Texas Instruments UC3572N, UC3572DTR, UC3572D, UC2572DTR, UC2572N Datasheet

UC1572
UC2572
UC3572

DESCRIPTION

The UC3572 is a negative output flyback pulse width modulator which con­verts a positive input voltage to a regulated negative output voltage. The
chip is optimized for use in a single inductor negative flyback switching
converter employing an external PMOS switch. The block diagram consists
of a precision reference, an error amplifier configured for voltage mode op­eration, an oscillator, a PWM comparator with latching logic, and a 0.5A
peak gate driver. The UC3572 includes an undervoltage lockout circuit to
insure sufficient input supply voltage is present before any switching activ­ity can occur, and a pulse-by-pulse current limit. Output current can be
sensed and limited to a user determined maximum value. The UVLO circuit
turns the chip off when the input voltage is below the UVLO threshold. In
addition, a sleep comparator interfaces to the UVLO circuit to turn the chip
off. This reduces the supply current to only 50µA, making the UC3572 ideal
for battery powered applications.

Negative Output Flyback Pulse Width Modulator

FEATURES

• Simple Single Inductor Flyback PWM
for Negative Voltage Generation

• Drives External PMOS Switch

• Contains UVLO Circuit

• Includes Pulse-by-Pulse Current Limit

• Low 50µA Sleep Mode Current

03/99

BLOCK DIAGRAM

UDG-94094-2

2

UC1572
UC2572
UC3572

ABSOLUTE MAXIMUM RATINGS

VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V

EAINV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.6V to VCC

IEAOUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA

RAMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 4V

CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VCC

Iout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.7A to 0.7A

I3VREF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-15mA

Storage Temperature . . . . . . . . . . . . . . . . . . . -65°C to +150°C

Junction Temperature . . . . . . . . . . . . . . . . . . . -65°C to +150°C

Lead Temperature (Soldering, 10 sec.). . . . . . . . . . . . . +300°C

Currents are positive into, negative out of the specified
terminal. Consult Packaging Section of Databook for thermal
limitations and considerations of packages.

DIL-8, SOIC-8 (TOP VIEW)
D, N or J Packages

CONNECTION DIAGRAM

TEMPERATURE RANGE PACKAGE

UC1572 –55°C to +125°C J
UC2572 –40°C to +85°C D, N or J
UC3572 0°C to +70°C D or N

ORDERING INFORMATION

ELECTRICAL CHARACTERISTICS:

Unless otherwise specified, VCC = 5V, CT = 680pF, TA=T

J

.

PARAMETER TEST CONDITIONS MIN TYP MAX UNITS

Reference Section

3VREF 2.94 3 3.06 V
Line Regulation VCC = 4.75 to 30V 1 10 mV
Load Regulation I

3VREF = 0V to –5mA 1 10 mV

Oscillator Section

Frequency VCC = 5V to 30V 85 100 115 kHz

Error Amp Section

EAINV EAOUT = 2V –10 0 10 mV

I

EANV = –1mA –0.2 –0.9 V

IEAINV EAOUT = 2V –0.2 –1.0 µA
AVOL EAOUT = 0.5V to 3V 65 90 dB
EAOUT High EAINV = –100mV 3.6 4 4.4 V
EAOUT Low EAINV = 100mV 0.1 0.2 V
IEAOUT EAINV = –100mV, EAOUT = 2V –350 –500 µA

EAINV = 100mV, EAOUT = 2V 7 20 mA

Unity Gain Bandwidth TJ = 25°C, F = 10kHz 0.6 1 MHz

Current Sense Comparator Section

Threshold 0.195 0.215 0.235 V
Input Bias Current CS = 0 –0.4 –1 µA
CS Propogation Delay 300 nS

Gate Drive Output Section

OUT High Saturation I

OUT = 0 0 0.3 V

IOUT = –10mA 0.7 1.5 V
IOUT = –100mA 1.5 2.5 V

OUT Low Saturation IOUT = 10mA 0.1 0.4 V

IOUT = 100mA 1.5 2.2 V

Rise Time TJ = 25°C, CLOAD = 1nF + 3.3 Ohms 30 80 nS