Texas Instruments TLV2462CD, TLV2462CDGK, TLV2465AID, TLV2464IPWR, TLV2464IPW Datasheet

DEVICE

NO. OF Ch

SHUTDOWN

Selecti
(

OU060)

(Lit# SLOU060)

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

D

Input Common-Mode Range Exceeds Both
Supply Rails ... – 0.2V to V

D

Gain Bandwidth Product . . . 6.4MHz

D

Supply Current ...500µA/channel

D

Input Offset Voltage . . . 100 µV

D

Input Noise Voltage ...11nV/√Hz

D

Rail-to-Rail Output Swing

D

Slew Rate . . . 1.6 V/µs

D

±90mA Output Drive Capability

D

Micropower Shutdown Mode

DD+

+ 0.2V

OUT

GND

IN+

TLV2460

DBV PACKAGE

(TOP VIEW)

1

6

2

5

3

4

V

DD+

SHDN

IN–

(TLV2460/3/5) . . . 0.3 µA/channel

D

Available in 5- or 6-pin SOT23 and
8- or 10-Pin MSOP

D

Characterized From T

D

Universal Op Amp EVM

= –40°C to 125°C

A

description

The TLV246x is a family of low-power rail-to-rail input/output operational amplifiers specifically designed for
portable applications. The input common-mode voltage range extends beyond the supply rails for maximum
dynamic range in low-voltage systems. The amplifier output has rail-to-rail performance with high-output-drive
capability, solving one of the limitations of older rail-to-rail input/output operational amplifiers. This rail-to-rail
dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.

The operational amplifier has 6.4 MHz of bandwidth and 1.6 V/µs of slew rate with only 500 µA of supply current,
providing good ac performance with low power consumption. Three members of the family offer a shutdown
terminal, which places the amplifier in an ultra-low supply current mode (I

= 0.3 µA/ch). While in shutdown,

DD

the operational-amplifier output is placed in a high-impedance state. DC applications are also well served with
an input noise voltage of 11 nV/√Hz and input offset voltage of 100 µV.

This family is available in the low-profile SOT23, MSOP, and TSSOP packages. The TLV2460 is the first
rail-to-rail input/output operational amplifier with shutdown available in the 6-pin SOT23, making it perfect for
high-density circuits. The family is specified over an expanded temperature range (T

= –40°C to 125°C) for

A

use in industrial control and automotive systems.

FAMILY PACKAGE TABLE

PACKAGE TYPES

PDIP SOIC SOT-23 TSSOP MSOP

TLV2460 1 8 8 6 — — Yes
TLV2461 1 8 8 5 — — —
TLV2462 2 8 8 — — 8 —
TLV2463 2 14 14 — — 10 Yes
TLV2464 4 14 14 — 14 — —
TLV2465 4 16 16 — 16 — Yes

UNIVERSAL

EVM BOARD

Refer to the EVM

on Guide

Lit# SL

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

This document contains information on products in more than one phase
of development. The status of each device is indicated on the page(s)
specifying its electrical characteristics.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Copyright  1999, Texas Instruments Incorporated

1

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

V

CHIP FORM

‡

40°C to 125°C

V

CHIP FORM

‡

V

CHIP FORM

‡

6 Pin

SOT-23

5 Pin

8 Pin

MSOP

10 Pin

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TLV2460 and TLV2461 AVAILABLE OPTIONS

max

T

A

0°C to 70°C 2000 µV

°

-

†

This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV2460CDR).

‡

Chip forms are tested at TA = 25°C only.

T

A

0°C to

70°C

–40°C to

125°C

†

This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV2462CDR).

‡

Chip forms are tested at TA = 25°C only.

AT 25°C

2000 µV

2000 µV

1500 µV

IO

max

°

SMALL OUTLINE

IO

AT 25°C

2000 µV

1500 µV

(D)

TLV2462CD
TLV2463CD

TLV2462ID
TLV2463ID

TLV2462AID
TLV2463AID

SMALL OUTLINE

(D)

TLV2460CD
TLV2461CD

TLV2460ID
TLV2461ID

TLV2460AID
TLV2461AID

TLV2462 and TLV2463 AVAILABLE OPTIONS

†

MSOP
(DGK)

TLV2462CDGK

—

TLV2462IDGK

—
—

—

PACKAGED DEVICES

SOT-23

(DBV)

TLV2460CDBV
TLV2461CDBV

TLV2460IDBV
TLV2461IDBV

—
—

PACKAGED DEVICES

†

MSOP

(DGS)

—

TLV2463CDGS—TLV2463CN

—

TLV2463IDGS

—
—

†

PLASTIC DIP

TLV2463IN

TLV2463AIN

PLASTIC DIP

TLV2460CP
TLV2461CP

TLV2460IP
TLV2461IP

TLV2460AIP
TLV2461AIP

(N)

—

—

(P)

TLV2460Y
TLV2461Y

PLASTIC DIP

(P)

TLV2462CP

—

TLV2462IP

—

TLV2462AIP

—

(Y)

—
—

—
—

(Y)

TLV2462Y
TLV2463Y

—
—

—
—

TLV2464 and TLV2465 AVAILABLE OPTIONS

max

T

A

0°C to 70°C 2000 µV

–40°C to 125°C 2000 µV

–40°C to 125°C 1500 µV

†

This package is available taped and reeled. To order this packaging option, add an R suffix to the part number
(e.g., TLV2464CDR).

‡

Chip forms are tested at TA = 25°C only.

DEVICE TYPE

IO

AT 25°C

SMALL OUTLINE

(D)

TLV2464CD
TLV2465CD

TLV2464ID
TLV2465ID

TLV2464AID
TLV2465AID

SOT-23 AND MSOP DEVICE SYMBOLS

NO. OF

TERMINALS

PACKAGED DEVICES

PLASTIC DIP

(N)

TLV2464CN
TLV2465CN

TLV2464IN
TLV2465IN

TLV2464AIN
TLV2465AIN

PACKAGE NAME SYMBOL

TLV2460CDBV VAOC
TLV2460IDBV VAOI
TLV2461CDBV VAPC
TLV2461IDBV VAPI
TLV2462CDGK xxTIAAI
TLV2462IDGK xxTIAAJ
TLV2463CDGS xxTIAAK
TLV2463IDGS xxTIAAL

TSSOP

(PW)

TLV2464CPW
TLV2465CPW

TLV2464IPW
TLV2465IPW

TLV2464AIPW
TLV2465AIPW

(Y)

TLV2464Y
TLV2465Y

—
—

—
—

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TLV246x PACKAGE PINOUTS

OUT

GND

IN+

D OR P PACKAGE

NC

IN–

IN+

GND

TLV2460

DBV PACKAGE

(TOP VIEW)

1

6

2

5

3

4

TLV2461

(TOP VIEW)

1

8

2

7

3

6

4

5

V

DD+

SHDN

IN–

NC
V

DD

OUT
NC

TLV2461

DBV PACKAGE

(TOP VIEW)

OUT

1

V

5

DD+

NC

IN–

GND

IN+

D, DGK, OR P PACKAGE

1OUT

+

1IN–
1IN+
GND

2

3

4

TLV2462

(TOP VIEW)

