texet PB2000 Instruction Manual

PB2000 Powerbank Instruction Manual
Thank you for purchasing this TEXET Powerbank, PB2000, before operating the Powerbank please read this Instruction Manual carefully and keep for future reference.
How to charge the Powerbank.
The Powerbank will take approx. 4-5 hours to fully charge depending on the power source you are using to charge the Powerbank, Whilst charging a red LED will show, once fully charged it will switch off. If you are using a computer/laptop to charge the Powerbank it will take longer to charge as the maximum output load from a USB 2.0 port is 500ma.
The Powerbank can be charged directly through the mains socket outlet using a TEXET USB Mains Charger.
Fully charge the Powerbank before using.
How to charge your Mobile device.
Plug the USB end of the cable supplied, into the USB out port located at the top of the Powerbank. Plug the Micro
USB end of the cable into the Micro USB port of your mobile device, a blue LED light will come on and your mobile
device will automatically start to be charged.
Once all the power has been used, the blue LED will switch off indicating the Powerbank needs re-charging.
The Powerbank is fitted with overload, discharge and short circuit protection.
The Powerbank can charge devices that have charging ports other than Micro USB, ie 8 and 30 pin ports and USB C ports, but you will need the relevant cable, (these cables are not supplied).
Accessories supplied.
1 x USB to Micro USB Cable.
Specification.
Battery Capacity: 2000mAh Micro USB Input: 5V 1000mAh USB Output: 5V 1000mAh Dimensions : 97 x 26 x 22mm Weight: 60gms.
Waste Electrical products/batteries should not be disposed of with normal Household waste. Facilities exist, for your nearest facilities, see www.recycle-more.co.uk or in-store for details.
Made in China. www.texet.com
TEXET is a registered Trademark of The Hira Company
Customer Services Helpline: +44 (0) 161 214 0700
email: technicalsupport@texet.com
Loading...