TFA 35.1042 Instruction Manual

Hanging Hole
LCD Display
Battery cover
Detachable stand
Function keys
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with indoor temperature and humidity display and weather forecast.
It is further featuring a DCF-77 radio controlled clock. With three easy to use function keys, this innovative product is ideal for use in the home or office.
FEATURES
DCF-77 Radio controlled time with manual setting option
24 hour time display
Weather forecast with weather tendency indicator
Indoor temperature display in °C with MIN/MAX recordings
Indoor humidity display in RH%
MIN/MAX recordings reset
Wall mounting or table standing
SETTING UP:
1. Insert the batteries into the Weather Station (see “How to install and replace batteries in the Weather Station” below). Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor temperature and humidity, the time as - : - - and the weather icon sun with clouds will be displayed. If the indoor temperature and humidity are not displayed after 15 seconds, remove the batteries and wait for at least 10 seconds before reinserting them.
2. Once the indoor data have been displayed on the Weather Station, the DCF-77 time code reception is automatically started. This takes typically between 3-5 minutes in good conditions.
3. If after 10 minutes the DCF time has not been received, use the SET key to manually enter a time initially. The clock will automatically attempt each hour to receive the DCF time. When this is successful, the received time will override the manually set time. (Please refer also to notes on “Radio controlled time” and “Manual time
setting”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom centre of the battery compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
MIN/MAX key
BATTERY CHANGE:
It is recommended to replace the batteries in the unit on an annual basis to ensure optimum accuracy of these units.
Please participate in the preservation of the environment. Return used batteries to an authorised depot.
FUNCTION KEYS: Weather Station:
The Weather Station has three easy to use function keys located on the front:
SET key (Setting)
Enter the manual time setting mode
Switch to minute digit setting
Exit time setting mode
+ key
Change the digits in time setting mode
MIN/MAX key
Toggle between the current / maximum/ minimum indoor temperatures
Press for around 2 seconds to reset the indoor maximum and minimum temperature records (will reset all
temperatures to current level)
LCD SCREEN AND SETTINGS
For better distinctness the LCD screen is split into 3 sections displaying the informations for weather forecast, time, indoor temperature and humidity.
LCD1- WEATHER FORECAST AND TENDENCY THE WEATHER FORECASTING ICONS
There are 3 weather icons on the first section of the LCD which can be displayed in any of the following combinations:
Weather forecast icon
DCF Tower Icon (for time reception)
Weather tendency indicator
Time
Indoor Temperature in °C
Indoor relative humidity in RH%
SET key
+ key
Loading...
+ 4 hidden pages