1

8

2

7

3

6

4

5

IN–

V

DD

2OUT
2IN–
2IN+

IN+

GND

+

1OUT

1IN–

1IN+

GND

1SHDN

TLV2460

D OR P PACKAGE

(TOP VIEW)

1
2
3
4

DGS PACKAGE

(TOP VIEW)

1
2
3
4
5

8
7
6
5

TLV2463

10

9
8
7
6

SHDN
VDD+
OUT
NC

VDD+
2OUT
2IN–
2IN+
2SHDN

TLV2463

D OR N PACKAGE

(TOP VIEW)

1OUT

1IN–
1IN+
GND

NC

1SHDN

NC

NC – No internal connection

1

14

2

13

3

12

4

11

5

10
6
7

D, N, OR PWP PACKAGE

V

+

DD

2OUT
2IN–
2IN+
NC
2SHDN

9
8

NC

1OUT

1IN–

1IN+

V

DD

2IN+

2IN–

2OUT

+

TLV2464

(TOP VIEW)

1

14

2

13

3

12

4

11

5

10
6
7

9
8

4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT

D, N, OR PWP PACKAGE

1OUT

1IN–

1IN+

V

+

DD

2IN+

2IN–

2OUT

1/2SHDN

TLV2465

(TOP VIEW)

1

16

2

15

3

14

4

13

5

12

6

11

7

10

8

9

4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
3/4SHDN

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

3

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

PACKAGE

JC

JA

A

Suppl

oltage, V

V

Operating free-air temperature, T

°C

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

†

Supply voltage, VDD (see Note 1) 6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID V
Input current, I

(any input) ± 200 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I

DD

– 0.2 V to VDD + 0.2 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output current, IO ± 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Total input current, II (into V

) 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DD+

Total output current, IO (out of GND) 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, T

: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A

I suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, T

–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

stg

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: All voltage values, except differential voltages, are with respect to GND.

DISSIPATION RATING TABLE

Θ

(°C/W)

D (8) 38.3 176 725 mW
D (14) 26.9 122.6 725 mW
D (16) 25.7 114.7 725 mW

DBV (5) 55 324.1 437 mW
DBV (6) 55 294.3 437 mW

DGK 54.23 259.96 424 mW

DGS 54.1 257.71 424 mW
N (14) 32 78 1150 mW
N (16) 32 78 1150 mW

P 41 104 1000 mW

PW (14) 29.3 173.6 700 mW
PW (16) 28.7 161.4 700 mW

Θ

(°C/W)

T

≤ 25°C

POWER RATING

recommended operating conditions

pp

y v

Common-mode input voltage range, V

p

4

DD

MIN MAX UNIT

Single supply 2.7 6
Split supply ±1.35 ±3

ICR

p

A

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

C-suffix 0 70
I-suffix

GND V

DD+

–40 125

V

°

PARAMETER

TEST CONDITIONS

T

†

UNIT

VIOInput offset voltage (TLV246x)

V

V

VIOInput offset voltage (TLV246xA)

O

V

2µV/°C

V

DD

IC

,

R

Ω

V

Common-mode input voltage range

V

I

mA

VOHHigh-level output voltage

V

I

mA

V

I

mA

VOLLow-level output voltage

V

V

I

mA

Sourcing

IOSShort-circuit output current

mA

Sinking

A

gg g

R

10 kΩ

dB

R

S

50 Ω

DD

,

IC DD

,

k

ygj

dB

DD

,

IC DD

,

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)

A

p

= ±1.5 V,

p

α

I

I

I

r
c
z

CMRR Common-mode rejection ratio

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Temperature coefficient of input offset

VIO

voltage

Input offset current

IO

Input bias current

IB

ICR

Output current 25°C ±30 mA

O

Large-signal differential voltage

VD

amplification
Differential input resistance 25°C 10

i(d)

Common-mode input capacitance f = 10 kHz 25°C 7 pF

i(c)

Closed-loop output impedance f = 100 kHz, AV = 10 25°C 33

o

Supply voltage rejection ratio

SVR

(∆VDD /∆VIO)

p

p

p

p

DD

VIC = 0,

= ±1.5 V,
VIC = 0,
VO = 0,

= 50

S

CMRR > 66 dB RS = 50 Ω 25°C

CMRR > 60 dB RS = 50 Ω Full range

= –2.5

OH

= –10

OH

= 1.5 V,

IC

= 1.5 V,

IC

=

L

V

= –0.2 V to 3.2 V,

ICR

=

V

= 2.7 V to 6 V, V
No load

= 3 V to 5 V, V

V
No load

VO = 0,
RS = 50 Ω

TLV246xC Full range 20
TLV246xI Full range 75

TLV246xC Full range 25
TLV246xI Full range 75

= 2.5

OL

= 10

OL

TLV246xC Full range 64
TLV246xI Full range 60

= V

/2,

= V

/2,

25°C 100 2000

Full range 2200

25°C

Full range

25°C 2.8 7

25°C 4.4 14

25°C 2.9

Full range 2.8

25°C 2.7

Full range 2.5

25°C 0.1

Full range 0.2

25°C 0.3

Full range 0.5

25°C 50

Full range 20

25°C 40

Full range 20

25°C 90 105

Full range 89

25°C 66 80

25°C 80 85

Full range 75

25°C 85 95

Full range 80

TLV246x

MIN TYP MAX

150 1500

1700

–0.2

to

3.2

–0.2

to

3.2

9

µ

µ

nA

nA

Ω

Ω

dB

°

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

5

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

PARAMETER

TEST CONDITIONS

T

†

UNIT

IDDSupply current (per channels)

O

,

,

mA

V

Turnon voltage level

A

1

25°C

V

V

Turnoff voltage level

A

1

25°C

V

I

y

A

PARAMETER

TEST CONDITIONS

T

†

UNIT

V

C

160 pF

VnEquivalent input noise voltage

V/√H

V

O(PP)

()

R

L

kΩ

()

R

L

kΩ

V

,

tsSettling time

25°C

s

V

,

R

C

160 pF

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
(continued)

A

V

pp

(ON)

(OFF)

DD(SHDN)

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Supply current in shutdown
(TLV2460, TLV2463, TLV2465)

p

= 1.5 V, No load,

SHDN > 1.02 V

=

V

=

V

SHDN < 0.8 V, 25°C 0.3
Per channel in shutdown Full range 2.5

Channel 1
Channel 2
Channel 1
Channel 2

25°C 0.5 0.575

Full range 0.9

°

°

operating characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)

A

= 2 V,

SR Slew rate at unity gain

p

I

n

THD + N Total harmonic distortion plus noise

t

(on)

t

(off)

φ

m

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Equivalent input noise current f = 1 kHz 25°C 0.13

Amplifier turnon time

Amplifier turnoff time

Gain-bandwidth product

Phase margin at unity gain
Gain margin

O(PP)

