Page 1
Thecus C10GTR
Installation Guide
Page 2
Thecus C10GTR Layout
Major components of the C10GTR :
CAT 6a
PCI-E Interface
Page 3
Installation Procedure :
1. Ensure the motherboard is completely powered down
2. Insert the C10GTR into the PCI-E slot.
3. Insert the installation CD into your CD-ROM drive on the host PC.
4. The installation menu should launch automatically.
5. Click C10GTR Driver to install the driver.
English
Page 4
Product Specifications
1. Hardware Platform
Item
Spec
Interface
Interconnector
10GBase-T
Cabling Type
CAT 6a
LINK SPEED ( Orange=10G / Yellow = 1G)
Power Consumption
4.95W/10G, 3.3W/1G, 2.48W/100M
Dimension
Low Profile
-40ºC to 85 ºC
Item
Spec
10Gb/1000Mb/100Mb auto negotiation support
Windows® Server Server 2012, 2008R2,
• Hyper V
PCI Express Host Bus
LED indicator LINK (Solid) / ACTIVITY (Blinking)
Operating Temperature
Storage Temperature:
2. Software Functions
MAC and Media
Interfaces
Operating Systems
Supported
For more information or on-line resources, please visit http://www.thecus.com.
Compatible with PCI Express Rev2 x4, x8 slots
0 ºC to 70 ºC
•
• XAUI interface
• IEEE 802.3az support (EEE)
• Jumbo frame support (16K)
• IEEE 802.1q VLAN support
• RFC2819 RMON MIB statistics
• Multicast
• IEEE 802.3ad Link Aggregation support
•
Windows 8, Windows 7
• Linux 2.6, Linux 3.x
• VMWare 5.x
Copyright© 2014 Thecus Technology Corp. All rights reserved.
Thecus and other names of Thecus products are trademarks or registered
trademark of Thecus Technology Corp. Other products and company names
mentioned herein are trademarks of their respective companies.
Loading...