Texsport 01112 User Manual

INSTRUCTIONS

Item 01112

Boulder Creek Vestibule Tent

hank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent

t least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new

a tent and that it will give you many years of camping pleasure.

Do not apply excessive force to this product.

PARTS LIST:

A......Tent skin

B......1 fly pole

C......4 sets of tent poles

D......Stakes, guy ropes and clews

NOTE:

repare your camp site by removing all sharp

tones, twigs, etc. The site should be flat and have

s no depressions that could collect rain water.

STEP 1 - Spread out tent skin. STEP 2 - Assemble the tent poles

STEP 4 - Insert the pin and ring into the tent poles.

STEP 5 - Your tent poles should cross at the sides.

STEP 3 - Your poles should form double X as shown above.

STEP 6 - Your roof poles should form 2 large X’s.

STEP 7 - Secure skin by snapping all speed clips onto the outer most tent pole.

STEP 8 - Stake down at the ring.

STEP 9 - Spread out the fly bottom side up.

STEP 10 - Assemble the fly pole (B) and push through the sleeve.

TEP 11 - Secure pole to fly with

S attached velcro.

STEP 12 - Drape assembled fly over tent and insert the pin and rings into the fly pole.

TEP 12 - Secure fly to tent with

S attached buckels. Pull or loosen web straps to adjust tension.

STEP 15 - It is recommended in windy weather to secure your tent with guy ropes. Insert the guy rope into clew as shown above.

TEP 13 - Stake out the vestibule.

STEP 16 - Tie the other end of the guy rope to the tabs on the fly.

TEP 14 - Stake out the mud mat

S at the 2 corners.

STEP 17 - Loosen the guy rope as shown to wrap around a stake.

STEP 18 - Stake down the guy rope.

STEP 19 - Adjust the tension on the guy rope by sliding the clew up or down.

Specifications and Main Features