RL = 10 kΩ

f = 100 Hz 25°C 16
f = 1 kHz 25°C 11

=

= 2 V,
RL = 10 kΩ,
f = 1 kHz

AV = 1,

= 10

AV = 1,

= 10

f = 10 kHz,
CL = 160 pF

V

(STEP)PP

A

= –1,
CL = 10 pF,
RL = 10 kΩ

V

(STEP)PP

A

= –1,
CL = 56 pF,
RL = 10 kΩ

= 10 kΩ,

L

= 2 V,

= 2 V,

AV = 1 0.006%
AV = 10
AV = 100 0.08%
Both channels 7.6
Channel 1 only,

Channel 2 on
Channel 2 only,

Channel 1 on
Both channels 333
Channel 1 only,

Channel 2 on
Channel 2 only,

Channel 1 on
RL = 10 kΩ,

0.1% 1.47

0.01%

0.1%

0.01% 1.98

p

=

L

=

L

,

p

25°C

Full

range

25°C

25°C

25°C

25°C 5.2 MHz

°

25°C 44°
25°C 7 dB

TLV246x

MIN TYP MAX

1.021

1.02

0.822

0.817

TLV246x

MIN TYP MAX

1 1.6

0.8

0.02%

7.65

7.25

328

329

1.78

1.77

µ

V/µs

n

pA/√Hz

µs

ns

µ

z

6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER

TEST CONDITIONS

T

†

UNIT

VIOInput offset voltage (TLV246x)

V

V

V

VIOInput offset voltage (TLV246xA)

O

V

25°C

2µV/°C

V

DD

IC

,

R

Ω

V

Common-mode input voltage range

V

I

mA

VOHHigh-level output voltage

V

I

mA

V

I

mA

VOLLow-level output voltage

V

V

I

mA

Sourcing

IOSShort-circuit output current

mA

Sinking

A

gg g

IC

,

L

,

dB

R

S

50 Ω

DD

,

IC DD

,

dB

k

ygj

DD

,

IC DD

,

dB

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)

A

p

= ±2.5 V,

p

α

I

I

I

r
c
z

CMRR Common-mode rejection ratio

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Temperature coefficient of input offset

VIO

voltage

Input offset current

IO

Input bias current

IB

ICR

Output current 25°C ±90 mA

O

Large-signal differential voltage V

VD

amplification
Differential input resistance 25°C 10

i(d)

Common-mode input capacitance f = 10 kHz 25°C 7 pF

i(c)

Closed-loop output impedance f = 100 kHz, AV = 10 25°C 29

o

Supply voltage rejection ratio

SVR

(∆VDD /∆VIO)

p

p

p

p

DD

VIC = 0,

= ±2.5 V,
VIC = 0,
VO = 0,

= 50

S

CMRR > 71 dB, RS = 50 Ω 25°C

CMRR > 60 dB, RS = 50 Ω Full range

= –2.5

OH

= –10

OH

= 2.5 V,

IC

= 2.5 V,

IC

= 2.5 V,

VO = 1 V to 4 V

V

= –0.2 V to 5.2 V,

ICR

=

=

V

= 2.7 V to 6 V, V
No load

= 3 V to 5 V, V

V
No load

= 0,

O

RS = 50 Ω

TLV246xC
TLV246xI

TLV246xC
TLV246xI

= 2.5

OL

= 10

OL

R

= 10 kΩ,

TLV246xC
TLV246xI

= V

= V

/2,

/2,

25°C 150 2000

Full range 2200

25°C

Full range

°

25°C 0.3 7
Full range 15
Full range 60

25°C 1.3 14
Full range 30
Full range 60

25°C 4.9
Full range 4.8

25°C 4.8
Full range 4.7

25°C 0.1
Full range 0.2

25°C 0.2
Full range 0.3

25°C 145
Full range 60

25°C 100
Full range 60

25°C 92 109
Full range 90

25°C 71 85
Full range 69

Full range 60

25°C 80 85
Full range 75

25°C 85 95
Full range 80

TLV246x

MIN TYP MAX

150 1500

1700

–0.2

to

5.2
0

to

5

9

µ

µ

nA

nA

Ω

Ω

dB

°

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

7

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

PARAMETER

TEST CONDITIONS

T

†

UNIT

IDDSupply current (per channel)

O

,

,

mA

V

Turnon voltage level

A

1

25°C

V

V

Turnoff voltage level

A

1

25°C

V

I

y

A

PARAMETER

TEST CONDITIONS

T

†

UNIT

V

C

160 pF

VnEquivalent input noise voltage

V/√H

V

O(PP)

()

R

L

kΩ

()

R

L

kΩ

V

,

tsSettling time

25°C

s

V

,

R

C

160 pF

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
(continued)

A

V

pp

(ON)

(OFF)

DD(SHDN)

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Supply current in shutdown
(TLV2460, TLV2463, TLV2465)

p

= 2.5 V, No load,

SHDN > 1.38 V

=

V

=

V

SHDN < 1.3 V, 25°C 1
Per channels in shutdown Full range 3

Channel 1
Channel 2
Channel 1
Channel 2

25°C 0.55 0.65

Full range 1

°

°

operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)

A

= 2 V,

SR Slew rate at unity gain

p

I

n

THD + N Total harmonic distortion plus noise

t

(on)

t

(off)

φ

m

†

Full range is 0°C to 70°C for the C suffix and –40°C to 125°C for the I suffix. If not specified, full range is –40°C to 125°C.

Equivalent input noise current f = 100 Hz 25°C 0.13

Amplifier turnon time

Amplifier turnoff time

Gain-bandwidth product

Phase margin at unity gain
Gain margin

O(PP)

RL = 10 kΩ

f = 100 Hz 25°C 14
f = 1 kHz 25°C 11

=

= 4 V,
RL = 10 kΩ,
f = 10 kHz

AV = 1,

= 10

AV = 1,

= 10

f = 10 kHz,
CL = 160 pF

V

(STEP)PP

A

= –1,
CL = 10 pF,
RL = 10 kΩ

V

(STEP)PP

A

= –1,
CL = 56 pF,
RL = 10 kΩ

= 10 kΩ,

L

= 2 V,

= 2 V,

AV = 1 0.004%
AV = 10
AV = 100 0.04%
Both channels 7.6
Channel 1 only,

Channel 2 on
Channel 2 only,

Channel 1 on
Both channels 333
Channel 1 only,

Channel 2 on
Channel 2 only,

Channel 1 on
RL = 10 kΩ,

0.1% 1.53

0.01%

0.1%

0.01% 3.33

p

=

L

=

L

,

p

25°C

Full

range

25°C

25°C

25°C

25°C 6.4 MHz

°

25°C 45°
25°C 7 dB

TLV246x

MIN TYP MAX

1.372

1.368

1.315

1.309

TLV246x

MIN TYP MAX

1 1.6

0.8

0.01%

7.65

7.25

328

329

1.83

3.13

µ

V/µs

n

pA/√Hz

µs

ns

µ

z

8

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IDDSupply current

VnEquivalent input noise voltage

Gain bandwidth product

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

Table of Graphs

V

IO

I

IB

I

IO

V

OH

V

OL

V

O(PP)

A

VD

Z

o

CMRR Common-mode rejection ratio vs Frequency 17
k

SVR

SR Slew rate vs Supply voltage 27

THD Total harmonic distortion vs Frequency 32, 33
THD+N Total harmonic distortion plus noise vs Peak-to-peak signal amplitude 34, 35

φ

m

Input offset voltage vs Common-mode input voltage 1, 2
Input bias current vs Free-air temperature 3, 4
Input offset current vs Free-air temperature 3, 4
High-level output voltage vs High-level output current 5, 6
Low-level output voltage vs Low-level output current 7, 8
Peak-to-peak output voltage vs Frequency 9, 10
Open-loop gain vs Frequency 11, 12
Phase vs Frequency 11, 12
Differential voltage amplification vs Load resistance 13
Amplifier stability vs Load 14
Output impedance vs Frequency 15, 16

