How it Works
The Genie a Division of Overhead Door
Loading...
315390R2
Users Manual
20 pgs2.62 Mb0

The Genie a Division of Overhead Door 315390R2 Users Manual

®
2060-3060 eng.qxd 11/9/05 11:02 AM Page 1
Operation and Maintenance Manual
3559935770
2060
TABLE OF CONTENTS
Warranty Information . . . . . . . . . . . . . . . . . . . 2
Your Documentation Package . . . . . . . . . . 3
Safety Information . . . . . . . . . . . . . . . . . . . . . 4
Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Programming the Remote Control . . . . . 11
Scheduled Maintenance . . . . . . . . . . . . . . . 13
Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . 16
Parts Lists and Exploded Views. . . . . . 17-18
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3060
AC POWERED SCREW DRIVE OPENERS
COMPLETE WITH INTELLICODE REMOTE CONTROL AND SERIES II ELECTRONICS
For up to 7'-6" tall Doors. (Extension Kit available for 8' Doors) Included Wall Control MUST be installed prior to Operation of
this Garage Door Operator. Safe-T-Beam®Safety Reverse System Must be Installed and
the Force Controls MUST be Properly Set to close door. This Equipment meets or exceeds all Federal, State and UL 325
Safety Requirements.
Having Difficulty? Need Help?
Please call us: 1-800-35-GENIE (354-3643) www.geniecompany.com
Please have Model information ready when calling
.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
2060-3060 eng.qxd 11/9/05 11:02 AM Page 2
THE GENIE COMPANY LIMITED WARRANTY
What is covered?
Any defect in material and product workmanship from personal, normal household use
in accordance with the Owner’s Manual.
For how long?
MODEL 2060L . .. 20 years on motor,3 years all other parts. MODEL 3060L . .. Lifetime* on motor,3 years all other parts. MODEL 3060C . .. Lifetime* on motor,3 years all other parts.
*Lifetime = For as long as you own your home.
Who gets the warranty?
This warranty is limited to the consumer who originally purchased the product.
Geographic scope:
This warranty applies only to units installed and operated within the country where they were purchased.
Limitations:
IMPLIED WARRANTIES, INCLUDINGTHOSE OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY (AN UNWRITTEN WARRANTY THAT THE PRODUCT IS FIT FOR ORDI­NARY USE), ARE LIMITED TO ONE YEAR FROM THE DATE OF PURCHASE. GENIE WILL NOT PAY FOR: LOSS OF TIME; INCONVENIENCE;LOSS OF USE OFYOUR GENIE PRODUCT OR PROPERTY DAMAGE CAUSED BY YOUR GENIE PRODUCT OR ITS FAILURE TO WORK; ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES; OR ANY DAMAGES RESULTING FROM MISUSE OR MODIFICATION OF YOUR GENIE PRODUCT.
Some states and provinces do not allow limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages,so the above limitations or exclusions may not apply to you.
This warranty is the only one we will give on your Genie product,and it sets forth all our responsibilities regarding your Genie product.Thereare no other express warranties.
State and province rights:This warranty gives you specific legal rights,and you may also have other rights which vary from state to state and province to province.
How to get warranty service:
To obtain warranty service for your Genie product,you must provide proof of the date and place of purchase of the product.
1.Do-It-Yourself-Service.
Call the Genie Consumer Connection toll free at 1.800.354.3643 to speak in person to a trained Genie representative for assistance in diagnosing the problem and arranging to supply you with the required parts for do-it-yourself repairs.Trained service repre­sentatives are available Monday-Friday, 8:00 a.m.- 11:00 p.m., Eastern Time, and on Saturday,10:00 a.m. to the information you need at
7:00 p.m., Eastern Time (subject to holidays) You may also get
www.geniecompany.com.
2.Service From Authorized Dealers.
You also may obtain warranty service from Genie authorized dealers by calling the Genie Customer Service at 1.800.354.3643 or by visiting before scheduling warranty service. If warranty service is provided by an authorized dealer,Genie will provide all required parts under warranty at no charge to you,but the dealers are independent business people and may render a bench or service call charge for their services. Genie will not reimburse you or otherwise be responsible for those charges.
