The Procter and Gamble 61810 User Manual

Ensuring the Sensor
is Clean

• Clean the Sensor with a damp cloth,

baby wipe or alcohol wipe regularly.

• Ensure that the clear windows at

the back of the Sensor are free from
dirt to enable it to function well.

Warning: Do not submerge in water.

Important Safety, Compliance
and Warranty Information

Please read in full before product use.

children. If you think batteries might
have been swallowed or placed inside

Safe Usage Guidelines

• This product is suitable to use from
birth to 12 months of age.

• This product is not a substitute for
adult supervision and is not a
Medical Device.

• Do not submerge this product in
water. Clean only with a damp cloth,
baby wipe or alcohol wipe.

• CAUTION: This product is not a toy
and should be placed and used only
as intended. Do not allow children
to handle or play with this product.
To prevent mouthing or chewing,
keep out of reach of children.

• This product contains a non­ replaceable and non-rechargeable
battery. Do not attempt to open
this product and to remove or
replace the battery. When the
product no longer operates, please
dispose in accordance with the local
waste and recycling guidelines in
your city or municipality.

• WARNING: This product
contains a Button or a Coin Cell
Battery. A swallowed Button or
Coin Cell Battery can cause internal
chemical burns in as little as two
hours and lead to death. Dispose of
this product when it no longer
operates immediately. Keep new
and used batteries away from

any part of the body, seek immediate
medical attention.

• Do not press on or bend the
product with excessive force.

IP Rating (per IEC 60529): IPX4

Disposal of waste batteries.

This product contains a
battery, do not dispose this
device with other household
waste. Instead, hand over to
the appropriate collection point for
recycling in accordance with local and
municipality disposal and recycling
guidelines.

Disposal of Electrical & Electronic
Equipment. This symbol

indicates that this product
should not be treated as
household waste. Instead
hand it over to the appropriate
collection point for the recycling of
electrical and electronic equipment
which will conserve natural resources.
Ensuring proper product disposal
prevents potential negative
consequences for the environment
and human health, which may be
caused by inappropriate handling.
For more information, contact your
city or your local household waste
disposal service.

FCC Statement

This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:

(1) this device may not cause harmful
interference, and

(2) this device must accept any
interference received, including
interference that may cause
undesired operation.

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.

However, there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment o and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an
outlet on a circuit dierent from
that to which the receiver is
connected.

• Consult the dealer or an
experienced radio/TV technician for
help.

FCC Caution

• Any changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.

• The antenna(s) used for this
transmitter must not be co-located
or operate in conjunction with any
other antenna or transmitter.

Limited Hardware Product
Warranty – A Summary

The limited warranty only covers
product defects caused by
workmanship or build materials.
The duration of this warranty is
within one year from date of
purchase.

See www.lumibypampers.com/
warranty or call us at at
1-833-Lumi4Me (833-586-4463) for
additional warranty information about
your product including procedures to
act on a warranty claim.

Procter & Gamble’s entire liability and
your exclusive remedy for any breach
of warranty shall be, at Procter &
Gamble’s option, to repair or replace a
functional equivalent of the product,
or to refund the price paid, if the
hardware is returned with the original
packaging and original receipt to an
address to be defined by our
customer service agents available at
1-833-Lumi4Me (833-586-4463).

Need Assistance?

Visit us at www.lumibypampers.com/
help or call us at 1-833-Lumi4Me
(833-586-4463).

© 2019. The Lumi by Pampers™ name
and logo and the Lumi bunny™ logo
are trademarks of Procter & Gamble.
TestFlight® is a registered trademark
of Apple Inc.

Designed in San Francisco.
Distributed by Procter & Gamble,

Cincinnati, OH 45202,
United States of America

Made in CHINA.

TM

Soft Touch Sensor

Quick Start Guide

Connected Care System

Getting started is
quick and easy.

1. Download the TestFlight®
app from your TestFlight
e-mail invitation.

2. From the TestFlight
app, install the
Lumi by Pampers™ app.

3. Open the
Lumi by Pampers™ app
and follow the on-screen
set-up instructions.

What’s in the BoxWelcome to the

1 Soft Touch Sensor

Each Sensor's battery is designed to last
around 3 months. You can view the status
of the battery in the app.

Warning: Battery is non-replaceable
and non-rechargeable.
Do not attempt to open this product.

Features

The Soft Touch Sensor works exclusively
with the unique Lumi by Pampers™ diapers
to automatically track:

Wet diapers

Sleep

How to Attach the Sensor

• With each diaper change, attach the back

(white side) of the Soft Touch Sensor on the
dotted outline on the Lumi by Pampers diaper.
Make sure the Lumi bunny is upright.

• Gently press the Sensor onto the diaper to

ensure it is attached properly. We recommend
to attach the sensor before putting the diaper
on your baby.

• Move the Sensor to a new diaper with

every diaper change. Remove it by gently
peeling it o the diaper.

• Use only with Lumi by Pampers™ diapers

and only as intended.

Need Assistance?

Visit us at www.lumibypampers.com/help or
call us at 1-833-Lumi4Me (833-586-4463).

90516156

connected care system