Thermador HPWB48FS, HMWB36FS, HMWN30FS, HMCB36FS Design Guide
128
MODELS SHOWN: HPIN48HS ISLAND HOOD, PRD486GDHU PRO HARMONY® RANGE
AND T24IW800SP FREEDOM® WINE PRESERVATION COLUMN
vEnTiLATiOn
PROFESSiOnAL
& MASTERPiEcE
vEnTiLATiOn
®
SERiES
No need to worry about lingering odors or smoke with our elegant, powerful ventilation systems, featuring design
accents that complement our Professional Series or our Masterpiece Collection. These sophisticated ventilation systems
remove smoke, grease and unhealthy airborne contaminants. From standard wall to specialty hoods, downdrafts, island
and custom inserts, each model has one thing in common: legendary Thermador performance. These powerful, quiet
systems tackle unwanted smoke, grease, heat and odors — quietly and efciently — with ventilation power ranging from
600 to 1,300 CFM.
2010
Masterpiece
Series Hood
1.800.735.4328 | THERMADOR.COM
129
RAngE, RAngETOP AnD vEnTiLATiOn MATRix
PROFESSiOnAL SERiES
= PERFECT FIT = VIABLE OPTION
27-INCH DEPTH, 18-INCH TALL
WALL HOODS
24-INCH DEPTH, 18-INCH TALL
WALL HOODS
24-INCH DEPTH, 11-INCH TALL
WALL HOODS
36" PH36GS
42" PH42GS
48" PH48GS
54" PH54GS
30" PH30HS
36" PH36HS
48" PH48HS
30" HPWB30FS
36" HPWB36FS
48" HPWB48FS*
36-INCH
PRO GRAND
48-INCH
PRO GRAND
48-INCH
PRO GRAND STEAM
27-INCH DEPTH 24-INCH DEPTH 24-INCH DEPTH
42" HPIN42HS
ISLAND HOODS
CUSTOM INSERTS**
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*High heat tested to accommodate Pro Harmony
†Pro Harmony Ranges and Pro Rangetops require a 40-inch minimum distance to combustible materials.
**Custom Insert VCI2__DS is also compatible with Pro Grand Ranges, Pro Harmony Ranges and Professional Rangetops.
48" HPIN48HS
36" VCIN36JP / 36" VCIB36JP
48" VCIN48JP / 48" VCIB48JP
54" VCIN54JP / 54" VCIB54JP
®
or Pro Rangetop 18,000 burners and griddle.
†
†
†
130
vEnTiLATiOn
30-INCH
PRO HARMONY
36-INCH
PRO HARMONY
48-INCH
PRO HARMONY
30-INCH
RANGETOP
36-INCH
RANGETOP
48-INCH
RANGETOP
1.800.735.4328 | THERMADOR.COM
131
cOOKTOP AnD vEnTiLATiOn MATRix
MASTERPiEcE® SERiES
36-INCH
INDUCTION/
= PERFECT FIT = VIABLE OPTION
30" HMWN30FS
30-INCH
INDUCTION
FREEDOM
INDUCTION
30-INCH
GAS COOKTOP
36-INCH
GAS COOKTOP
WALL HOODS
WALL HOODS
WITH BLOWER
CHIMNEY WALL HOODS
CHIMNEY WALL HOODS
WITH BLOWER
GLASS CANOPY HOOD
WITH BLOWER
DRAWER HOOD
WITH BLOWER
36" HMWN36FS
48" HMWN48FS
30" HMWB30FS
36" HMWB36FS
36" HMCN36FS
42" HMCN42FS
36" HMCB36FS
42" HMCB42FS
36" HGEW36FS
36" HDDW36FS
132
40" HMIB40HS
42" HPIB42HS
ISLAND HOODS
WITH BLOWER
CUSTOM INSERTS
DOWNDRAFTS
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*Compatible with cooktops of widths up to 42" †Also compatible with Pro Grand Ranges, Pro Harmony Ranges and Professional Rangetops.
