The Galley IBS-18-BA, IBS-18-GT, IBS-18-GR, IBS-18-WH, IWS-3-S-DD-12-S-BA Installation Guide

Ideal Workstation, BarStation™ and DryDock™

Installation Guide

Single Bowl Workstations & BarStation™

18” Finished cutout

1/2” Reveal front

and back

16”

Side view applies to all

Single Bowl Workstations

10”

IWS 7S

IBS C

IWS 2C

IWS 6S

IWS 5S

IWS 3S

SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE

Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Galley Soap Dispenser 1" min hole diameter
Galley Deck Switch 1 3/8" min hole diameter
Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter
Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Center hole diameters 2" behind cutout
Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap

IWS 4S

Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories

1

18” Finished cutout

1/2” Reveal front

and back

16”

Side view applies to all

Double Bowl Workstations

Double Bowl Workstations

10”

IWS 7D

IWS 6D

IWS 5D

SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE

Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Galley Soap Dispenser 1" min hole diameter
Galley Deck Switch 1 3/8" min hole diameter
Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter
Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Center hole diameters 2" behind cutout
Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap

IWS 4D

Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories

2