TFA 30.3016.01.IT, 30.3016.13.IT Instruction Manual

WIRELESS 868 MHz TEMPERATURE STATION

Instruction Manual

Thank you for choosing this wireless temperature station from TFA.

BEFORE YOU USE IT

Please be sure to read the instruction manual carefully.

This information will help you to familiarise yourself with your new device, learn all of its
functions and parts, find out important details about its first use and how to operate it, and get
advice in the event of faults.
Following the instruction manual for use will prevent damage to the device and loss of your
statutory rights arising from defects due to incorrect use.

We shall not be liable for any damage occurring as a result of not following these
instructions.

Cat. No. 30.3016.01.IT / 30.3016.13.IT

32

Please take particular note of the safety advice!
Please look after this manual for future reference.

SCOPE OF SUPPLY:

• Temperature station (basic unit)

• Outdoor transmitter

• Instruction manual

FIELD OF OPERATION AND ALL OF THE BENEFITS OF YOUR NEW
TEMPERATURE STATION AT A GLANCE:

• Time display (hour, minutes, seconds)

• 12/24 hour time format

• Calendar display (month, date, weekday)

• Time zone option ±12 hours

• Temperature display in Celsius (°C) or Fahrenheit (°F) selectable

33

• Indoor and outdoor temperature display with MIN/MAX records

• All MIN/MAX recordings can be reset

• Wireless transmission at 868 MHz

• Signal reception intervals at 4-second

• Low battery indicator

• Table standing or wall mountable

FOR YOUR SAFETY:

• The product is exclusively intended for the field of application described above. The
product should only be used as described within these instructions.

• Unauthorised repairs, modifications or changes to the product are prohibited.

• The product is not to be used for medical purpose or for public information, but is

intended solely for home use.

34

Caution!
Risk of injury:

• Keep this instrument and the batteries out of reach of children.

• Batteries must not be thrown into the fire, short-circuited, taken apart or recharged. Risk

• Batteries contain harmful acids. Low batteries should be changed as soon as possible to

! Important information on product safety!

• Do not expose the instrument to extreme temperatures, vibration or shock.

• The outdoor transmitter is protected against splash water, but is not watertight. Choose a

of explosion!

prevent damage caused by a leaking battery. Never use a combination of old and new
batteries together or batteries of different types. Wear chemical-resistant protective
gloves and glasses when handling leaked batteries.

shady and dry position for the transmitter.

35

LCD

display

ELEMENTS

The temperature station

SET key

MIN/MAX/+ key

36

Hanging hole

Battery
compartment

Stand

The outdoor temperature transmitter

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER

The temperature transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the
batteries, please follow the steps below:

• Remote transmission of outdoor temperature to temperature
station by 868MHz

• Weather-resistant casing

• Wall mounting case

• Mount in a sheltered place. Avoid direct rain and sunshine

37

1. Remove the battery compartment cover at the back of the transmitter.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION

The temperature station uses 2 x AA, IEC LR6, 1.5V batteries. To
install and replace the batteries, please follow the steps below:

1. Remove the cover at the back of the temperature station.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

38

Battery replacement

• Replace the batteries when the battery symbol of the temperature station appears near
the indoor temperature display.

• When the batteries of the transmitter are used up, the low battery icon appears near the
outdoor temperature display.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the
setting up procedures. This is because a security code is assigned by the transmitter at start-up
and this code must be received and stored by the Temperature station in the first 3 minutes of
power being supplied to it.

SETTING UP:

Note: This temperature station receives only one outdoor transmitter.

1. First, insert the batteries into the transmitter. (see “Install and replace batteries in the
temperature transmitter“).

39

2. Immediately after and within 30 seconds, insert the batteries into temperature station
(see “Install and replace batteries in the temperature station”). Once the batteries
are in place, all segments of the LCD will light up briefly. Following the time as 0:00 will
be displayed and indoor temperature. If these are not displayed after 60 seconds,
remove the batteries and wait for at least 10 seconds before reinserting them.

3. After inserting the batteries, the temperature station will start receiving data from the
transmitter. The outdoor temperature and the signal reception icon should then
displayed on the Temperature station. If this does not happen after 3 minutes, the
batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good
conditions be a distance no more than 100 meters between the final position of the
temperature station and the transmitter (see notes on “Mounting” and “868 MHz
reception”).

be

40