drinking temperature
Full-bodied red Bordeaux 65 °F (18 °C)
Côtes du Rhône red, Barolo 64 °F (17 °C)
Full-bodied red Burgundy, red Bordeaux 61 °F (16 °C)
Port 59 °F (15 °C)
Young red Burgundy 57 °F (14 °C)
Young red wines 54 °F (12 °C)
Young Beaujolais, all white wines with
little residual sugar
Old white wines, full-bodied Chardonnay 50 °F (10 °C)
Sherry 49 °F (9 °C)
Young white wines, from late vintage
onward
White wines, Loire, Entre-deux-Mers 45 °F (7 °C)
52 °F (11 °C)
46 °F (8 °C)
14
Cleaning en-us
DCleaning
Cleani ng
9 CAUTION!
AVOID DAMAGING THE APPLIANCE AND THE FITTINGS.
■ Do not use abrasive, chloride or acidic
cleaning agents or solvents.
■ Do not use scouring or abrasive sponges.
The metallic surfaces may corrode.
■ Never clean the shelves or containers in the
dishwasher.
The parts may become deformed.
Cleaning the display
The change in temperature and humidity can cause
the controls to steam up.
Switch the clean lock on before cleaning.
~ "Clean lock" on page 11
Use a clean micro-fiber cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1. Press main On/Off switch.
2. Take out bottles and store in a cool location if
possible.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH-neutral washing-up liquid.
9 CAUTION!
The rinsing water must not run into the light
or through the drainage hole into the
evaporation area.
>Noises
Noi s e s
Normal noises
Droning: A motor is running, e.g. refrigerating unit,
ventilator.
Bubbling, buzzing or gurgling: Refrigerant is
flowing through the tubes.
Clicking: Motor, switches or solenoid valves are
switching on or off.
Preventing noises
Appliance is not level: Align appliance using a
water level. Adjust the height of the feet.If the feet
have already been moved right out, but the
appliance is still not level, place e.g. a thin wooden
plate underneath.
Containers, shelves or storage compartments
wobble or stick: Check the removable fittings and
re-insert if required.
Bottles or receptacles are touching each other:
Move bottles or receptacles away from each other.
9Lighting
Li ght i ng
Your appliance features a maintenance-free LED
light.
Only customer service or authorized technicians may
repair the light.
4. Wipe door seal with clear water and dry
thoroughly with a cloth.
5. Switch appliance back on and put in bottles.
Cleaning the fittings
To clean, take the variable parts out of the
appliance.
~ "Interior fittings" on page 9
Care instructions for stainless steel surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for
stainless steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless
steel surface in the direction of the structure.
15
en-us Faults – what to do?
3 Faults – what to do?
Faul t s – wha t to do?
Before you call customer service, use this table to check whether you can rectify the fault yourself.
Appliance
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance" on page 10
If the temperature is too warm, check temperature again after a couple of hours.
If the temperature is too cold, check temperature again on the following day.
Displays do not illuminate.
The mains plug has not been inserted properly. Connect the mains plug.
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
The refrigeration unit is switching on more frequently and for longer.
The appliance was opened frequently. Do not open the appliance unnecessarily.
The ventilation openings are covered up. Remove obstructions.
Appliance is not cooling, display and lighting are lit.
Demo mode is switched on. Switch demo mode off.
~ "Switching demo mode on or off" on page 13
--------
16
Loading...