Theben 201 9 290, compact passage KNX Installation Manual

1103035307 / 10.16 © Theben HTS

Art. Nr. 201 9 290

Presence detector

compact passage KNX

DK

D

F

GB

E

I

NL

S

N

FIN

Bedienungsanleitung 2

Notice d´utilisation 24

Installation manual 46

Manual de instrucciones 68

Istruzioni per l'uso 90

Gebruikershandleiding 112

Bruksanvisning 134

Bruksanvisning 156

Käyttöohje 178

Betjeningsvejledning 200

4646

English

Installation manual

Presence detector

compact passage KNX

Table of contents

1. Safety ..................................................47

2. Function and performance characteristics. . . . . . . . . . . . . . . . . . . . . . . 48

3. Fitting and connection ......................................50

4. Start-up procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

5. Setting the Brightness Value ................................. 56

6. Test Operation ............................................ 57

7. Examples ................................................58

8. Technical specications ..................................... 61

9. Warranty declaration .......................................62

10. Troubleshooting .......................................... 63

4747

GB

Thank you for purchasing an Theben HTS presence detector and putting
your trust in us.

1. Safety

Familiarise yourself with the compact passage KNX before assembly and
start-up by reading this operating instructions.

IMPORTANT!

The unit requires no maintenance. Opening the unit or inserting foreign
bodies into it will invalidate the warranty.

Proper use

The presence detector serves exclusively for the purpose contractually ag­reed between the manufacturer and the user. Any other use is regarded as
improper. The manufacturer is not responsible for any resulting damage.

4848

2. Function and performance characteristics

The presence detector compact passage KNX detects persons within a corri­dor. Simultaneously, its light sensor measures the brightness in the room and
compares it to the pre-set brightness threshold.

● Control of one or two lighting groups

● Switching mode or constant light control

● Semi or fully automatic operation

● Presence output with switch-on/off delay time

● Surveillance mode with manipulation protection

● Brightness value output in Lux

● Parallel circuit operation of several detectors (Master-Slave, Master-

Master) without logic component

● Mixed light measurement suitable for uorescent lamps (FL/PL/ESL),

halogen/incandescent lamps and LEDs

● Mechanical safety locking

● Management remote control „Sendo Pro 868 A (optional)

4949

GB

2.1 Switching Mode

The lighting switches on in case of presence and insufcient brightness, and
off in case of absence or sufcient brightness

2.2 Constant Light Control Mode

In Constant Light Control mode, the brightness is constantly maintained
at th pre-set value. It can be started fully automatically or manually using the
push button or remote control. Manually switching off, dimming or changing
the settings stops control mode for the duration of the presence.

5050

M'height radial (r) tangential (t)
2,0 m 56 m

2

16m ± 1,5m x 3,5m 56 m

2

16m ± 1,5m x 3,5m

2,5 m 72 m

2

18m ± 1,5m x 4,0m 88 m

2

22m ± 1,5m x 4,0m

3,0 m 90 m

2

20m ± 1,5m x 4,5m 150 m

2

30m ± 1,5m x 4,5m

3,5 m 100 m

2

20m ± 1,5m x 5,0m 150 m

2

30m ± 1,5m x 5,0m

4,0 m 100 m

2

20m ± 2,0m x 5,0m 150 m

2

30m ± 2,0m x 5,0m

4,5 m 100 m

2

20m ± 2,0m x 5,0m 150 m

2

30m ± 2,0m x 5,0m

5,0 m 100 m

2

20m ± 2,5m x 5,0m 150 m

2

30m ± 2,5m x 5,0m

6,0 m 100 m

2

20m ± 2,5m x 5,0m 150 m

2

30m ± 2,5m x 5,0m

3. Fitting and connection

3.1 Presence detection

The ideal mounting height is 2 m – 3,5 m.
The sensitivity of the detector decreases with increasing mounting height.

The detection ranges of multiple detectors should overlap in their fringe zone.
Ensure the horizontal installation of the detector.

At installation heights between 3.5 and 6 m, the extent and distance between
the active and passive zones increase.

5151

GB

Detection range (mounting height 3,0 m)

Please note: because of the virtually horizontal detection of compact passa-

ge to both directions, the detection range of tangential (t) movements of per­sons is different to the range of radial (r) movements towards the detector.

3.2 Light measurement

The detector measures articial
light and daylight reected directly

beneath the detector (beam width
approx. ± 30°). The mounting loca­tion is used as the reference for the
lighting levels.

Switching

Direct light inuences the light measurement. Avoidplacingoorlamps or

suspendedlightingdirectlybelow the detector.

t

15m 12 10 8 6 4 2 0 2 4 6 8 10 12 15

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2

1

0

1

2

r

Lux

0

3

2

1