Page 1
POWERGLIDE
Anti-Calc
EN
www.t-falusa.com
Page 2
2
Page 3
SUMMARY
IMPORTANT SAFETY RECOMMENDATIONS
Important safety recommendations............................................................................................................ p. 5
Before first use .
..................................................................................................................................................................................
p. 7
PREPARATION
Which water should I use?
Filling the water tank............................................................................................................................................................... p. 8
............................................................................................................................................. p. 8
USE
Adjusting the temperature and steam
Dry ironing................................................................................................................................................................................................. p. 10
Getting more steam
Vertical steam ironing
Dampening clothing
.................................................................................................................................................................. p. 10
............................................................................................................................................................ p. 11
(Spray)........................................................................................................................................... p. 12
...................................................................................................... p. 9
While ironing
Auto-Off Function
....................................................................................................................................................................................... p. 12
(according to model)............................................................................................................. p. 12
IRON STORAGE AND MAINTENANCE
Iron storage
Cleaning the anti-calc Collector
Cleaning the anti-calc valve (once per month)
Descaling the steam chamber (3 times a year)
Cleaning the soleplate
............................................................................................................................................................................................. p. 13
............................................................................................................................ p. 14
............................................................................ p. 15
.......................................................................................... p. 16
.......................................................................................................................................................... p. 17
IS THERE A PROBLEM WITH YOUR IRON?
Problems, possible causes, solutions
.............................................................................................................. p. 18
3
Page 4
4
*
EN According to model
Page 5
5
Page 6
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the iron.
When using your iron, basic safety precautions should
always be followed, including the following:
1. Use iron only for its intended use.
2. To protect against a risk of electric shock, do not
immerse the iron in water or other liquids.
3. Always turn the iron OFF before plugging or unplugging
the iron from the electrical outlet. Never pull on the cord
to disconnect the iron from the electrical outlet; instead,
grasp the plug and pull on the plug to disconnect the
iron.
4. Do not allow cord to touch hot surfaces. Let iron cool
completely before putting away. Loop cord loosely
around iron when storing.
5. Always disconnect iron from electrical outlet when
filling with water or emptying and when not in use.
6. Do not operate iron with a damaged cord or if the iron
has been dropped or damaged. To avoid the risk of
electric shock, do not disassemble the iron. Contact our
Consumer Service Department for examination, repair
or adjustment. Incorrect reassembly can cause a risk of
electric shock when the iron is used.
7. Close supervision is necessary for any appliance being
used by or near children. Do not leave iron unattended
while connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot
water or steam. Use caution when you turn a steam iron
upside down - there may be hot water in the reservoir.
9. This appliance is only for domestic and personal use.
6
Page 7
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another highwattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, a 15 amp.
cord should be used. Cords rated for less amper may
overheat. Care should be taken to arrange the cord so
that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS
For your safety
PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE.
This appliance complies with the technical rules and standards for safety currently in force
(Electromagnetic Compatibility, Low Voltage, Environnement).
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
• During the first few uses, a harmless odour and a small amount of smoke may be given off. This has
no effect on the use of the iron and will disappear quickly.
• Warning ! The voltage of your electrical installation must correspond to that of the iron (120V or
127 V). Connecting to the wrong voltage may cause irreversible damage to the iron and will
terminate the guarantee.
• If it is absolutely essential to use an extension cable, choose a 15 amp cord.
• If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service
Centre to avoid any danger.
• The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or functions
incorrectly. Never dismantle your appliance : have it inspected by an Approved Service Centre, to
avoid any danger.
• Never immerse your iron in water !
• Do not unplug your appliance by pulling on the cord. Always unplug your appliance: before filling or
rinsing the water tank, before cleaning it, after each use.
• Never leave the appliance unattended when it is connected to the mains. Before storing the
appliance, once it is unplugged, please wait until it has cooled down (around 1 hour).
• Your appliance gives off steam, which may cause burns. Take extra care especially when you are
ironing close to the edge or on a corner of your ironing board. Never direct the steam towards
people or animals.
• Your iron should be used and placed on a flat, stable, heat-resistant surface. When you put your iron
onto its iron rest, make sure that the surface on which you put it is stable.
• This product has been designed for domestic use only. The manufacturer will accept no
responsibility and the guarantee will be terminated, if this product is used for commercial purposes,
inappropriate use or failure to comply with the instructions.
7
Page 8
BEFORE FIRST USE
Remove any labels from the soleplate before
heating the iron.