Supply-voltage rejection ratio vs Frequency 18, 19

pp

Amplifier turnon characteristics 22
Amplifier turnoff characteristics 23
Supply current turnon 24
Supply current turnoff 25
Shutdown supply current vs Free-air temperature 26

p

Phase margin

p

Large signal follower 40, 41
Small signal follower 42, 43
Inverting large signal 44, 45
Inverting small signal 46, 47

vs Supply voltage 20
vs Free-air temperature 21

vs Frequency 28, 29
vs Common-mode input voltage 30, 31

vs Frequency 11, 12
vs Load capacitance

vs Free-air temperature 37
vs Supply voltage 38
vs Free-air temperature 39

FIGURE

36

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

9

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

1

0.8

0.6

0.4

0.2
0

–0.2

–0.4

– Input Offset Voltage – mV

IO

V

–0.6

–0.8

–1

INPUT BIAS AND INPUT OFFSET CURRENT

5

4.5
4

3.5
3

2.5

INPUT OFFSET VOLTAGE

vs

COMMON-MODE INPUT VOLTAGE

VDD = 3 V
TA = 25°C

10.5 1.5 30 2 2.5

V

– Common-Mode Input Voltage – V

ICR

Figure 1

vs

FREE-AIR TEMPERATURE

I

IB

VDD = 3 V
VI = 1.5 V

1

0.8

0.6

0.4

0.2
0

–0.2

–0.4

– Input Offset Voltage – mV

IO

V

–0.6

–0.8

–1

INPUT BIAS AND INPUT OFFSET CURRENT

6

5

3

INPUT OFFSET VOLTAGE

vs

COMMON-MODE INPUT VOLTAGE

VDD = 5 V
TA = 25°C

213504

V

– Common-Mode Input Voltage – V

ICR

Figure 2

vs

FREE-AIR TEMPERATURE

I

IB

VDD = 5 V
VI = 2.5 V

2

1.5
1

– Input Bias and Input Offset Currents – nA

0.5

IO

0

and I

–0.5

–55

IB

I

I

IO

–35 5

–15 25 125
TA – Free-Air Temperature – °C

Figure 3

10

– Input Bias and Input Offset Currents – nA

IO

45 65

85 105

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

and I

IB

I

2

1

0

–1

I

IO

–35 5

–15 25 125–55
TA – Free-Air Temperature – °C

Figure 4

45 65485 105

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

HIGH-LEVEL OUTPUT VOLTAGE

vs

HIGH-LEVEL OUTPUT CURRENT

3

2.5

2

TA = 125°C

1.5

– High-Level Output Voltage – V

OH

0.5

V

TA = 85°C

TA = 25°C

1

TA = –40°C

0

0102030 60

IOH – High-Level Output Current – mA

Figure 5

LOW-LEVEL OUTPUT VOLTAGE

vs

LOW-LEVEL OUTPUT CURRENT

3

VDD = 3 V

2.5
TA = –40°C

DC

VDD = 3 V

TA = –55°C

5040 70 80

DC

HIGH-LEVEL OUTPUT VOLTAGE

HIGH-LEVEL OUTPUT CURRENT

5

4.5
4

3.5
3

TA = 125°C

2.5

1.5

– High-Level Output Voltage – V

OH

V

0.5

TA = 85°C

2

TA = 25°C

TA = –40°C

1

0

0 20 40 60 120

IOH – High-Level Output Current – mA

Figure 6

LOW-LEVEL OUTPUT VOLTAGE

LOW-LEVEL OUTPUT CURRENT

4.5

3.5

VDD = 5 V

4

TA = –40°C

DC

vs

VDD = 5 V

TA = –55°C

10080 140 200

DC

160 180

vs

2

TA = 25°C

TA = 85°C

1.5
TA = 125°C

1

OL

0.5

V – Low-Level Output Voltage – V

TA = –55°C

0

0102030 60

IOL – Low-Level Output Current – mA

5040 70

Figure 7

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

3

2.5

2

1.5

1

OL

V – Low-Level Output Voltage – V

0.5
0

TA = 25°C

TA = 85°C

TA = 125°C

0 204060 120

IOL – Low-Level Output Current – mA

Figure 8

TA = –55°C

10080 140

160

11

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

PEAK-TO-PEAK OUTPUT VOLTAGE

vs

FREQUENCY

3

2.5

2

1.5

1

– Peak-to-Peak Output Voltage – V

0.5

O(PP)

V

0

10k 100k 10M

f – Frequency – Hz

VDD = 3 V
AV = –10
THD = 1%
RL = 10 kΩ

1M

Figure 9

OPEN-LOOP GAIN AND PHASE

100

90
80
70
60
50
40
30
20

Open-Lopp Gain – dB

10

0
–10
–20

100 10k

10

5.5
5

4.5
4

3.5
3

2.5
2

1.5

– Peak-to-Peak Output Voltage – V

1

O(PP)

