1
INTRODUCTION
Thank you for choosing our TEXET digital picture frame (DPV-114). A mini digital photo frame is used
to view personal photographs making them a perfect gift for friends and family.
SPECIFICATION
1.5 inch TFT LCD display.
Slide show or manual play.
Supports JPG/JPEG, BMP files.
Calendar, clock and alarm clock function.
PC connectivity (Compatible with all Windows and Mac PC’s)
Powered supplied by rechargeable lithium batteries.
PACK CONTENTS
1 x Photo Frame
1 x User Manual
1 x USB Cable
DPF Manual
DPV-114
2
HOW TO OPERATE YOUR DIGITAL PICTURE FRAME
There are three main operation keys:
Menu/Play “M”, Up key “►” and Down key “◄” (Please note that the “Reset” key is located
inside the device. It can be reset by inserting pin / pen)
Press “M” to switch the digital picture frame on/off and to access the main menu. Press “M” key and
hold it for 3 seconds to view pictures. When viewing your photos you will be directed back to the main
menu by pressing the “M” key. To switch it off, hold down “M” key until the devices shuts down.
MAIN MENU SET UP AND FEATURES
USB CONNECT
Select “USB CONNECT” from the Main Menu
Press ◄ or ► key to select “Yes” or “No”. To enter PC connection select
“Yes” this will enable you to update your photos through the auto-run
software. Select “No” to exit.
CLOCK
Select “CLOCK” from the Main Menu to configure clock, alarm and calendar display.
Press ◄ or ► key to setup settings and “M” key to save setting and exit.
(Please note that there will be real-time update when you connect to your PC through the USB
cable provided)
SLIDE SHOW
Select “SLIDE SHOW” from the Main Menu to adjust the speed that you view your pictures.
Press ◄ or ► key to switch on slide show and setup viewing time. Select
between “00-15” seconds and press “M” key to save setting and to exit.
MAIN MENU
USB CONNECT
CLOCK
SLIDE SHOW
AUTO SHUT DOWN
BACK LIGHT
DELETE
OFF
EXIT
ON
OFF
CANCEL
DISPLAY CLOCK
ANALOG CLOCK
SET CLOCK
ALARM CLOCK
CANCEL
USB CONNECT
YES
NO
0
20
40
60
80
100
第一季度 第三季度
东部
西部
北部
3
AUTO SHUT DOWN
Select “AUTO SHUT DOWN” from the Main Menu to programme the device to automatically switch
itself off if not in use.
Press ◄ or ► key to setup AUTO SHUT DOWN. Select from “1-30” minutes
and press “M” key to save setting and to exit.
BACKLIGHT
Select “BACKLIGHT” from the Main Menu to amend the brightness of the backlight.
Press ◄ or ► key to setup backlight value. “1-21” are the effective levels,
and press “M” key to save setting and to exit.
DELETE
Select “DELETE” from the Main Menu to delete pictures from the device.
Press ◄ or ► key to select picture to be deleted. Select “Yes” to delete, No
to return to viewing images and Cancel to return to previous menu. Press
“M” key to save setting and exit.
Please note that for all changes to take effect you must press “M” key within 5 seconds
otherwise the device will not save the settings and the factory default settings will still remain.
OFF
Select “OFF” from the Main Menu to switch the device off.
EXIT
Select “EXIT” from the Main Menu to exit and return to viewing images.
For further information on the TEXET range, please refer to www.texet.com
ON
OFF
CANCEL
BACKLIGHT 18
DELETE ONE
DELETE ALL
CANCEL
Loading...