48" HPIB48HS*
30" VCI230DS
36" VCI236DS
48" VCI248DS
30" UCVM30FS
36" UCVM36FS
†
†
†
vEnTiLATiOn
30-INCH
ELECTRIC COOKTOP
30-INCH SENSOR
ELECTRIC COOKTOP
36-INCH
ELECTRIC COOKTOP
36-INCH SENSOR
ELECTRIC COOKTOP
1.800.735.4328 | THERMADOR.COM
133
bLOWER SELEcTiOn
AnD DUcT gUiDE
PROFESSiOnAL SERiES
Type
Type Model No.
WALL
HOODS
ISLAND
HOODS
CUSTOM INSERTS
Available
Sizes (Widths)
PH_GS 36" / 42" / 48" / 54"
HPWB_FS
PH_HS 30" / 36" / 48"
HPIN_HS 42" / 48"
VCIB_JP 36" / 48" / 54" 1000
VCIN_JP 36" / 48" / 54"
30" 600
36" / 48" 1000
Blower Information
600
1000
600
1000
1300
600
1000
600
1000
1300
600
1000
600
1000
600
1000
1300
600
1000
600
1000
1300
600
1000
600
CFM
Remote
•
•
•
•
•
•
•
•
•
•
•
•
Inline
•
•
•
•
•
•
•
•
Integrated
•
•
•
•
•
•
•
•
Model No.
VTN630C 10.3
VTN1030C 13.6
VTR630D 12.1
VTR1030D 14.0
VTR1330E 17.5
VTI610D 12.1
VTI1010D 14.0
Included 3.4
Included 10.2
VTR630D 6.9
VTR1030D 8.8
VTR1330E 12.3
VTI610D 6.9
VTI1010D 8.8
VTN630C 5.0
VTN1030C 8.4
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included 12.7
VTR630D 6.9
VTR1030D 8.8
VTR1330E 12.3
VTI610D 6.9
VTI1010D 8.8
VTN600F 7.4
Total Amps @
Max 10
Amps
120 Volts, 60 Hz
134
MASTERPiEcE® SERiES
30"
WALL
HOODS
CHIMNEY
WALL HOODS
ISLAND HOODS
CUSTOM INSERTS VCI2_DS 30" / 36" / 48"
DOWNDRAFT UCVM_FS 30" / 36"
*Purchase separately at most hardware stores, unless otherwise indicated with a Thermador model number.
HMWN_FS
36" / 48"
HMWB_FS 30" / 36" 600
HMCN_FS 36" / 42"
HMCB_FS 36" / 42" 600
HGEW36FS 36" 600
HDDW36FS 36" 600
HMIB40HS 40" 400
HPIB_HS 42" / 48" 600
600
600
1000
600
1000
600
1000
600
1000
1300
600
1000
1000
600
1000
1300
600
1000
600
1000
1300
600
1000
600
600
1000
600
1000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
VTN600F 4.6
VTR630D 4.3
VTR1030D 7.8
VTI610D 5.8
VTI1010D 7.6
VTN600F 4.6
VTN1000F 8.8
VTR630D 4.3
VTR1030D 7.8
VTR1330E 9.2
VTI610D 5.8
VTI1010D 7.6
Included 3.4
VTN1080F 5.0
VTR630D 6.7
VTR1030D 7.8
VTR1330E 9.2
VTI610D 5.8
VTI1010D 7.6
Included 4.9
Included 4.9
Included 4.9
Included 5.2
Included 5.2
VTR630D 5.2
VTR1030D 7.8
VTR1330E 9.5
VTI610D 5.8
VTI1010D 7.6
VTN600CV2C 6.7
VTR630D 6.7
VTR1030D 10.2
VTI610D 5.8
VTI1010D 7.6
vEnTiLATiOn
Duct Size at BlowerRoofplate Required
Transition with
Backdraft Damper
Duct Size at Discharge Discharge Direction
RFPLT600
RFPLT1000
6-Inch
8-Inch
10-Inch
Included
Hood Information
Required*
6-Inch
8-Inch
10-Inch
Vertical
• • • • •
• • • • •
• • • • • •
• • • • • •
• • • • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • •
• • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • •
Horizontal
Side & Down
Recirculation
Capability
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • •
• • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • •
• • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • • •
• • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • • •
• •
• • •
•
1.800.735.4328 | THERMADOR.COM
• •
CV2T6
CV2T10
CV2T6
CV2T10
• •
• •
• •
• •
36" Only
135
bLOWER OPTiOnS AnD PRESSURE cURvES
inTEgRATED (MOUnTED On hOOD)
vTn600cv2c – 600 cFM vTn600F – 600 cFM vTn630c – 600 cFM
vTn1080F – 1000 cFM vTn1000F – 1000 cFM vTn1030c–1000 cFM
136
bLOWER OPTiOnS AnD PRESSURE cURvES
REMOTE (MOUnTED TO ROOF OR ExTERnAL WALL)
vTR630D – 600 cFM vTR1030D – 1000 cFM vTR1330E –1300 cFM
vEnTiLATiOn
inLinE (MOUnTED bETWEEn KiTchEn AnD ExTERnAL WALL)
vTi610D – 600 cFM vTi1010D – 1000 cFM
nOTE: All measurements are
made with 3 ft. straight duct,
90° bend followed by 1 ft.