We suggest that you retain your original packing material in the event we choose to repair or replaqce your Genie Product and request that you ship it to us.Be sure to include your name,address, telephone number, proof of date and place of purchase and a description of the operating problem. After repairing or replacing,your Genie product, we will ship it to your home at no cost to you for parts and labor, but you will have to pay a minimum of $5.00 for shipping and handling charges.
Your choice of either one of the above-described service options is your exclusive remedy under this warranty.
www.geniecompany.com
What this warranty does not cover:
This warranty does not cover batteries (which are considered replaceable parts),installa­tion, commercial use, defects resulting from accidents,damage while in transit to our service location or damage resulting from alterations, misuse or abuse, lack of proper maintenance, unauthorized repair or modification of the product, affixing of any attach­ment not provided with the product, programming of the Remote Control Devices, Safe-T-Beam® adjustment/cleaning, staples through wiring, pinched or broken wires, Carriage disengaged, Force Control adjustments, door out of balance, broken springs or cables, power outages, use of extension cords,missing or damaged parts on dis­counted,clearanced, final sale or taped cartons,phantom operations (labor is not cov­ered if Opener is functioning properly while technician is in garage),fire,flood,or acts of God, or other failure to follow the Owner’s Manual.
Please note the following information,so it is available if you need to call us.
Date Purchased ______________________________
/ /
Serial Number ______________________________
Operator Model ______________________________
Remote Control Model ______________________________
Dealer Name ______________________________
Dealer Address ______________________________
City ______________________________
State ______________________________
Zip ______________________________
NOTE
Please keep original or photocopy of your sales receiptwith this manual for future reference should service ever be required.
FOR ANSWERS: CALL 1.800.354.3643
Model Number and Serial Number are located on front panel inside the lens.
Visit Our Website at: www.geniecompany.com
SAVE THESE INSTRUCTIONS
2
For Help,call 1-800-35-GENIE or visit www.geniecompany.com
2060-3060 eng.qxd 11/9/05 11:02 AM Page 3
YOUR GARAGE DOOR OPENER DOCUMENTATION PACKAGE
The documentation provided with your opener has been carefully designed and organized to make the assembly, operation,and continued maintenance of your product as easy and safe as possible.This material consists of two main items.
Operation and Maintenance Manual
While it is recommended that all documents be retained for future reference, this manual should contain most of the information that you will need over the lifetime of your product.The manual is designed in a “flip-flop” configuration with the english version in one half of the book and the spanish / french version in the other half.The basic contents of this manual are:
English Language DASMA
Spanish / French Language DASMA
· Warranty Information
· Pre Installation Checklist to be reviewed prior to any
assembly or installation
· Necessary Adjustments
· Programming Remote Devices
Tri-Lingual Entrapment label
· Maintenance and Troubleshooting
· Parts Explosions
· Accessory Order Form
·
Door Opener Association Safety and Maintenance Brochure (DASMA)
· Entrapment Warning Label - To be Adhered in close proximity
English Language Version
Spanish / French Language Version
to wall control
Assembly and Installation Poster
This poster is intended to give a convenient lay flat media to be used at the site of assembly and installation.Color coding is used to highlight steps and other information as clearly as possible.This poster is Tri-Lingual with english instructions highlighted with a blue background.The basic contents of this Poster are:
Opener Installation
· Quick Reference Poster
· Pictorial and step by step opener assembly instructions
· Pictorial and step by step opener installation instructions
Quick Reference Diagram
Opener Assembly
IT IS CRITICAL THAT ALL SAFETY WARNINGS MARKED CLEARLY IN BOTH
THE MANUAL AND POSTER ARE READ, UNDERSTOOD AND FOLLOWED.
The Genie Company is constantly striving to improve our products and the documentation that comes with them.If you have any
suggestions or ideas for improving this product and it’s documentation, please forward them to:
The Genie Company
22790 Lake Park Blvd.
Alliance, Ohio 44601-3498
For Help,call 1-800-35-GENIE or visit www.geniecompany.com
3
2060-3060 eng.qxd 11/9/05 11:02 AM Page 4
OVERVIEW OF POTENTIAL HAZARDS
Overhead doors are large,heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual. If you have questions or do not understand the information presented, call The Genie Company. or your local Genie Distributor.