Before using the steam function in your iron
for the rst time, we recommend that you
allow the iron to operate a few moments in
a horizontal position without coming into
contact with your laundry. Keeping the iron
in this position, push the steam button
several times.
During the rst few uses, the appliance may
produce smoke, a harmless odour and a light
emission of particles. These are simply the
engineering residues from the
manufacturing process burning off. These
are harmless and will quickly disappear.
8
Page 9
PREPARATION
Max
Max
Which water should I use?
• Your appliance was designed to operate using untreated
tap water. However, it is necessary to periodically clean
the steam chamber to remove any mineral deposits.
• Do not use pure demineralised or pure distilled water,
water from clothes dryers, scented or softened water,
rain water, filtered, bottled or boiled water, water from
refrigerators, batteries or air conditioners, pure distilled
water or rain water as these may damage the iron. These
types of water contain organic waste, mineral elements
that become concentrated when heated and cause
spitting, brown staining, leaking or premature wear on
your iron
If your water is very hard, mix 50% untreated tap water
with 50% distilled water (available in hardware stores).
Filling the water tank
• Unplug the iron before filling it.
• Set the steam control to
• Lift the iron and, holding it at a slight incline, point the
soleplate up.
• Open the water tank cover.
• Fill the water tank to the mark “Max”.
• Close the water tank cover.
Warning ! Do not fill your iron through the scale
collector orifice. Do not remove the anti limescale
collector to fill the tank.
9
Page 10
USE
• Plug in the appliance.
Adjusting the temperature and steam
• Set the steam control to
• Adjust the temperature control, referring to the table
below.
FABRIC
LINEN
COTTON
WOOL
SILK/SYNTHETIC
(Polyester, Acetate, Acrylic,
Polyamide))
• The temperature indicator light turns on.
TEMPERATURE CONTROL
POSITION
Max
•••
••
•
= STEAM ZONE
OK
10
• It will turn off automatically once the soleplate
achieves the desired temperature.
Set the temperature control dial to match the type of
fabric you wish to iron. Your iron automatically and
accurately determines the exact temperature and
steam ow that are suitable, in order to guarantee the
best results.
Page 11
Your iron heats quickly: begin with fabrics that require
lower temperatures.
When ironing fabrics with most delicate bres: set the
ironing temperature for the most fragile bre.
The iron will not heat up if the thermostat control is
set to "Min".
Dry ironing
• Set the temperature according to the fabric to be
ironed.
• Set the steam control to
Max
1
sec.
• You may continue to iron when the indicator light
turns off.
Getting more steam
• Set the thermostat control to “Max” or “•••”.
• Press the turbo steam button periodically (turbo
steam).
• To avoid water dripping on the laundry, maintain an
interval of a few seconds in between each press.
11
Page 12
Vertical steam ironing
NO
Max
• Hang the item on a hanger and keep the fabric taut
with one hand. The steam is very hot; never steam iron
clothing while it is being worn—always use a hanger.
• Set the thermostat control to “Max”
1
sec.
• Press the turbo steam button (turbo steam) in pulses,
moving the iron from top to bottom.
• Hold the iron at a distance of a few centimetres from
the clothing to avoid burning delicate fabrics.
12
Page 13
NO
Dampening clothing (Spray)
• When dry or steam ironing, press repeatedly on the
spray button to moisten clothing and remove stubborn
creases.
• Ensure that there is water in the tank before using the
spray button.
While ironing
• Do not lay the iron down on the soleplate; use the heel
rest for this purpose.
OK
Auto-Off Function (according to model)
• If the iron remains unused for more than 8 minutes on
the heel rest or more than 30 seconds laid flat or on
its side, the electronic system will cut the power, the
iron will stop heating and the auto-off indicator will
begin to flash.
• To restart the iron, move it gently until the indicator
stops flashing.
13
Page 14
1H
IRON STORAGE AND
MAINTENANCE
Storing your iron
• Unplug the iron and wait for the soleplate to cool
(approx. 1 hour).
• Empty the water tank.
• Set the steam control to .
• Wrap the cord lightly around the bottom of the iron's
body. Store the iron on its heel rest.
14
Page 15
1
2
Cleaning the anti-calc Collector (3 times a year)
• Unplug the iron, empty the water tank and wait for the
soleplate to cool down (approx. 1 hour).
• Once the steam iron has completely cooled down, raise
and turn the tab of the collector to unlock it.
• Remove the collector from the iron, it contains the
limescale collected in the iron.
• To clean the collector thoroughly rinse in water to
remove the limescale inside.