0.5

V

0

10k 100k 10M

vs

FREQUENCY

VDD = ±1.5 V
RL = 10 kΩ
CL = 0
TA = 25°C

A

VD

Phase

1k 100k 1M

f – Frequency – Hz

PEAK-TO-PEAK OUTPUT VOLTAGE

vs

FREQUENCY

VDD = 5 V
AV = –10
THD = 1%
RL = 10 kΩ

1M

f – Frequency – Hz

Figure 10

40°
20°
0°

–20°
–40°
–60°

10M

–80°
–100°
–120°
–140°
–160°
–180°
–200°

Phase

12

Figure 11

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

OPEN-LOOP GAIN AND PHASE

vs

FREQUENCY

100

90
80
70
60
50
40
30
20

Open-Loop Gain – dB

10

0
–10
–20

100 10k

10

VDD = ±2.5 V
RL = 10 kΩ
CL = 0
TA = 25°C

A

VD

Phase

1k 100k 1M

f – Frequency – Hz

10M

40°
20°
0°

–20°
–40°
–60°
–80°
–100°
–120°
–140°

–160°
–180°
–200°

Phase

DIFFERENTIAL VOLTAGE AMPLIFICATION

vs

LOAD RESISTANCE

180

TA = 25°C

160

140

120

100

– Differential Voltage Amplification – V/mVA

VD

VDD = ±2.5 V

VDD = ±1.5 V

80

60

40

20

0

100 100k

1k 10k 1M

RL – Load Resistance – Ω

Figure 13

Figure 12

– Capacitive Load – pF

L

C

AMPLIFIER STABILITY

vs

LOAD

10000

Phase Margin < 30°

1000

Phase Margin > 30°

VDD = 5 V
Phase Margin = 30°
TA = 25°C

100

10 100 10k

RL – Resistive Load – Ω

1k

Figure 14

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

13

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

OUTPUT IMPEDANCE

FREQUENCY

1000

VDD = ±1.5 V
TA = 25°C

100

Ω

10

AV = 100

1

AV = 10

– Output Impedance –Z

o

0.1

AV = 1

0.01
100 1k 10k 10M1M100k

f – Frequency – Hz

Figure 15

vs

90

1000

VDD = ±2.5 V
TA = 25°C

100

Ω

10

AV = 100

1

AV = 10

– Output Impedance –Z

o

0.1
AV = 1

0.01
100 1k 10k 10M1M100k

COMMON-MODE REJECTION RATIO

vs

FREQUENCY

OUTPUT IMPEDANCE

vs

FREQUENCY

f – Frequency – Hz

Figure 16

85

80

VDD = 5 V

75

70

65

CMRR – Common-Mode Rejection Ratio – dB

60

10 1k 10k 10M1M100k

100

f – Frequency – Hz

VIC = 2.5 V

VDD = 3 V
VIC = 1.5 V

Figure 17

14

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

SUPPLY-VOLTAGE REJECTION RATIO

FREQUENCY

110

100

90

80

70

60

– Supply Voltage Rejection Ratio – dB

50

SVR

k

40

+k

SVR

–k

SVR

–k

10 1k 10k 10M1M100k

100

f – Frequency – Hz

Figure 18

SUPPLY CURRENT

SUPPLY VOLTAGE

0.8

0.7

0.6

IDD = 85°C

vs

SVR

vs

IDD = 125°C

VDD = ±1.5 V
TA = 25°C

+k

SVR

SUPPLY-VOLTAGE REJECTION RATIO

FREQUENCY

90

–k

80

70

60

50

– Supply Voltage Rejection Ratio – dB

SVR

k

40

SVR

10 1k 10k 10M1M100k

100

+k

SVR

f – Frequency – Hz

Figure 19

SUPPLY CURRENT

FREE-AIR TEMPERATURE

0.80

0.75

0.70

0.65

–k

vs

SVR

vs

VDD = ±2.5 V
TA = 25°C

+k

SVR

VDD = 5 V
VI = 2.5 V

0.5

0.40

– Supply Current – mA

DD

0.30

I

0.20

0.10

IDD = –55°C

34

IDD = 25°C

IDD = –40°C

3.5 4.5 62.5
VDD – Supply Voltage – V

5 5.5

Figure 20

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

0.60

0.55

0.50

– Supply Current – mA

0.45

DD

I

0.40

0.35

0.30
–35 5

–55

–15 25 125
TA – Free-Air Temperature – °C

Figure 21

VDD = 3 V
VI = 1.5 V

45 65

85 105

15

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

5

4

3

2

1

0

3

– Shutdown Voltage – V

SD

V

2

1

0

–5

AMPLIFIER WITH A SHUTDOWN PULSE

TURNON CHARACTERISTICS

Shutdown Pin

Amplifier Output

VDD = 5 V
RL = 10 kΩ
AV = 1
TA = 25°C

–3 1

–1 3 9

t – Time – µs

57

Figure 22

SUPPLY CURRENT WITH A SHUTDOWN PULSE

TURNON CHARACTERISTICS

1

Shutdown Pin

AMPLIFIER WITH A SHUTDOWN PULSE

TURNOFF CHARACTERISTICS

5

4

Shutdown Pin

3

2

1

0

Amplifier Output

3

– Shutdown Voltage – V

2

SD

V

1

0

11

–5

–3 1

–1 3

t – Time – µs

VDD = 5 V
RL = 10 kΩ
AV = 1
TA = 25°C

57

Figure 23

5.5

0.8

0.6

0.4

0.2

– Supply Current – mA

DD

I

0

–0.2

–0.4 –0.2 0 0.6

t – Time – µs

Supply Current

VDD = 5 V
VI = 2.5 V
AV = 1
TA = 25°C

Figure 24

4.5

3.5

2.5

1.5

– Shutdown Voltage – V

SD

V

0.5

0.40.2

–0.5

16

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

TURNOFF SUPPLY CURRENT

WITH A SHUTDOWN PULSE

1

Shutdown Pin

0.8

VDD = 5 V
VI = 2.5 V
AV = 1
TA = 25°C

5.5

4.5

2.5

1.5

0.6

Supply Current

0.4

0.2

– Supply Current – mA

DD

I

0

–0.2

–0.4 –0.2 0 0.6

t – Time – µs

0.40.2

3.5

2.5

1.5

0.5

–0.5

– Shutdown Voltage – V

SD

V

Figure 25

SHUTDOWN SUPPLY CURRENT

vs

FREE-AIR TEMPERATURE

3

2

VDD = 5 V
VI = 2.5 V

1.8

1.75

1.7

1.65

1.6

SR+

SLEW RATE

vs

SUPPLY VOLTAGE

I Supply Current – –Aµ

DD

0.5

–0.5

–1

1

0

–35 5

VDD = 3 V
VI = 1.5 V

–15 25 125–55
TA – Free-Air Temperature – °C

45 65 85 105

Figure 26

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

1.55

1.5

1.45

SR – Slew Rate – V/µs

1.4

1.35

1.3

2.5 3 3.5 4 5.5 654.5

SR–

V

= 2 V

O(PP)

CL = 160 pF
AV = 1
RL = 10 kΩ
TA = 25°C

VDD – Supply Voltage – V

Figure 27

17

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

EQUIVALENT INPUT NOISE VOLTAGE

vs

FREQUENCY

18

17

nV/ Hz– Equivalent Input Noise Voltage –V

16

15

14

13

12

11

n

10

100 1k 100k

f – Frequency – Hz

10k

Figure 28

EQUIVALENT INPUT NOISE VOLTAGE

vs

COMMON-MODE INPUT VOLTAGE

20

VDD = 3 V
AV = 10
f = 1 kHz

15

nV/ Hz– Equivalent Input Noise Voltage –V

TA = 25°C

VDD = 3 V
AV = 10
VI = 1.5 V
TA = 25°C

EQUIVALENT INPUT NOISE VOLTAGE

vs

FREQUENCY

18

17

nV/ Hz– Equivalent Input Noise Voltage –V

16

15

14

13

12

11

n

10

100 1k 100k

f – Frequency – Hz

VDD = 5 V
AV = 10
VI = 2.5 V
TA = 25°C

10k

Figure 29

EQUIVALENT INPUT NOISE VOLTAGE

vs

COMMON-MODE INPUT VOLTAGE

20

VDD = 5 V
AV = 10
f = 1 kHz

15

nV/ Hz– Equivalent Input Noise Voltage –V

TA = 25°C

18

14

13

12

11

n

10

0.5 1.5 3

0

V

ICR

1

– Common-Mode Input Voltage – V

2 2.5

Figure 30

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

14

13

12

11

n

10

0

13

V

– Common-Mode Input Voltage – V

ICR

2

45

Figure 31

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

TOTAL HARMONIC DISTORTION

vs

FREQUENCY

0.5
VDD = ±1.5 V

V

= 2 V

O(PP)

RL = 10 kΩ

0.1

0.010

THD – Total Harmonic Distortion – %

0.001
100 10k

AV = 100

AV = 10

AV = 1

1k 100k10

f – Frequency – Hz

Figure 32

TOTAL HARMONIC DISTORTION PLUS NOISE

vs

PEAK-TO-PEAK SIGNAL AMPLITUDE

1

VDD = 3 V
AV = 1
TA = 25°C

0.1

RL = 250 Ω

RL = 2 kΩ

RL = 10 kΩ

TOTAL HARMONIC DISTORTION

vs

FREQUENCY

1

VDD = ±2.5 V
V

= 4 V

O(PP)

