Texas Instruments TMS320C6472, TMDXEVM6472 User Manual

Getting Started:

The EVMC6472 ships with a Power On self Test (POST) flashed
in to I2C EEPROM. The POST will be automatically executed
when the board is powered ON. POST will perform memory
test and EMAC internal loopback test. At 'power on' state the
user LEDs will glow. The LEDs will continue to glow while the
POST utility is being copied from EEPROM to IRAM. User LEDs
will turn OFF once the POST is copied to IRAM.
User LED-1 and user LED-2 will blink to indicate successful
executions of memory and EMAC internal loopback tests
respectively. These LEDs will turn OFF after completion of the
tests.

Please refer EVM User Guide for software installation and
other details.

Helpful Hints:

• Plug in all the cables before turning the EVM ON to
ensure proper grounding.

• Do not unnecessarily flex the boards, while inserting
cables. Excessive flexing can break the PCB traces.

Online Documentation

Most of the information on EVM6472 is available online. Some
of the most commonly used resources are mentioned below:

EVM6472 Information:

http://www.einfochips.com/TI-TMS320C6472-EVM.php

This link contains:

• Hardware & software details

• User Guide

• Technical Reference Manual

• TMS320C6472 Datasheet

• Frequently Asked Questions (FAQ)

C6472 DSP Information:

http://focus.ti.com/docs/prod/folders/print/tms320c6472.html

TI Worldwide Technical Support

Internet

TI Semiconductor Product Information Center Home Page
support.ti.com
TI Semiconductor KnowledgeBase Home page
support.ti.com/sc/knowledgebase

Product Information Centers

Americas

Phone [phone] Fax [phone]
Internet/Email support.ti.com/sc/pic/americas.htm

Europe, Middle East and Africa

Phone
European Free Call 00800-ASK-TEXAS
(00800 275 83927)
International [phone]
Russian Support [phone]

Note: The European Free Call (Toll Free) number is not active in all
countries. If you have technical difficulty calling the free call
number, please use the international number above.
Fax +(49) (0) 8161 80 2045
Internet support.ti.com/sc/pic/euro.htm

Japan

Fax
International [phone] Domestic 0120-81-0036
Internet/Email
International support.ti.com/sc/pic/japan.htm
Domestic www.tij.co.jp/pic

Asia

Phone
International
Domestic Toll-Free-Number Toll-Free-Number
Australia Malaysia
China New Zealand
Hong Kong Philippines
India Singapore
Indonesia Taiwan
Korea Thailand
Fax Email [e-mail]
[e-mail]
Internet support.ti.com/sc/pic/asia.htm

Important Notice: The products and services of Texas Instruments
Incorporated and its subsidiaries described herein are sold subject to TI's
standard terms and conditions of sale. Customers are advised to obtain the
most current and complete information about TI products and services
before placing orders. TI assumes no liability for applications assistance,
customer's applications or product designs, software performance, or
infringement of patents. The publication of information regarding any other
company's products or services does not constitute TI's approval, warranty or
endorsement thereof.

The floating bar is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners

[phone]-

800-999-084
800-820-8682
800-96-5941
1-800-425-7888
001-803-8861-1006
080-551-2804
[phone]

1-800-80-3973

0800-446-934

1-800-765-7404

800-886-1028

0800-006800

001-800-886-0010

TMDXEVM6472

TMS320C6472 Evaluation Module
Quick Setup Guide

Boot Mode/Configuration

Dual Giga Ethernet

RS232­Serial

USB mini-B

On-Board
Embedded
Emulation

Cold
Reset

Settings

User
LEDs

Warm
Reset

User
Switches

JTAG­FPGA

NAND Flash
128 MB

LEDs-I2C

FPGA

JTAG-DSP

HPI - DC

C6472
(6 Core DSP)

DDR2 RAM
256 MB

AMC­Type B+

12V DC

©2009 Texas Instruments Incorporated eInfochips Literature: EVM6472_QSG_0.2

w w w . e i n f o c h i p s . c o m

C6472 Evaluation Module

4

The TMDXEVM6472 (Evaluation Module) kit includes:

TMS320C6472 Evaluation Module (Printed circuit board
assembly)
Power supply and power cord
USB Cable for on-board JTAG emulation
Ethernet cable
Software (DVD) and documentation

1

2

3

1a The EVMC6472 is also shipped

with an Out-Of-Box Demo application
flashed into NAND. This is a network
based application which starts an HTTP
server and a TELNET server with the
following static IP address:

192.168.2.100. The application enables
the following:
User switch 1 OFF - Static IP set as

192.168.2.100 (recommended)
User switch 1 ON - Obtains IP address
from DHCP server
In order to connect to the board, the
test PC should be configured with
static IP address: 192.168.2.101. Once
the User LEDs are OFF (indicating
successful NAND boot) the user can
access the following URL through a
browser to view Out-Of-Box demo:
http://192.168.2.100

3

Connect Ethernet switch /
router / PC to the lower Giga
Ethernet port (J3) of EVM6472
board using an Ethernet
cable to access EMAC0. Use
upper Giga Ethernet port of
J3 to access EMAC1.

Ensure EVM

configuration switches

are set as shown.

1

©2009 Texas Instruments Incorporated eInfochips Literature: EVM6472_QSG_0.2 ©2009 Texas Instruments Incorporated eInfochips Literature: EVM6472_QSG_0.2

1a

Out-Of-Box

To run
demo through
NAND, configure
the switches as
shown above.

2

Connect the USB miniB
cable to J7 plug for on
board embedded
emulation, as shown in
figure. (For use with CCS
debugger only)

4

Connect the 12V DC
power adapter
(supplied with the kit) to
power jack (J6).