TEXAS INSTRUMENTS SRC4192, SRC4193 Technical data
S
R
C
4
1
9
2
SRC4192
(1)
192kHz Stereo Asynchronous
Sample Rate Converters
FEATURES
● AUTOMATIC SENSING OF THE INPUT-TO-
OUTPUT SAMPLING RATIO
● WIDE INPUT-TO-OUTPUT SAMPLING RANGE:
16:1 to 1:16
● SUPPORTS INPUT & OUTPUT SAMPLING
RATES UP TO 212kHz
● DYNAMIC RANGE: 144dB (-60dbFS input,
BW = 20Hz to fS/2, A-Weighted)
● THD+N: -140dB (0dbFS input, BW = 20Hz to
fS/2)
● ATTENUATES SAMPLING AND REFERENCE
CLOCK JITTER
● HIGH PERFORMANCE, LINEAR PHASE
DIGITAL FILTERING WITH BETTER THAN
140dB OF STOP BAND ATTENUATION
● FLEXIBLE AUDIO SERIAL PORTS:
Master or Slave Mode Operation
Supports I2S, Left Justified, Right Justified, and
TDM Data Formats
Supports 16, 18, 20, or 24-Bit Audio Data
TDM Mode allows daisy chaining of up to eight
devices
● SUPPORTS 24-, 20-, 18-, or 16-BIT INPUT AND
OUTPUT DATA
All output data is dithered from the internal
28-Bit data path
● LOW GROUP DELAY OPTION FOR INTERPO-
LATION FILTER
● DIRECT DOWNSAMPLING OPTION FOR
DECIMATION FILTER (SRC4193 ONLY)
● SPI PORT PROVIDES ACCESS TO INTERNAL
CONTROL REGISTERS (SRC4193 ONLY)
● SOFT MUTE FUNCTION
● BYPASS MODE
● PROGRAMMABLE DIGITAL OUTPUT
ATTENUATION (SRC4193 ONLY)
256 steps: 0dB to –127.5dB, 0.5dB/step
(1) U.S. Patent No. 7,262,716.
(2) Refer to the Applications Information section of this data sheet for details.
S
R
C
4
1
9
3
SBFS022B – JUNE 2003 – REVISED SEPTEMBER 2007
SRC4193
(1)
● POWER DOWN MODE
● OPERATES FROM A SINGLE +3.3 VOLT
POWER SUPPLY
● SMALL 28-LEAD SSOP PACKAGE
● PIN COMPATIBLE WITH THE AD1896
(SRC4192 ONLY)
(2)
APPLICATIONS
● DIGITAL MIXING CONSOLES
● DIGITAL AUDIO WORKSTATIONS
● AUDIO DISTRIBUTION SYSTEMS
● BROADCAST STUDIO EQUIPMENT
● HIGH-END A/V RECEIVERS
● GENERAL DIGITAL AUDIO PROCESSING
DESCRIPTION
The SRC4192 and SRC4193 are asynchronous sample rate
converters designed for professional and broadcast audio
applications. The SRC4192 and SRC4193 combine a wide
input-to-output sampling ratio with outstanding dynamic range
and ultra low distortion. Input and output serial ports support
standard audio formats, as well as a Time Division Multiplexed (TDM) mode. Flexible audio interfaces allow the
SRC4192 and SRC4193 to connect to a wide range of audio
data converters, digital audio receivers and transmitters, and
digital signal processors.
The SRC4192 is a standalone pin programmed device, with
control pins for mode, data format, mute, bypass, and low
group delay functions. The SRC4193 is a software-controlled
device featuring a serial peripheral interface (SPI) port, which
is utilized to program all functions via internal control registers.
The SRC4192 and SRC4193 may be operated from a single
+3.3V power supply. A separate digital I/O supply (V
operates over the +1.65V to +3.6V supply range, allowing
greater flexibility when interfacing to current and future generation signal processors and logic devices. Both the
SRC4192 and SRC4193 are available in a 28-lead SSOP
package.
IO
)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2003-2007, Texas Instruments Incorporated
www.ti.com
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDD.......................................................... –0.3V to +4.0V
Supply Voltage, V
Digital Input Voltage .......................................................... –0.3V to +4.0V
Operating Temperature Range ........................................–45°C to +85°C
Storage Temperature Range ......................................... –65°C to +150°C
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is
not implied.