RL = 10 kΩ

0.1

0.010

THD – Total Harmonic Distortion – %

0.001

AV = 100

AV = 10

AV = 1

100 10k

1k 100k10

f – Frequency – Hz

Figure 33

TOTAL HARMONIC DISTORTION PLUS NOISE

vs

PEAK-TO-PEAK SIGNAL AMPLITUDE

1

RL = 250 Ω

RL = 2 kΩ

0.1

RL = 10 kΩ

0.010

THD+N – Total Harmonic Distortion +Noise – %

0.001
1 1.2 1.4 1.6 2.2 2.421.8 2.6 2.8 3 3.2

Peak-to-Peak Signal Amplitude – V

Figure 34

0.010

RL = 100 kΩ

VDD = 5 V
AV = 1

THD+N – Total Harmonic Distortion +Noise – %

0.001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TA = 25°C

4 4.1 4.2 4.3 4.6 4.74.54.4 4.8 4.9 5

RL = 100 kΩ

Peak-to-Peak Signal Amplitude – V

Figure 35

19

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

PHASE MARGIN

LOAD CAPACITANCE

90

VDD = ±2.5 V
TA = 25°C

80

RL = 10 kΩ

70

R

= 50 Ω

60

50

40

30

m

20

φ – Phase Margin – degrees

10

0

10 10k

null

100 1k 100k
CL – Load Capacitance – pF

Figure 36

GAIN BANDWIDTH PRODUCT

SUPPLY VOLTAGE

5

CL = 160 pF
RL = 10 kΩ

4.75

f = 10 kHz
TA = 25°C

4.5

vs

vs

PHASE MARGIN

vs

FREE-AIR TEMPERATURE

60

RL = 10 kΩ
CL = 160 pF

55

50

45 65

VDD = ±2.5 V

VDD = ±1.5 V

85 105

45

R

= 20 Ω

null

40

R

null

= 0 Ω

m

φ – Phase Margin – degrees

35

30

–35 5

–15 25 125–55
TA – Free-Air Temperature – °C

Figure 37

GAIN BANDWIDTH PRODUCT

vs

FREE-AIR TEMPERATURE

5

RL = 10 kΩ
CL = 160 pF

4.75
VDD = ±2.5 V

4.5

4.25

4.25

4

Gain Bandwidth Product – MHz

3.75

3.5

2.5 3 3.5 4 5.5 654.5
VDD – Supply Voltage – V

20

Figure 38

4

3.75
VDD = ±1.5 V

3.5

Gain Bandwidth Product – MHz

3.25

3

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

–35 5

–15 25 125–55
TA – Free-Air Temperature – °C

45 65

Figure 39

85 105

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

LARGE SIGNAL FOLLOWER

2.2

2

1.8

1.6

1.4

– Voltage – V

O

V

1.2

1

0.8
–2 0 2 4 10

Input

Output

VDD = 3 V
V

I(PP)

VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C

Figure 40

SMALL SIGNAL FOLLOWER

1.6

= 1 V

Input

Output

861214

t – Time – µs

16 18

LARGE SIGNAL FOLLOWER

3.7

3.3
Input

2.9

2.5

– Voltage – V

O

V

2.1

1.7

1.3

–2 0 2 4 10

VDD = 5 V
V

I(PP)

VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C

Figure 41

SMALL SIGNAL FOLLOWER

2.6

Output

= 2 V

Input

Output

861214

t – Time – µs

16 18

1.55

Input

1.5

I(PP)

Output

= 100 mV

– Voltage – V

O

V

1.45

1.4
–0.2 0 0.2 0.4 1

VDD = 3 V
V
VI = 1.5 V
RL = 10 kΩ

Figure 42

CL = 160 pF
AV = 1
TA = 25°C

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

2.55

Input

2.5

I(PP)

Output

= 100 mV

– Voltage – V

O

V

2.45

2.4
–0.2 0 0.2 0.4 1

VDD = 5 V
V
VI = 2.5 V
RL = 10 kΩ

Figure 43

CL = 160 pF
AV = 1
TA = 25°C

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

21

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

TYPICAL CHARACTERISTICS

INVERTING LARGE SIGNAL

2.3

2.1

1.9

1.7

1.5

1.3

– Voltage – V

O

V

1.1

0.9

0.7

0.5
–0.2 0 0.2 0.4 1

Input

VDD = 3 V
V
VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C

Output

Figure 44

INVERTING SMALL SIGNAL

1.6

= 1 V

I(PP)

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

INVERTING LARGE SIGNAL

4

3.5

3

2.5

– Voltage – V

O

V

2

1.5

1

–0.2 0 0.2 0.4 1

Input

VDD = 5 V
V

I(PP)

VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C

Output

Figure 45

INVERTING SMALL SIGNAL

2.6

= 2 V

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

1.55

1.5

– Voltage – V

O

V

1.45

1.4
–0.2 0 0.2 0.4 1

Figure 46

Input

VDD = 3 V
V

= 100 mV

I(PP)

VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C

Output

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

2.55

2.5

– Voltage – V

O

V

2.45

2.4
–0.2 0 0.2 0.4 1

Figure 47

Input

VDD = 5 V
V

= 100 mV

I(PP)

VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C

Output

0.80.6 1.2 1.4

t – Time – µs

1.6 1.8

22

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

PARAMETER MEASUREMENT INFORMATION

_
+

R

null

R

L

C

L

Figure 48

APPLICATION INFORMATION

driving a capacitive load

When the amplifier is configured in this manner, capacitive loading directly on the output will decrease the
device’s phase margin leading to high frequency ringing or oscillations. Therefore, for capacitive loads of greater
than 10 pF, it is recommended that a resistor be placed in series (R
shown in Figure 49. A minimum value of 20 Ω should work well for most applications.

R

F

R

Input

G

_
+

R

NULL

C

) with the output of the amplifier, as

NULL

Output

LOAD

Figure 49. Driving a Capacitive Load

offset voltage

The output offset voltage, (VOO) is the sum of the input offset voltage (VIO) and both input bias currents (IIB) times
the corresponding gains. The following schematic and formula can be used to calculate the output offset
voltage:

R

F

I

VOO+

R

G

R

S

V

ǒ

IO

Figure 50. Output Offset Voltage Model

1

) ǒ

R
R

IB–

I

IB+

+

V

I

F

Ǔ

"

I

Ǔ

IB

G

)

–
+

R

1

) ǒ

F

Ǔ

R

G

R

ǒ

S

V

O

"

I

Ǔ

IB–RF

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

23

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

APPLICATION INFORMATION

general configurations

When receiving low-level signals, limiting the bandwidth of the incoming signals into the system is often
required. The simplest way to accomplish this is to place an RC filter at the noninverting terminal of the amplifer
(see Figure 51).

R

G

R

F

–

R
R

C1

F

G

+

ǒ

Ǔ

1)sR1C1

f

1

–3dB

Ǔ

V

I

R1

V

O

+ ǒ

1

V

I

)

+

2pR1C1

V

O

1

Figure 51. Single-Pole Low-Pass Filter

If even more attenuation is needed, a multiple pole filter is required. The Sallen-Key filter can be used for this
task. For best results, the amplifier should have a bandwidth that is 8 to 10 times the filter frequency bandwidth.
Failure to do this can result in phase shift of the amplifier.