In this section, and those that follow, the words information. The word:
indicates an imminently hazardous situation which, if not avoided,will result in death or serious injury.
DANGER WARNING CAUTION
The word NOTE is used to indicate important steps to be followed or important considerations.
:
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
:
indicates a potentially hazardous situation which, if not avoided, may result in injury or property damage.
:
SAFETY INFORMATION
Danger, Warning and Caution are used to emphasize important safety
POTENTIAL HAZARD
MOVING DOOR
Could result in death
ELECTRICAL SHOCK
Could result in death
HIGH SPRING TENSION
EFFECT
WARNING:
Could result in death
or serious injury.
WARNING:
or serious injury.
WARNING:
or serious injury.
• Keep people clear of opening while door is moving.
•
• Do Not operate a door that jams or one that has a broken spring.
• Turn off power before removing operator cover.
• When replacing cover, make sure wires are not pinched or near
• Operator must be properly grounded.
• Do Not try to remove, repair or adjust springs or anything to
• Repairs and adjustments must be made by a trained door system technician using proper tools and instructions.
IMPORTANT INSTALLATION INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH:
1 READ AND FOLLOW ALL SAFETY, INSTALLATION AND
OPERATION INSTRUCTIONS. If you have any questions or do not understand an instruction, call your authorized Genie installation professional.
2 Do Not install operator on an improperly balanced
door. An improperly balanced door could cause severe injury. Repairs and adjustments to cables, spring assembly,and other hardware must be made by a trained service person using proper tools and instructions.
3 Remove all ropes,and disable all locks connected to
the door before installing operator.
4 Install door operator 7 feet or more above the floor.
Mount the emergency release knob 6 feet above the floor.
5 Do Not connect the operator to the source of power
until instructed to do so.
6 Locate the control button:
• Within sight of door.
• At a minimum height of 5 feet, so small children cannot reach it.
• Away from all moving parts of the door.
7 Install the entrapment WARNING label next to the
wall button or console. Install the emergency release tag on, or next to, the emergency release
8 The operator must reverse when the door contacts a
1-1/2 inch high object on the floor at the center of the doorway.This is about the size of a 2" x 4" board laid flat.
:
PREVENTION
Do Not allow children to play with the door operator.
moving parts.
which door spring parts are fastened, such as, wood blocks, steel brackets, cables or other like items.
SAFETY FEATURES
Safe-T-Beam®(STB) Non-Contact Reversing System
Places an invisible beam across door opening,that reverses the door during down travel to the fully open position if anything passes through beam.
Safe-T-Reverse®Contact Reversing System
Automatically stops and reverses a closing door within 2 seconds of contact with an object.
Safe-T-Stop®Timed Reversed System
Automatically opens a closing door, if door does not close within 30 seconds.
ForceGuard®Control
Used to set the force required for opening and closing door.For maximum safety,set the minimum force required to fully open and close door.
Automatic Lighting System
Light bulbs up to 60 Watts max. ,used for safer entries and exits.The lights turn on when door is activated and automatically turn off 4.5 minutes later.
Manual Emergency Release
Allows the garage door to be opened or closed manually for emergencies or maintenance.
4
For Help,call 1-800-35-GENIE or visit www.geniecompany.com
SECTIONAL DOOR, TORSION SPRINGS SECTIONAL DOOR, EXTENSION SPRINGS
ONE-PIECE DOOR, TRACKLESS
2060-3060 eng.qxd 11/9/05 11:02 AM Page 5
PRE-INSTALLATION CHECKLIST
This Opener includes parts and supplies needed to install in most garages and connect to doors. A few additional parts and supplies may be needed to install Opener into your garage and connect to your garage door. While checking items listed below,note any additional items you will need.
Tools used in this section:
• 12'+ Tape Measure • Pencil • Ladder • Level
Check following items before assembling Opener:
Check Step 1:
Check condition of vertical stile in center of door (Figure 2),and its connection to door’s top and bottom beams.
A If door frame is nailed together and not a solid connection, door frame
B If door is “lightweight” (made with frame and skin - not solid), door
C A door opener reinforcement bracket may also be needed to connect
D Contact your Genie Factory Authorized Dealer or dealer of your garage
E If you have a wooden door, measure door’s thickness. (1/4" x 2") Lag
most garage doors. There are many variations of garages and garage
CHECK DOOR CONDITION AND THICKNESS
must be braced or reinforced before installing Opener.
