Page 1
y
y
j
y
y
TherAdapt® Products Inc.
y
g
y
Adjustable Angle Bench
Please read all of the following information before using this product.
TherAdapt® Products Inc. has designed and manufactured this product with the well being of the user
and caregiver(s) in mind. It is our endeavor to provide products which are attractive, comfortable,
useful, highly adjustable, long lasting and safe. As when using any product, precautions must be taken.
THE MANUFACTURER IS NOT RESPONSIBLE FOR INJURIES RESULTING
FROM ANY CUSTOMIZATION OR MODIFICATION OF THE EQUIPMENT THAT
WAS NOT COMPLETED BY THE MANUFACTURER.
USE: The Adjustable Angle Bench is designed for a single purpose: as a freestanding bench. It is to be used by a single
individual that is seated in the center of the bench with their feet firmly placed on the floor. No other use is permitted.
CARE:
and washers are properly positioned and secure. Contact the manufacturer for replacement or repair of necessary items. All
components may be cleaned with mild soap and water, or a gentle sanitizing spray. Do not use abrasive cleaners. Wipe
wood components dry after cleaning. Excess amounts of liquid on the wood may damage the finish. Always store indoors.
Take care to inspect the ongoing condition of all parts of your Adjustable Angle Bench. Verify that all knobs, bolts,
WARRANTY: The manufacturer provides a full one (1) year warranty, beginning the date
shipped b
breaka
or modification beyond the normal capacit
will void the warranty. The foregoing is TherAdapt’s sole liability for consequential damages.
the manufacturer. The warranty provides full replacement of all parts against
e when used in compliance with the manufacturer’s USE and CARE instructions. Use
WARNING: This product must only be used under the
recommendation of a ph
with adult supervision. Never leave user unattended.
It is
Ad
instructions or ASSEMBLE the bench properl
result in bodily injury.
our responsibility to properly use and maintain your
ustable Angle Bench. Failure to follow USE and CARE
or range of adaptability designed into the products
sician and / or licensed therapist and
as outlined ma
PLEASE COMPLETE AND RETAIN FOR YOUR RECORDS
Adjustable Angle Bench AAB- _________ Serial Number: _________________
Purchase date: ______________________
Page 2
TherAdapt Adjustable Angle Bench (AAB-100/200) Instructions
Packing List:
(1) Bench top component with suede Naugahyde
(2) Rectangular side pieces with (4) ¼ -20 counter-sunk bolts each
(2) Curved rectangular floor pieces
(8) Thru-knobs with ¼ -20 threaded inserts
(8) Nylon washers
3. Adjust the angle.
The outermost, curved, rectangular side pieces
determine the angle setting. Remove the outer
pair of knobs and lift off the angle piece. Note:
This piece must be lifted off completely to make
adjustments. The bench angles from a horizontal
setting using the bottom hole to a 10°, 15°, 20°,
25°, or 30° angle using the five ascending holes.
Tighten all knobs securely before using.
®
padding
1. Attach the curved, rectangular floor pieces.
Remove the (4) lower thru-knobs, attach floor pieces,
and replace thru-knobs. Tighten securely before use.
2. Adjust the height.
To adjust, we recommend standing the bench on one
end, and removing the pair of knobs on the inner
surface of the upper rectangular sidepiece. The
combined height and angle adjustable pieces can be
lifted off and the appropriate height determined by
putting bolts through one of the four pairs of holes
drilled in the sides.
TherAdapt
®
Adjustable Angle Bench (AAB-100/200) Instructions: Page 1 of 1
Loading...