........................................................... –0.3V to +4.0V
IO
(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION
PRODUCT PACKAGE-LEAD DESIGNATOR
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
SRC4192 SSOP-28 DB –45°C to +85°C SRC4192I SRC4192IDB Rails, 50
(1)
SPECIFIED
RANGE MARKING NUMBER MEDIA, QUANTITY
" """"SRC4192IDBR Tape and Reel, 2000
SRC4193 SSOP-28 DB –45°C to +85°C SRC4193I SRC4193IDB Rails, 50
" """"SRC4193IDBR Tape and Reel, 2000
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or see the TI web site at www.ti.com.
PIN CONFIGURATION (SRC4192)
Top View
LGRP
1
RCKI
2
NC
3
SDIN
4
BCKI
5
LRCKI
DGND
BYPAS
IFMT0
IFMT1
IFMT2
VIO
RST
MUTE
6
7
8
9
10
11
12
13
14
SRC4192
28
27
26
25
24
23
22
21
20
19
18
17
16
15
MODE2
MODE1
MODE0
BCKO
LRCKO
SDOUT
VDD
DGND
TDMI
OFMT0
OFMT1
OWL0
OWL1
RDY
PIN DESCRIPTIONS (SRC4192)
PIN# NAME DESCRIPTION
1 LGRP Low Group Delay Control Input (Active High)
2 RCKI Reference Clock Input
3 N.C. No Connection
4 SDIN Audio Serial Data Input
5 BCKI Input Port Bit Clock I/O
6 LRCKI Input Port Left/Right Word Clock I/O
7V
8 DGND Digital Ground
9 BYPAS ASRC Bypass Control Input (Active High)
10 IFMT0 Input Port Data Format Control Input
11 IFMT1 Input Port Data Format Control Input
12 IFMT2 Input Port Data Format Control Input
13 RST Reset Input (Active Low)
14 MUTE Output Mute Control Input (Active High)
15 RDY ASRC Ready Status Output (Active Low)
16 OWL1 Output Port Data Word Length Control Input
17 OWL0 Output Port Data Word Length Control Input
18 OFMT1 Output Port Data Format Control Input
19 OFMT0 Output Port Data Format Control Input
20 TDMI TDM Data Input (Connect to DGND when not in use)
21 DGND Digital Ground
22 V
23 SDOUT Audio Serial Data Output
24 LRCKO Output Port Left/Right Word Clock I/O
25 BCKO Output Port Bit Clock I/O
26 MODE0 Serial Port Mode Control Input
27 MODE1 Serial Port Mode Control Input
28 MODE2 Serial Port Mode Control Input
Digital I/O Supply, +1.65V to V
IO
Digital Core Supply, +3.3V
DD
DD
2
www.ti.com
SRC4192, SRC4193
SBFS022B
PIN CONFIGURATION (SRC4193)
Top View
RCKI
1
NC
2
NC
3
SDIN
4
BCKI
5
LRCKI
6
VIO
DGND
BYPAS
NC
NC
NC
RST
MUTE
7
8
9
10
11
12
13
14
SRC4193
28
27
26
25
24
23
22
21
20
19
18
17
16
15
CDATA
CCLK
CS
BCKO
LRCKO
SDOUT
V
DD
DGND
TDMI
NC
NC
NC
RATIO
RDY
PIN DESCRIPTIONS (SRC4193)
PIN# NAME DESCRIPTION
1 RCKI Reference Clock Input
2 N.C. No Connection
3 N.C. No Connection
4 SDIN Audio Serial Data Input
5 BCKI Input Port Bit Clock I/O
6 LRCKI Input Port Left/Right Word Clock I/O
7V
8 DGND Digital Ground
9 BYPAS ASRC Bypass Control Input (Active High)
10 N.C. No Connection
11 N.C. No Connection
12 N.C. No Connection
13 RST Reset Input (Active Low)
14 MUTE Output Mute Control Input (Active High)
15 RDY ASRC Ready Status Output (Active Low)
16 RATIO Input-to-Output Ratio Flag Output
17 N.C. No Connection
18 N.C. No Connection
19 N.C. No Connection
20 TDMI TDM Data Input (Connect to DGND when not in use)
21 DGND Digital Ground
22 V
23 SDOUT Audio Serial Data Output
24 LRCKO Output Port Left/Right Word Clock I/O
25 BCKO Output Port Bit Clock I/O
26 CS SPI Port Chip Select Input (Active Low)
27 CCLK SPI Port Data Clock Input
28 CDATA SPI Port Serial Data Input
Digital I/O Supply, +1.65V to V
IO
Low output denotes Output rate lower than Input rate.
