The First Years babyPro User Manual

babyPro

TM

SmartWarmer

Instruction Manual

basket

water container

water container holder

valve cap

warming chamber

bottle warming unit

control panel

ON button

power cord

Y4574

optional lift-out basket

optional adapter ring

TM

TO USE

1. Position the Bottle Warmer on any convenient at surface. Be sure to place
out of reach of children.

2. Insert the plug into wall outlet.

3. Remove the water container. Unscrew the valve cap. Fill water container
with water. Screw cap back on. Replace water container in holder.

NOTE: Water bottle does not need to be lled before each use.

4. Preheating is not necessary.

5. Insert basket and position bottle in warming chamber.

For standard reusable bottles, straight or angled and glass bottles:

Snap the adapter ring onto the top of the warming chamber and place
bottle in chamber. The ring will keep the bottle properly centered for even
heating.

For most disposable bottles and baby food jars:

No adapter ring is needed. Place bottle in the lift-out basket and insert into
the warming chamber. Do not remove the larger basket.

NOTE: Remove lid of baby food jar before placingin the lift-out basket.

For wide-neck bottles:

No adapter ring or lift-out basket is needed. Place bottle in large basket
inside warming chamber.

2