C1

V

I

R2R1

C2

R

G

+
_

R

F

R1 = R2 = R
C1 = C2 = C
Q = Peaking Factor
(Butterworth Q = 0.707)

1

+

2pRC

R

F

1

2 –

(

)

Q

R

f

–3dB

G

=

24

Figure 52. 2-Pole Low-Pass Sallen-Key Filter

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

APPLICATION INFORMATION

shutdown function

Three members of the TLV246x family (TLV2460/3/5) have a shutdown terminal for conserving battery life in
portable applications. When the shutdown terminal is tied low, the supply current is reduced to 0.3 µA/channel,
the amplifier is disabled, and the outputs are placed in a high impedance mode. To enable the amplifier, the
shutdown terminal can either be left floating or pulled high. When the shutdown terminal is left floating, care
should be taken to ensure that parasitic leakage current at the shutdown terminal does not inadvertently place
the operational amplifier into shutdown. The shutdown terminal threshold is always referenced to V
Therefore, when operating the device with split supply voltages (e.g. ±2.5 V), the shutdown terminal needs to
be pulled to V

The amplifier’s output with a shutdown pulse is shown in Figures 22, 23, 24, and 25. The amplifier is powered
with a single 5-V supply and configured as a noninverting configuration with a gain of 5. The amplifier turnon
and turnoff times are measured from the 50% point of the shutdown pulse to the 50% point of the output
waveform. The times for the single, dual, and quad are listed in the data tables.

circuit layout considerations

T o achieve the levels of high performance of the TL V246x, follow proper printed-circuit board design techniques.
A general set of guidelines is given in the following.

– (not GND) to disable the operational amplifier.

DD

DD

/2.

D

Ground planes – It is highly recommended that a ground plane be used on the board to provide all
components with a low inductive ground connection. However, in the areas of the amplifier inputs and
output, the ground plane can be removed to minimize the stray capacitance.

D

Proper power supply decoupling – Use a 6.8-µF tantalum capacitor in parallel with a 0.1-µF ceramic
capacitor on each supply terminal. It may be possible to share the tantalum among several amplifiers
depending on the application, but a 0.1-µF ceramic capacitor should always be used on the supply terminal
of every amplifier. In addition, the 0.1-µF capacitor should be placed as close as possible to the supply
terminal. As this distance increases, the inductance in the connecting trace makes the capacitor less
effective. The designer should strive for distances of less than 0.1 inches between the device power
terminals and the ceramic capacitors.

D

Sockets – Sockets can be used but are not recommended. The additional lead inductance in the socket pins
will often lead to stability problems. Surface-mount packages soldered directly to the printed-circuit board
is the best implementation.

D

Short trace runs/compact part placements – Optimum high performance is achieved when stray series
inductance has been minimized. To realize this, the circuit layout should be made as compact as possible,
thereby minimizing the length of all trace runs. Particular attention should be paid to the inverting input of
the amplifier. Its length should be kept as short as possible. This will help to minimize stray capacitance at
the input of the amplifier.

D

Surface-mount passive components – Using surface-mount passive components is recommended for high
performance amplifier circuits for several reasons. First, because of the extremely low lead inductance of
surface-mount components, the problem with stray series inductance is greatly reduced. Second, the small
size of surface-mount components naturally leads to a more compact layout thereby minimizing both stray
inductance and capacitance. If leaded components are used, it is recommended that the lead lengths be
kept as short as possible.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

25

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

APPLICATION INFORMATION

general power dissipation considerations

For a given θJA, the maximum power dissipation is shown in Figure 53 and is calculated by the following formula:

T

MAX–TA

Where:

ǒ

PD+

P

= Maximum power dissipation of THS246x IC (watts)

D

T

= Absolute maximum junction temperature (150°C)

MAX

T

= Free-ambient air temperature (°C)

A

θ

= θ

JA

JC

+ θ

q

θJC= Thermal coefficient from junction to case
θCA= Thermal coefficient from case to ambient air (°C/W)

2

1.75

Ǔ

JA

CA

MAXIMUM POWER DISSIPATION

vs

FREE-AIR TEMPERATURE

PDIP Package
Low-K Test PCB
θJA = 104°C/W

TJ = 150°C

1.5

SOIC Package

1.25

Low-K Test PCB
θJA = 176°C/W

1

0.75

0.5

Maximum Power Dissipation – W

SOT-23 Package

0.25

Low-K Test PCB
θJA = 324°C/W

0

–55–40 –25 –10 5

TA – Free-Air Temperature – °C

NOTE A: Results are with no air flow and using JEDEC Standard Low-K test PCB.

20 35 50

MSOP Package
Low-K Test PCB
θJA = 260°C/W

65 80 95 110 125

Figure 53. Maximum Power Dissipation vs Free-Air Temperature

26

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

macromodel information

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

APPLICATION INFORMATION

Macromodel information provided was derived using Microsim
software used with Microsim

PSpice

. The Boyle macromodel (see Note 2) and subcircuit in Figure 54 are

generated using the TLV246x typical electrical and operating characteristics at T

Parts

 Release 8, the model generation

= 25°C. Using this

A

information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most
cases):

D

Maximum positive output voltage swing

D

Maximum negative output voltage swing

D

Slew rate

D

Quiescent power dissipation

D

Input bias current

D

Open-loop voltage amplification

NOTE 2: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Intergrated Circuit Operational Amplifiers”,

V

GND

Journal of Solid-State Circuits,

3

DD+

RP

2

IN –

IN+

1

DP

4

ISS

SC-9, 353 (1974).

RSS

10

J1 J2

11

C1

RD1

CSS

12

RD2

+

VD

–

DC

DE

+

VE

–

53

54

D

Unity-gain frequency

D

Common-mode rejection ratio

D

Phase margin

D

DC output resistance

D

AC output resistance

D

Short-circuit output current limit

EGND

R2 6

9

+

VB

–

90

HLIM

+

–

GCM

+

DLP

–

+

–

91

C2

GA

DLN

FB

99

RO2

7

+

VLIM

92

–

VLNVLP

+

–

8

RO1

5

IEEE

OUT

.SUBCKT TLV246X 1 2 3 4 5

PSpice

C1 11 12 2.46034E–12
C2 6 7 10.0000E–12
CSS 10 99 443.21E–15
DC 5 53 DY
DE 54 5 DY
DLP 90 91 DX
DLN 92 90 DX
DP 43DX
EGND 99 0 POLY (2) (3,0) (4,0) 0 .5 .5
FB 7 99 POLY (5) VB VC VE VLP
+ VLN 0 21.600E6 –1E3 1E3 22E6 –22E6
GA 6 0 11 12 345.26E–6
GCM 0 6 10 99 15.4226E–9
ISS 10 4 DC 18.850E–6
HLIM 90 0 VLIM 1K
J1 11 2 10 JX1
J2 12 1 10 JX2
R2 6 9 100.00E3

and

Parts

are trademarks of MicroSim Corporation.

