THALER VRE304-6JD, VRE304-6CS, VRE304-6CD, VRE304-6BD, VRE304-6BS Datasheet

VRE304-6
Low Cost
Precision Reference

DESCRIPTION

FEATURES

The VRE304-6 is a low cost, high precision

4.096V reference. Packaged in the industry
standard 8 pin DIP, the device is ideal for
upgrading systems that use lower performance
references.

The device provides ultrastable +4.096V output
with ±0.409 mV (.01%) initial accuracy and a
temperature coefficient of 0.6 ppm/°C. This
improvement in accuracy is made possible by a
unique, patented multipoint laser compensation
technique developed by Thaler Corporation.
Significant improvements have been made in
other performance parameters as well, including
initial accuracy, warm-up drift, line regulation, and
long-term stability, making the VRE304-6 series
the most accurate reference available in the
standard 8 pin DIP package.

For enhanced performance, the VRE304-6 has an
external trim option for users who want less than

0.01% initial error. For ultra low noise applications,
an external capacitor can be attached between the
noise reduction pin and the ground pin. A
reference ground pin is provided to eliminate
socket contact resistance errors.

5

6

7

8

VRE304-6

TOP

VIEW

1
2
3

4

N/C
+V

IN

TEMP

GND

NOISE
REDUCTION

REF. GND

V

OUT

TRIM

PIN CONFIGURATION

The VRE304-6 is recommended for use as a
reference for 14, 16, or 18 bit D/A converters
which require an external precision reference.
The device is also ideal for calibrating scale factor
on high resolution A/D converters. The VRE304­6 offers superior performance over monolithic
references.

• 4.096 V OUTPUT ± 0.409 mV (.01%)

• TEMPERATURE DRIFT: 0.6 ppm/°C

• LOW NOISE: 3µV

p-p

(0.1-10Hz)

• INDUSTRY STD PINOUT- 8 PIN DIP OR

SURFACE MOUNT PACKAGE

•EXCELLENT LINE REGULATION: 6ppm/V Typ.

• OPERATES ON +15V SUPPLY

FIGURE 1

VRE304-6DS REV. D JUN 1999

SELECTION GUIDE

Model

Temp.
Range

°C

Temp.

Coeff.

ppm/°C

VRE304-6A 0.41 0.6 0°C to +70°C
VRE304-6B 0.64 1.0 0°C to +70°C
VRE304-6C 0.82 2.0 0°C to +70°C
VRE304-6J 0.41 0.6 -40°C to +85°C
VRE304-6K 0.64 1.0 -40°C to +85°C
VRE304-6L 0.82 2.0 -40°C to +85°C

For package option add D for DIP or S for Surface Mount
to end of model number.

Initial

Error

mV

THALER CORPORATION • 2015 N. FORBES BOULEVARD • TUCSON, AZ. 85745 • [phone]

MODEL A/J B/K C/L

PARAMETER MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS

ABSOLUTE RATINGS

Power Supply +13 +15 +22 * * * * * * V
Operating Temp. (A,B,C) 0 +70 * * * * °C
Operating Temp. (J,K,L) -40 +85 * * * * °C
Storage Temperature -65 +150 * * * * °C
Short Circuit Protection Continuous * *

OUTPUT VOLTAGE

VRE304-6 4.096 * * V
Temp. Sensor Voltage 630 * * mV

OUTPUT VOLTAGE ERRORS

Initial Error 0.41 0.64 0.82 mV
Warmup Drift 1 2 3 ppm
T

min

- T

max

0.6 1.0 2.0 ppm/ °C
Long-Term Stability 6 * * ppm/1000hrs
Noise (.1-10Hz) 3 * * µVpp

OUTPUT CURRENT

Range ±10 * * mA

REGULATION

Line 6 10 * * * * ppm/V
Load 3 * * ppm/mA

OUTPUT ADJUSTMENT

Range 10 * * mV

POWER SUPPLY CURRENTS

VRE304-6 +PS 5 7 * * * * mA

VRE304-6

NOTES: *Same as A/J Models.

1. The temp. reference TC is 2.1mV/ °C

2. The specified values are without external trim.

3. The temperature coefficient is determined by the box
method using the following formula:

V

max

- V

min

T.C. = x 10

6

V

nominal

x (T

max-Tmin

)

(1)

(5)

(2)

(3)

VRE304-6DS REV. D JUN 1999

Vps =+15V, T = 25°C, RL = 10KΩ unless otherwise noted.

ELECTRICAL SPECIFICATIONS

4. The specified values are without the external
noise reduction capacitor.

5. The specified values are unloaded.

(4)