1. Remove any packaging, stickers or accessories inside and outside of
the appliance.
2. Place the appliance on the middle of the table,
out of the reach of children.
Place the appliance on a firm, sturdy table: do not
use the appliance on a soft or unsteady base.
Never place the appliance on an unsteady or fragile surface (glass
table, table cloths, varnished furniture…).
3. Place the grilling-stone onto heating element,
polished side (large chamfer side) facing upwards.
Never place the stone onto the warm heating
element.
Only use the stone that comes with the appliance or purchased at a
certified service centre. This stone is intended only for use with this
appliance.
Never place aluminum paper or any other part under the stone, or
between heating element and reflector.
Installation
Thank you for purchasing this T-FAL appliance. Whatever your model,
please read the instructions carefully and keep them on hand.
Unwind the cord completely.
Check that your electric installation is compatible with the power and the
voltage indicated under the appliance.
Connect the appliance to a plug with an earth connection.
Models with fixed cord : if the power supply cord is damaged, it
must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Connect the cord on the appliance (depending on
model) then plug into the wall socket.
Be cautious how you place the cord, so that it does not
get in the way of guests moving around the table.
Never plug the appliance in when not in use.
Do not leave the appliance switched on while unattended.
Connection and pre-heating
T-FAL reserves the right to modify the characteristics or components of its products
at any time, in the interests of consumers.