straight duct. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
137
EQUivALEnT DUcT LEngThS FOR cOMMOnLY
USED TRAnSiTiOnS
DUcT PiEcE
Smooth
Straight
3 1/4" x 10"
Straight
3 1/4" x 14"
Straight
90° Elbow
Round
45° Elbow
Round
3 1/4" x 10"
90° Elbow
Round
3 1/4" x 10"
45° Elbow
Round
3 1/4" x 10"
Flat Elbow
Round to
3 1/4" x 10"
3 1/4" x 10"
to Round
Round to
3 1/4" x 10"
90° Elbow
SiZE OF DUcT
PiEcE (in.)
6 1.2
7 0.95
8 0.7
10 0.6
N/A 1
N/A 0.7
6 12
7 8
8 6
6 5
7 4
8 3
N/A 5
N/A 15
N/A 20
6 1
7 1
6 5
7 3
6 10
7 8
EQUivALEnT
LEngTh (FT.)
SiZE OF DUcT
DUcT PiEcE
3 1/4" x 10"
to Round
90° Elbow
3 1/4" x 10"
Center Reverse
Elbow Left
3 1/4" x 10"
Center Reverse
Elbow Right
3 1/4" x 10" Left
Reverse Elbow
3 1/4" x 10"
Right Reverse
Elbow
Round
Wall Cap
Round
Roof Cap
2' Long
3 1/4" x 10"
Flex
3 1/4" x 10"
to Round
7" Inline
Backdraft
Damper
3 1/4" x 10"
Roof Jack
and Shutter
nOTE: These commonly used installation parts can be purchased
at a local hardware store. Thermador does not manufacture all
these parts.
PiEcE (in.)
6 10
7 5
N/A 15
N/A 25
N/A 15
N/A 25
6 2
7 2
8 2
10 2
6 2
7 2
8 2
N/A 20
10 1
7
N/A
EQUivALEnT
LEngTh (FT.)
138
VENTILATION
HOODS THAT FIT WITH YOUR KITCHEN
When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select Professional Series for the ultimate
in cooking and venting power or the Masterpiece® Series for its sleek styling and numerous convenience functions.
WALL HOODS
Wall hoods offer exceptional, quiet performance and distinctive design options.
• Efcient, high quality, all stainless steel lters
• Halogen lighting
• Deep enclosure area for excellent capture
• Removable dishwasher-safe grease collection tray
• Recirculation option at 600 CFM
CHIMNEY WALL HOODS
Our chimney style wall hoods impart a more traditional feel to the kitchen space.
• Adjustable chimney heights suit a range of ceilings
• All stainless steel or stainless steel with glass designs available
• Halogen lighting
VENTILATION
• Dishwasher-safe, stainless steel frame lters
• Automatic Clean Filter Reminder light
ISLAND HOODS
Thermador Island Hoods offer excellent overall efciency in drawing away smoke, moisture and heat.
• An option for when a wall surface is not available
• Dishwasher-safe, stainless steel lters
• Slim and sleek design that does not obstruct the views beyond your kitchen
• Halogen lighting
• All stainless steel or stainless steel with elegant glass canopy design
CUSTOM INSERTS
To create a seamless design with wall or island applications, use custom hood inserts.