(including door frame) must be braced or reinforced before installing Opener.
garage door to Opener's Door Bracket. This Opener is designed for installation on a one-piece door.
door for any necessary bracing and a door opener reinforcement bracket (if needed) before proceeding.
Screws are included for installing Door Bracket onto door. If your door is less than 2” thick, brace door or use shorter Door Bracket Lag Screws (1/4" x 1-1/4" – not included)
properly braced sectional door or solidly braced
WARNING
:
If your door sticks, binds, or is out of balance, have it adjusted by a Genie Factory Authorized Dealer. Door springs, cables, pulleys, brackets and associated hardware are under extreme tension and can cause serious injury or death.
KEEP FEET CLEAR OF DOOR
3' - 4'
Sectional Door
Check Step 2:
CHECK GARAGE DOOR ALIGNMENT,OPERATION,
AND BALANCE
A Raise door, check alignment and see if it moves freely (Figure 1). If door
appears out of alignment, binds, or does not move smoothly,contact a Genie Factory Authorized Dealer or dealer of your garage door for repairs and adjustments to door mechanism.
B Raise door to 3' – 4' above ground and carefully let go. Door should stay
stationary. Slight movement is acceptable. More than slight movement means door is out of balance. Contact a Genie Factory Authorized Dealer or dealer of your garage door for repairs and adjustments to door mechanism.
C Check door type.
Make a note of whether it is a sectional or a one-piece door (Figure 2).
Header Area
Torsion Springs
Extension Springs
Center
Stile
Header Area
3' - 4'
One-Piece Door
Figure 1 Checking door balance
Header Area
Center Stile
For Help,call 1-800-35-GENIE or visit www.geniecompany.com
Figure 2 Note Door Type
5
H + 2-1/2”
H
H
H + 6”
2060-3060 eng.qxd 11/9/05 11:02 AM Page 6
Check Step 3:
Measure garage door height (7'-6", 8'-0", or taller) with tape measure.
A If door height is 7'-6" or less, continue with Check Step 4. B If door height is 8'-0", you need a Rail Extension
Figure 3) (See Accessories Order Form,page 19).
Kit. (
C
If door height is taller than 8'-0", you will require a different rail Contact an Genie Customer Service Representative at
35-GENIE.
Check Step 4:
MEASURE GARAGE DOOR HEIGHT
1-800-
CHECK DOOR HEADER AREA
NOTE
The header is a heavily reinforced section of the wall just above the top of the garage door opening.
A Find vertical center line of door and header:
• Close door.
• Measure door width at top.
• Mark a point at center of door and on header directly
above door. Draw a center line to connect points.
B Find Header Bracket mounting height (Figure 4):
(Do not attach Header Bracket).
• Raise door, watching top edge of door and stop door
when its edge reaches its highest point.
• Measure distance (“H”) from top edge of door to floor.
– For sectional doors, add 2-1/2" to “H”. Mark a point
on center line. Bottom of Header Bracket will be installed here.
– For one-piece doors, add 6" to “H”. Mark this point on
center line. Bottom of Header Bracket will be installed here.
Rail Extension for
8' door
.
Figure 3 Rail Extension Kit
SECTIONAL DOOR
HEADER
ONE-PIECE DOOR
NOTE
• For both types of doors:
C Check wall for a stud or a solid header at your mark:
6
– If the ceiling in your garage is so low that there is
not at least a 3" space above the Header Bracket mounting point, contact a Genie Factory Authorized Dealer.
• If a door spring is in the way, place the Header
Bracket above the spring.
WARNING
Do Not move the door spring.
:
Door springs are under extremely high tension and should be handled ONLY by a trained professional.
(If checking a finished wall, a stud finder may be helpful).
• If location is above Header,a 2" x 6" board must be
screwed to studs beside your mark with at least two Lag Screws and Flat Washers (not provided).
• Transfer your mark to new mounting board.
HEADER
Figure 4 Find Highest Point of Travel
For Help,call 1-800-35-GENIE or visit www.geniecompany.com
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use