texet PB2600 Instruction Manual

PB2600 Power Bank Instruction Manual
Thank you for purchasing this TEXET Power Bank, PB2600, before operating the Power Bank please read this Instruction Manual carefully and keep for future reference.
How to charge the Power Bank.
The Power Bank will take approx.4- 6 hours to fully charge depending on the power source you are using to charge the Power Bank. If you are using a computer/laptop it will take longer as the maximum output load from the USB 2.0 ports is 500ma.
The Power Bank can be charged directly through the mains socket outlet using a TEXET USB Mains Charger.
Fully charge the Power Bank before using.
How to charge your Mobile device.
Plug the USB end of the Cable supplied, into the USB out port located at the bottom the Power Bank. Plug the
Micro USB end of the cable into the Micro USB port of your mobile device. Switch on the Power Bank by pressing
the Power Button, (a Blue LED light will come on), your mobile device will automatically start being charged.
To switch the Power Bank off press the Power On/Off button.
Once all the power has been used, the Blue LED will switch off indicating the Power Bank needs re-charging.
The Power Bank is fitted with overload, discharge and short circuit protection.
Accessories supplied.
1 x USB to Micro USB Cable.
Specification.
Battery Capacity: 2600mah Mobile Phone Battery Capacities: Micro USB Input: 5V 1000ma iPhone6 – 1810mah iPhone 6plus – 2915mah USB Output: 5V 1000ma iPhone 5/5s – 1440/1560mah Nexus 5 – 2300mah Dimensions : 95 x 22 x 22mm Galaxy 5S – 2800mah Sony Z3 Xperia - 2300mah Weight: 75gms. HTC One M8 – 2600mah One plus One - 2800mah
Waste Electrical products/batteries should not be disposed of with normal Household waste. Facilities exist, for your nearest facilities, see www.recycle-more.co.uk or in-store for details.
Made in China. www.texet.com
TEXET is a registered Trademark of The Hira Company
Customer Services Helpline: +44 (0) 161 214 0700
email: technicalsupport@texet.com
Loading...