• Available options for all types of cooking surfaces
• User-friendly ventilation controls or remote control options
• Wall or island applications
• Halogen lighting
DOWNDRAFTS
Downdraft ventilation offers space efciency and a sleek look for non-professional cooktops.
• Over 13-inch intake
• Full-face lter combines a lter with splatter shield in one easy-to-remove, dishwasher-safe element
• Ideal in island applications
• 600 CFM recirculation kit option with integrated blower is available for difcult-to-duct situations
1.800.735.4328 | THERMADOR.COM 139
140
MODELS SHOWN: PH48HS WALL HOOD AND PRG486GDH PRO HARMONY® RANGE AND PA12CVRJ GRIDDLE
COVER ACCESSORY
VENTILATION
WALL
HOODS
VENTILATION — WALL HOODS
Thermador Wall Hoods put the nishing touch on your cooking system, with deep capture areas for
the best overall efciency in drawing away smoke, moisture and heat. These elegant hoods combine
style with vigorous performance, generating ventilation power from 600 to 1,300 CFM. Available
in a variety of heights, widths and depths, they accommodate your individual venting needs. All
models include brilliant halogen lighting for enhanced visibility and convenient speed controls. For
ultra-simple cleanup, the removable lters and grease collection trays t easily in your dishwasher.
1.800.735.4328 | THERMADOR.COM
141
WALL HOODS
FEATURES & BENEFITS
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
DELAYED SHUT-OFF
For the greatest efciency, our Professional ventilation
models include delayed shut-off to tackle lingering odors.
(Except HMWB30FS, HMWB36FS)
POWERFUL VENTILATION
Breathe deeply with the air-freshening power of up to 1,300
CFM. Our new HPWB Series Professional Hood now has blower
included for ease of installation.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: all Thermador ventilation lters are dishwasher-safe,
and many hoods feature a built-in Time-to-Clean-Filter reminder
light. (Except HMWB30FS, HMWB36FS)
BAFFLE FILTERS
Unique low-prole, commercial-style
bafe lters maximize grease capture
without affecting ow, and they’re
dishwasher-safe for easy cleanup.
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use pushbutton controls put accuracy at
your ngertips.
KEEP-HOT SHELF
Hold dishes at serving temperature
on our optional Keep-Hot Shelf.
(Perfect for PH36GS, PH42GS,
PH48GS and PH54GS)
PLANNING INFORMATION
MODEL OPTIONS
When selecting a ventilation system, choose from one of our two
sophisticated appliance collections. Select Professional Series for
the ultimate in cooking and venting power or the Masterpiece®
Series for its sleek styling and numerous convenience functions.
Thermador Wall Hoods are available in various depths and
heights to t your kitchen plans and are meticulously crafted for
both function and design. Be sure to reference the correct model
information in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Wall Hood is properly installed and
grounded by a qualied technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
Install a suitable conduit box (not furnished). An appropriatelysized, UL-listed conduit connector must be used to correctly
attach the conduit to the junction box. Remote blowers require
a 5-wire installation.
REQUIRED
MODEL
PH36GS, PH42GS, PH48GS,
PH54GS 15 or 20 Amp
PH30HS, PH36HS, PH48HS 15 or 20 Amp
CIRCUIT BREAKER
120V AC, 60 Hz
142
HPWB30FS, HPWB36FS,
HPWB48FS 15 or 20 Amp
HMWN30FS, HMWN36FS,
HMWN48FS 15 or 20 Amp
HMWB30FS, HMWB36FS 15 or 20 Amp
WALL HOODS
PLANNING INFORMATION
VENTILATION — WALL HOODS
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specications. Before installing a Thermador Wall
Hood, be sure to verify the cutout dimensions and
electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specications.
HOOD WIDTH
The hood width should be no less than the width of
the cooking surface. Where space is not restricted, a
wider hood can be used to increase your capture area.
DISTANCE FROM COOKING SURFACE
Proper mounting height is very important. If a hood
is mounted too low, it may be difcult to cook and be
unsafe. If a hood is mounted too high, performance
may be compromised. For optimal performance, the
distance from the cooking surface to the bottom of the
hood should be a minimum of 30", unless otherwise
noted. Please refer to the installation manual for each
hood and cooktop/range model for proper hood
mounting heights.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation, these blowers can be
mounted on the roof or exterior wall of your home. An exterior installation
may be more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are mounted along the
duct line anywhere between the kitchen and the exterior wall. If you have
easy access to your duct line (in an attic, for example), this may be an
appealing option.