RD1 3 11 2.8964E3
RD2 3 12 2.8964E3
R01 8 5 5.6000
R02 7 99 6.2000
RP 3 4 8.9127
RSS 10 99 10.610E6
VB 9 0 DC 0
VC 3 53 DC .7836
VE 54 4 DC .7436
VLIM 7 8 DC 0
VLP 91 0 DC 117
VLN 0 92 DC 117
.MODEL DX D (IS=800.00E–18)
.MODEL DY D (IS=800.00E–18 Rs = 1m Cjo=10p)
.MODEL JX1 NJF (IS=1.0000E–12 BETA=6.3239E–3
+ VTO=–1)
.MODEL JX2 NJF (IS=1.0000E–12 BETA=6.3239E–3
+ VTO=–1)
.ENDS

Figure 54. Boyle Macromodels and Subcircuit

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

27

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

macromodel information (continued)

.subckt TLV_246Y 1 2 3 4 5 6

21.600E6 –1E3 1E3 22E6 –22E6

c1 11 12 2.4603E–12
c2 72 7 10.000E–12
css 10 99 443.21E–15
dc 70 53 dy
de 54 70 dy
dlp 90 91 dx
dln 92 90 dx
dp 4 3 dx
egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5
fb 7 99 poly(5) vb vc ve vlp vln 0

ga 72 0 11 12 345.26E–6
gcm 0 72 10 99 15.422E–9
iss 74 4 dc 18.850E–6
hlim 90 0 vlim 1K
j1 11 2 10 jx1
j2 12 1 10 jx2
r2 72 9 100.00E3
rd1 3 11 2.8964E3
rd2 3 12 2.8964E3
ro1 8 70 5.6000
ro2 7 99 6.2000

Figure 54. Boyle Macromodels and Subcircuit (Continued)

rp 3 71 8.9127
rss 10 99 10.610E6
rs1 6 4 1G
rs2 6 4 1G
rs3 6 4 1G
rs4 6 4 1G
s1 71 4 6 4 s1x
s2 70 5 6 4 s1x
s3 10 74 6 4 s1x
s4 74 4 6 4 s2x
vb 9 0 dc 0
vc 3 53 dc .7836
ve 54 4 dc .7436
vlim 7 8 dc 0
vlp 91 0 dc 117
vln 0 92 dc 117
.model dx D(Is=800.00E–18)
.model dy D(Is=800.00E–18 Rs=1m Cjo=10p)
.model jx1 NJF(Is=1.0000E–12 Beta=6.3239E–3 Vto=–1)
.model jx2 NJF(Is=1.0000E–12 Beta=6.3239E–3 Vto=–1)
.model s1x VSWITCH(Roff=1E8 Ron=1.0 Voff=2.5 Von=0.0)
.model s2x VSWITCH(Roff=1E8 Ron=1.0 V off=0 Von=2.5)
.ends

28

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PIN SHOWN

0.050 (1,27)

14

1

0.069 (1,75) MAX

A

0.020 (0,51)

0.014 (0,35)

0.010 (0,25)

0.004 (0,10)

DIM

8

7

PINS **

0.010 (0,25)

0.157 (4,00)

0.150 (3,81)

M

0.244 (6,20)

0.228 (5,80)

Seating Plane

0.004 (0,10)

8

14

0.008 (0,20) NOM

0°–8°

16

Gage Plane

0.010 (0,25)

0.044 (1,12)

0.016 (0,40)

A MAX

A MIN

NOTES: B. All linear dimensions are in inches (millimeters).

C. This drawing is subject to change without notice.
D. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).

E. Falls within JEDEC MS-012

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

0.197

(5,00)

0.189

(4,80)

0.344

(8,75)

0.337

(8,55)

0.394

(10,00)

0.386

(9,80)

4040047/D 10/96

29

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

DBV (R-PDSO-G5) PLASTIC SMALL-OUTLINE PACKAGE

0,95

1,30
1,00

0,40
0,20

45

1,80
1,50

1

3,10

2,70

3

0,05 MIN

M

0,25

3,00
2,50

Seating Plane

0,10

0,15 NOM

0°–8°

Gage Plane

0,25

0,55
0,35

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.
C. Body dimensions include mold flash or protrusion.

4073253-4/B 10/97

30

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

DBV (R-PDSO-G6) PLASTIC SMALL-OUTLINE PACKAGE

0,95

1,30
1,00

0,40
0,20

46

1,80
1,50

1

3,10
2,70

3

0,05 MIN

M

0,25

3,00
2,50

Seating Plane

0,15 NOM

Gage Plane

0,25

0°–8°

0,10

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

C. Body dimensions include mold flash or protrusion.

4073253-5/B 10/97

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

31

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

DGK (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE

0,65

0,38
0,25

8

1

3,05
2,95

5

3,05
2,95

4

Seating Plane

0,25

4,98
4,78

M

0,15 NOM

Gage Plane

0,25

0°–6°

0,69

0,41

1,07 MAX

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-187

0,15 MIN

0,10

4073329/A 02/97

32

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

DGS (S-PDSO-G10) PLASTIC SMALL-OUTLINE PACKAGE

0,50

10

1

1,07 MAX

3,05
2,95

0,27

0,17

6

3,05
2,95

5

Seating Plane

0,15
0,05

0,25

4,98
4,78

M

0,10

0,15 NOM

Gage Plane

0°–6°

0,25

0,69

0,41

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

C. Body dimensions do not include mold flash or protrusion.

4073272/A 12/97

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

33

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

N (R-PDIP-T**) PLASTIC DUAL-IN-LINE PACKAGE

16 PIN SHOWN

16

1

0.035 (0,89) MAX

PINS **

DIM

A

9

0.260 (6,60)

0.240 (6,10)

8

0.070 (1,78) MAX

0.020 (0,51) MIN

0.200 (5,08) MAX

A MAX

A MIN

Seating Plane

14

0.775

(19,69)

0.745

(18,92)

16

0.775

(19,69)

0.745

(18,92)

18

0.920

(23.37)

0.850

(21.59)

0.310 (7,87)

0.290 (7,37)

20

0.975

(24,77)

0.940

(23,88)

0.100 (2,54)

0.021 (0,53)

0.015 (0,38)

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.)

0.010 (0,25)

M

0.125 (3,18) MIN

0°–15°

0.010 (0,25) NOM

14/18 PIN ONL Y

4040049/C 08/95

34

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA

FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

P (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE

0.400 (10,60)

0.355 (9,02)

58

0.260 (6,60)

0.240 (6,10)

41

0.070 (1,78) MAX

0.020 (0,51) MIN

0.200 (5,08) MAX

0.125 (3,18) MIN

0.100 (2,54)

0.021 (0,53)

0.015 (0,38)

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.

C. Falls within JEDEC MS-001

0.010 (0,25)

M

0.310 (7,87)

0.290 (7,37)

Seating Plane

0°–15°

0.010 (0,25) NOM

4040082/B 03/95

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

35

TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN

SLOS220F – JULY 1998 – REVISED OCT OBER 1999

MECHANICAL DATA

PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PIN SHOWN

0,65

14

1

1,20 MAX

0,30
0,19

8

4,50
4,30

7

A

0,15
0,05

6,60
6,20

M

0,10

Seating Plane

0,10

0,15 NOM

Gage Plane

0,25

0°–8°

0,75
0,50

PINS **

DIM

A MAX

A MIN

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153

8

3,10

2,90

14

5,10

4,90

16

5,10

20

6,60

6,404,90

24

7,90

7,70

28

9,80

9,60

4040064/E 08/96

36

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

CERTAIN APPLICA TIONS USING SEMICONDUCT OR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  1999, Texas Instruments Incorporated