• Reposition the collector in its housing and turn the tab
a quarter turn to the right in order to lock the collector
and ensure it is watertight.
Warning ! The iron does not work without the
limescale collector.
15
Page 16
Click
4
Cleaning the anti-calc valve (once per month)
• Unplug your iron and empty the water tank.
• To remove the anti-calc valve, open the water tank
cover and pull on the valve near the steam control.
h
• Soak the valve for 4 hours in a glass of water with
lemon juice.
• Rinse the valve under the tap.
• Insert the valve in place, pushing it until you hear a
click.
16
Beware!
Never touch the end of the valve.
The iron will not function without the anti-calc valve.
Page 17
Max
Max
Click
Descaling the steam chamber (3 times a year)
• Allow your iron to heat up with a full water tank while
on its heel rest and with the temperature control set
to maximum.
• Once the indicator light switches off, unplug the iron
and place it over a sink.
• Remove the anti-limescale collector.
2
min.
• Shake the iron gently in a horizontal position above
the sink until some of the water (containing the
impurities) leaks from the soleplate. You may push the
turbo steam trigger to help flush out the minerals.
• To finish the process, replace the anti-limescale
collector, pushing it until you hear a click.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
17
Page 18
NO
• Unplug your iron and, once cooled, wipe it with a soft
cloth.
• Never use chemical or abrasive products.
During the next use, turn on your iron in a horizontal
position without putting it into contact with your
laundry in order to eliminate any water containing
mineral residues that remain in the soleplate.
NO
Cleaning the soleplate
• While the soleplate is still cool, clean it with a damp
non-metallic pad.
• Never use chemical or abrasive products.
18
Page 19
IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Water is leaking
from the holes in
the soleplate.
The iron leaks at
the start of
ironing.
POSSIBLE CAUSES SOLUTIONS
You are using the steam
when the iron is not hot
enough.
You are using the turbo
steam button (turbo steam)
too often.
You have stored the iron
horizontally without
emptying the water tank or
setting the steam control to
.
You have removed the antilimescale collector to fill up
your iron.
The steam control dial is
not set to when filling
the water tank.
Wait for the indicator light to turn
off.
Wait a few seconds between each
use.
See the chapter on "Storing your
iron".
Do not remove the anti-limescale
collector when filling the iron.
Ensure that the steam control dial is
set to when filling the water tank.
A brown
discharge
coming from
the soleplate
is staining the
clothing.
The soleplate is
dirty or brown
and may stain
clothing.
You are using chemical
descaling agents.
You are not using the right
type of water.
Clothing fibres are building
up in the holes of the
soleplate and burning.
The temperature of the iron
is too hot.
You are using starch. Clean the soleplate as indicated
Your laundry has not been
rinsed sufficiently or you are
ironing a new item of
clothing before washing it.
Do not introduce a descaling agent
into the water tank.
Clean the steam chamber and see
the chapter on "What water should I
use?"
Clean the steam chamber and the
soleplate with a damp sponge.
Periodically vacuum the holes the
holes in the soleplate.
Clean the soleplate as indicated
above. Consult the table of
temperatures to adjust the
temperature.
above. Spray the starch on the reverse
side of the clothing to be ironed.
Ensure that your laundry is
sufficiently rinsed to eliminate
potential soap deposits or chemical
products on new items of clothing.
19
Page 20
IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Your iron
produces little to
no steam.
The soleplate is
scratched or
damaged.
The iron steams
once the water
tank has been
filled.
POSSIBLE CAUSES SOLUTIONS
The water tank is empty. Fill it up.
The anti-limescale collector
is dirty.
Your iron is clogged up with
limescale.
Your iron has been used for
too long in the dry ironing
function.
You have placed your iron
on a metallic iron rest or
ironed over metal zips or
fastners.
The steam control dial is
not set to
The water tank is too full. Do not exceed the max level for
.
Clean the anti-limescale collector.
Clean the anti-limescale collector
and steam chamber.
Clean the steam chamber.
Always place your iron on its heel
rest when not in use.
Do not iron over metal zips or
fastners.
Ensure that the steam control dial is
set to .
filling.
The spray does
not spray water.
The water tank is not full
enough.
Add water to the water tank.
If you have any problems or queries please call our Customer
Relations team first for expert help and advice: consult our website
for contact details: www.t-falusa.com
Environment
Environment protection first !
‹ Leave it at a local civic waste collection point.
i Your appliance contains valuable materials which can be recovered or recycled.
1800137096 - 40/15
Loading...