Thermador T18ID905LP Specification Sheet

T18ID905LP
18-INCH BUILT-IN FREEZER COLUMN WITH ICE & WATER DISPENSER
FREEDOM® COLLECTION, PANEL-READY, LEFT-HAND DOOR SWING
GENERAL PROPERTIES
Home Connect™ (Wi-Fi Enabled) Yes
Panel Ready Yes
Reversible Door Swing No
SoftClose® Door Yes
SoftClose® Drawers Ye s
Lighting LED Sidewall and
Freezer Shelves 4
Adjustable Shelves 2
Shelf Material Glass w/Aluminum
Full Extension Drawers @ 115° Door Opening Angle
General Use Drawer 2
Door Bins 0
External LED Proximity Sensor Yes
Oversized Dispenser Opening Yes
Chilled Water, Crushed and Cubed Ice Yes
Rapid Water Replenishment System Yes
Ice Maker with Diamond Ice System Yes
Door Open Alarm Yes
Open Door Assist Yes
Special Modes Sabbath, Economy,
Also Available In: T18ID905RP – Right-Hand Door Swing
FEATURES & BENEFITS
- Full Stainless Steel Inner Liner
- Freedom® Hinge enables true ush design
- Auto Door Opening provides the opening of the door with just a slight push or pull
- Energy Efcient Diamond Ice made with twist tray technology
- Smooth Filtered Lighting for clear and easy viewing of all product
- SoftClose® Drawers for easy and controlled storage
- Sleek clean design for the perfect symmetry when paired with additional columns
- TFT control panel managing all your columns functions
TEMPERATURE RANGES
Freezer -11°F (-24°C) to 7°F
SuperFreeze
Energy Saving (Economy) Mode 3°F (-16°C)
®
(-14°C)
-22°F (-30°C) for approximately 52 hours
CAPACITY
Total Capacity (cu. ft.) 7.8 cu. ft.
PERFORMANCE
Dedicated Evaporator & Compressor System Yes
SuperFreeze
Defrost Process Frost-Free
TECHNICAL DETAILS
Watts (W) 350 W
Current (A) 15 A
Volts (V) 110-120 V
Frequency (Hz) 60 Hz
Power Cord Length (in.) 118
Plug Type 120V-3 Prong
DIMENSIONS & WEIGHT
Appliance Dimensions (H x W x D) (in.) 83 33/44"* x 17 33/44" x 24"
Required Cutout Size (H x W x D) (in.) 84" x 18" x 25"
Net / Gross Weight (lbs) 289 / 319 lbs
EFFICIENCY
ENERGY STAR® Certied Yes
Annual Energy Consumption 428 kWh
*Height adjus table + / -11/22" (+ / -13 mm)
®
Theater Lighting
Prole
Yes
Vacation
Yes
Page 1 of 3
3 / 21
min. 4"
(102 mm)
18" (457 mm)
(2134 mm-
2164 mm)
Stainless steel models contain a panel-ready base unit,
ready-to-install stainless steel door(s) with a right or left
door swing and handle(s).
A:
Area for installation of power connection.
B:
Area for running the water line. It is recommended that the
waterbox is placed adjacent to the installation cavity, so that it
can be accessed for service without uninstalling the appliance.
If this is not possible, place the recessed waterbox adjacent to
the water supply socket elevated at the heights as referenced
in areas A and B.
C:
Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus
the thickness of the door panel.
Furniture return
4" (102 mm)
84"-85
1/16
"
A
B
C
B
90°
115
* Depends on the thickness
of the furniture door.
3/4
" (19 mm) is relevant for the
stainless steel door. (special Accessory).