Integrated Blowers (VTN series)
These blowers are purchased separately and integrated into the hood or
onto the downdraft unit at the time of installation. This option allows you to
select your ideal hood with the exact power you require.
CHOOSING THE RIGHT CFM
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood. Professional gas
cooktops generally should have 1 CFM for every 100 BTU.
You should also consider the cooking space and cooking style of your client.
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 600 CFM may be adequate ventilation for the
cooking space.
AVAILABLE CEILING HEIGHT
The standard ceiling height can vary from region to
region and in homes built in different eras. Ceiling
heights, even in the same room, can sometimes vary
by as much as several inches. Kitchen ceiling heights
can vary between 7'6" (or 90") to over 10' (or 120").
Before selecting a Thermador Hood, check the
available installation space and any extra space that
may remain after proper installation of a hood and
cooktop or range. This extra space can be lled using
Thermador’s stainless steel duct cover accessories or
integrated with kitchen cabinetry. The space can also
be adjusted by raising or lowering your hood within
the recommended range (typically 30" to 36" above
the cooking surface).
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options
(Remote, Inline or Integrated) are available for
Thermador’s Professional and Masterpiece® Series
Hoods. If the unit you have selected does not have
a blower, one can be purchased separately. Blower
selection will vary based on the volume of air that
needs to be moved and the length and location of the
duct run. For long duct runs with multiple turns and
bends, consider using a more powerful blower. For the
most efcient air ow exhaust, use a straight run or as
few elbows as possible.
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a good
alternative.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
LENGTH AND SIzE OF DUCTWORK
Do not use exible duct; it creates back pressure/air turbulence and reduces
performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Proper performance is dependent upon proper ducting. Use a qualied and
trained installer. Local building codes may require the use of make-up air
systems when using ducted ventilation systems greater than specied CFM of
air movement. The specied CFM varies from locale to locale. Consult your
HVAC professional for specic requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 150 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
WARRANTY
Limited warranty parts and labor (2 year)
See page 308 for additional warranty details.
1.800.735.4328 | THERMADOR.COM
143
VENTILATION
27-INCH DEPTH WALL HOOD (36"/42"/48"/54")
PH36GS / PH42GS / PH48GS / PH54GS
PH36GS / PH42GS / PH48GS / PH54GS
PERFORMANCE
- Three fan speeds
PROFESSIONAL
PH36GS – 36-Inch
PH42GS – 42-Inch
PH48GS – 48-Inch
PH54GS – 54-Inch
SPECIFICATIONS
Available Hood Widths 36" / 42" / 48" / 54"
UL Approved for Damp
Environments
Blower Sold Separately – See
Duct Size at Discharge 10" Round
Ducting Direction Vertical or Horizontal
Dishwasher-safe Filters Commercial-Style Bafe
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Infrared Keep-Hot Lights
PAR-38 175W or PAR-40
250W, Included
Electrical 120V AC, 60Hz
Yes
Blower Options Table
36"– 2 Bulbs
42" / 48" / 54"– 4 Bulbs
2
- Auto function senses heat from the cooking surface and adjusts fan speeds
- Powerfully Quiet
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dimmer lighting – for a soft lighting effect
- Two Infrared Keep-Hot Lamps hold food warm until serving time
- Dishwasher-safe stainless steel bafe lters
- Dishwasher-safe grease collection trays are easily removed
- Filter systems are highly efcient at capturing grease
- Vertical or horizontal ducting direction
- Seven different blowers to choose from the lineup according to
cooking needs
- Choose from Inline, Remote or Integrated Blowers
- Blowers sold separately
- Hood includes lters, backdraft damper and transition
- Approved by CSA/UL for damp environments
DESIGN
- 27" depth hood is a perfect companion to the Pro Grand Professional Range
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel nish
- Halogen lighting spotlights your best recipes
- Easy-to-view recessed control panel with stainless steel buttons
- Stainless steel professional bafe lters
®
ventilation systems
144
ACCESSORIES
Keep-Hot Shelf
KHS36QS 36" wide
KHS42QS 42" wide
KHS48QS 48" wide
KHS54QS 54" wide
– Stainless steel nish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
Duct Cover
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA36JBS 36" wide
PA48JBS 48" wide
Width 6-Inch High 12-Inch High
36-Inch DC36US DCT36US
42-Inch N/A DCT42US
48-Inch DC48US DCT48US
VENTILATION
27-INCH DEPTH WALL HOOD (36"/42"/48"/54")
PH36GS / PH42GS / PH48GS / PH54GS
VENTILATION — WALL HOODS
INSTALLATION OPTIONS
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specications.
Hood installation height above a cooktop or range can
vary. To obtain the necessary installation height above
a Thermador Professional Cooktop or Range, consult
the appliance‘s installation manual. Accessory 6"
and/or 12" tall duct covers are used to ll the space
between the hood and ceiling.
Both vertical and horizontal discharge is possible with
either mounting method. The hood is shipped ready
for vertical discharge.
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM Use RFPLT600 in
roof-mount applications
VTR1030D – 1000 CFM Use RFPLT1000 in
roof-mount applications
VTR1330E – 1300 CFM Use RFPLT1000 in
roof-mount applications
INLINE
VTI610D – 600 CFM Use WC10 Wall Cap
VTI1010D – 1000 CFM Use WC10 Wall Cap
INTEGRATED
VTN630C – 600 CFM Use WC10 Wall Cap
VTN1030C – 1000 CFM Use WC10 Wall Cap
REMOTE BLOWER ACCESSORIES
RFPLT600
For use with Remote
Blower VTR630D
RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
ROOF JACK, WALL CAP & TRANSITION
Roof Jack – RJ310 Wall Cap–WC10 Transition
REMOTE (Mounted to roof or external wall)
VTR630D – 600 CFM VTR1030D–1000 CFM VTR1330E – 1300 CFM
HOOD DIMENSIONS
1.800.735.4328 | THERMADOR.COM
INLINE (Mounted between kitchen and external wall)
VTI610D – 600 CFM VTI1010D – 1000 CFM
INTEGRATED (Mounted on hood)
VTN630C – 600 CFM VTN1030C – 1000 CFM
145
VENTILATION
24-INCH DEPTH WALL HOOD (30"/36"/48")
PH30HS / PH36HS / PH48HS
PH30HS / PH36HS / PH48HS
PERFORMANCE
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Filter systems are highly efcient at capturing grease
PROFESSIONAL
PH30HS – 30-Inch
PH36HS – 36-Inch
PH48HS – 48-Inch
SPECIFICATIONS
Available Hood Widths 30" / 36" / 48"
CSA Approved for Damp
Environments
Blower Sold Separately – See
Duct Size at Discharge 10"
Ducting Direction Vertical or Horizontal
Dishwasher-safe Filters Commercial-Style
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical 120V AC, 60Hz
Yes
Blower Options Table
Stainless Steel Bafe Filter
30" / 36"– 2 Bulbs
48"– 4 Bulbs
- Dishwasher-safe grease collection trays are easily removed
- Powerfully Quiet
- Blowers sold separately
- Seven different blowers to choose from the lineup according
to cooking needs
- Choose from Inline, Remote or Integrated Blowers
- 10" Round duct size
- Vertical or horizontal ducting direction
- Hood includes lters, backdraft damper and transition
- Approved by CSL for damp environments
DESIGN
- 24" depth hood is 18" tall and a perfect companion with
Pro Harmony Ranges and Rangetops
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel nish
- Stainless steel control buttons
- Halogen lighting spotlights your best recipes
- Stainless steel professional style bafe lters
- Dishwasher-safe stainless steel bafe lters
- Dimmer lighting – for a soft lighting effect
®
ventilation systems
146
ACCESSORIES
Keep-Hot Shelf
KHS36QS 36" wide
KHS42QS 42" wide
KHS48QS 48" wide
– Stainless steel nish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
Duct Cover
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA30JBS 30" wide
PA36JBS 36" wide
PA48JBS 48" wide
Width 6-Inch High 12-Inch High
30-Inch DC30US DCT30US
36-Inch DC36US DCT36US
48-Inch DC48US DCT48US
Loading...