** Door handle must be added
to this dimension
°
91/4"**
(234 mm)
24"
(610 mm)
20
11
/
16
"
(525 mm)
18" (457 mm)
17
3
/
4
"
(451 mm)
1/8
"
(3 mm)
1/8
"
(3 mm)
3/
4" (19 mm)*
T18ID905LP
18-INCH BUILT-IN FREEZER COLUMN WITH ICE & WATER DISPENSER
FREEDOM® COLLECTION, PANEL-READY, LEFT-HAND DOOR SWING
WARRANTY
Limited, Entire Appliance, Parts and Labor on Any Part of the Refrigerator that Fails Because of a Manufacturing Defect 2 Year
Limited Warranty for Sealed Refrigeration System*; Parts and Labor 3rd to 6th Year
Limited Warranty for Sealed Refrigeration System*; Parts Only 7th to 12th Year
Limited Warranty for Stainless Steel Rust-Through Lifetime
*Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and connection tubing
CUTOUT DIMENSIONS
TOP VIEW CLEARANCE
Page 2 of 3
3 / 21
213/16"-43/16"
(72-106 mm)
variable water-
connection at
the appliance
173/4"
(451 mm)
84"
(2134 mm)
797/8"
(2029 mm)
71/8" (181 mm)
173/4"
(451 mm)
4" (102 mm)
24"
(610 mm)
141/2"
(368 mm)
797/8"
(2029 mm)
91/16" (231 mm)
173/4" (451 mm)
24" (610 mm)
4"
(102 mm)
measurements in inches (mm)
variable
water-connection
at the appliance
(368 mm)
(830.5 mm)
(231 mm)
(451 mm)
(110 mm)
(2029 mm)
(102 mm)
141/2"
3211/16"
411/32"
797/8"
91/16"
173/
4
"
4"
T18ID905LP
18-INCH BUILT-IN FREEZER COLUMN WITH ICE & WATER DISPENSER
FREEDOM® COLLECTION, PANEL-READY, LEFT-HAND DOOR SWING
PRODUCT AND PANEL DIMENSIONS
ACCESSORIES (OPTIONAL)
FLAT STAINLESS STEEL DOOR PANELS
18-Inch Flat Stainless Steel Door Panel With Dispenser
TFL18ID800
For use with Handle
TFL18ID905
Handleless
STORAGE
ICEBUCKETL
Large Ice Bucket
FRAMEKIT10
Freedom® Frame Kit For any custom column installation in 24-inch deep cutouts. With two metal side trims whose placement between the interior cutout wall and the appliance helps overcome the challenge of unnished cabinet returns.
HANDLES
Choose between two options:
PR36HNDL20
36-Inch Professional Series Handle
or
MS36HNDL20
36-Inch Masterpiece® Series Handle
FILTERS
REPLFLTR55
Freedom® Water Filter Replacement water lter for use in all freezer and bottom freezer models
Heater Kit Required
HEATRKIT20 – 13W @ 120V
Freedom® Heater Kit When two appliances are installed
side-by-side a sealing kit must be used. For combinations that involve a freezer column, this sealing kit is included. For all other (non-traditional, i.e. two wine columns, two bottom freezers, etc.) side-by-side combinations or instances where any appliances are installed less than 6-inches (152 mm) apart from one another but not connected side-by-side, purchase this kit. This kit is recommended for use with any installation in areas that are subject to humidity, or located next to an outside wall.
These warra nties give you specific legal rights and you may have other rights that vary from st ate to state. Limited warranty f rom date of purcha se. For complete warranty det ails, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instru ctions and con sult your countertop s upplie r prior to m aking counter opening. Consul t with a he ating an d ventilation engineer for your spec ific ventilation requirement s. For the most de tailed i nforma tion, refer to installation inst ructions accompanying pro duct o r write to Therma dor indicating the mod el number. Specif ications are co rrec t at time of p rintin g. Ther mador re serves the right to cha nge prod uct specificatio ns or des ign without not ice. Some models are cer tified for use in C anada. Thermador is n ot responsibl e for prod ucts that are t ransp orted from the U.S. for use i n Canada.
1 800 735 4328 | USA THERMAD OR.COM | CA NADA THERM ADOR.C A | ©2021 BSH HOME APPLIANCES CORPORATION. A LL RIGHTS RESERVED.
Page 3 of 3
3 / 21
Loading...