High output denotes Output rate higher than Input rate.
Digital Core Supply, +3.3V
DD
DD
SRC4192, SRC4193
SBFS022B
www.ti.com
3
ELECTRICAL CHARACTERISTICS
All parameters specified with TA = +25°C, V
PARAMETER CONDITION MIN TYP MAX UNITS
DYNAMIC PERFORMANCE
(1)
Resolution 24 Bits
Input Sampling Frequency f
Output Sampling Frequency f
Input: Output Sampling Ratio
Upsampling 1:16
Downsampling 16:1
Dynamic Range BW = 20Hz to f
44.1kHz; 48kHz 140 dB
48kHz; 44.1kHz 140 dB
48kHz; 96kHz 140 dB
44.1kHz; 192kHz 138 dB
96kHz; 48kHz 141 dB
192kHz; 12kHz 141 dB
192kHz; 32kHz 141 dB
192kHz; 48kHz 141 dB
32kHz; 48kHz 140 dB
12kHz; 192kHz 138 dB
Total Harmonic Distortion + Noise BW = 20Hz to f
44.1kHz; 48kHz –140 dB
48kHz; 44.1kHz –140 dB
48kHz; 96kHz –140 dB
44.1kHz; 192kHz –137 dB
96kHz; 48kHz –140 dB
192kHz; 12kHz –140 dB
192kHz; 32kHz –141 dB
192kHz; 48kHz –141 dB
32kHz; 48kHz –140 dB
12kHz; 192kHz –137 dB
Interchannel Gain Mismatch 0dB
Interchannel Phase Deviation 0 Degrees
Digital Attenuation SRC4193 Only
Minimum 0dB
Maximum –127.5 dB
Step Size 0.5 dB
Mute Attenuation 24-Bit Word Length, A-weighted –144 dB
DIGITAL INTERPOLATION FILTER
CHARACTERISTICS
Passband 0.4535 x f
Passband Ripple ±0.007 dB
Transition Band 0.4535 x f
Stop Band 0.5465 x f
Stop Band Attenuation –144 dB
Normal Group Delay (LGRP = 0) Decimation Filter On (DFLT = 0) 102.53125/f
Normal Group Delay (LGRP = 0) Decimation Filter Off (DFLT = 1) 102/f
Low Group Delay (LGRP = 1) Decimation Filter On (DFLT = 0) 70.53125/f
Low Group Delay (LGRP = 1) Decimation Filter Off (DFLT = 1) 70/f
DIGITAL DECIMATION FILTER
CHARACTERISTICS
Passband 0.4535 x f
Passband Ripple ±0.008 dB
Transition Band 0.4535 x f
Stop Band 0.5465 x f
Stop Band Attenuation –143 dB
Group Delay
Decimation Filter DFLT = 0 for SRC4193 36.46875/f
Direct Down-Sampling SRC4193 Only, DFLT = 1 0 Seconds
DIGITAL I/O CHARACTERISTICS
High-Level Input Voltage V
Low Level Input Voltage V
High-Level Input Current I
Low-Level Input Current I
High-Level Output Voltage V
Low-Level Output Voltage V
Input Capacitance C
= +3.3V, and V
DD
SIN
SOUT
(add 3dB to spec for A-weighted result)
IH
IL
IH
IL
OH
OL
IN
= +3.3V, unless otherwise noted.
IO
/2, –60dBFS Input
SOUT
f
= 1kHz, Unweighted
IN
/2, 0dBFS Input
SOUT
f
= 1kHz, Unweighted
IN
IO = –4mA 0.8 x V
IO = +4mA 0 0.2 x V
SRC4192, SRC4193
4 212 kHz
4 212 kHz
SIN
SIN
SIN
0.5465 x f
0.5465 x f
V
IO
SIN
SOUT
SOUT
IO
SIN
SIN
SIN
SIN
SOUT
SOUT
SOUT
0.7 x V
IO
0 0.3 x V
0.5 10 µA
0.5 10 µA
IO
3pF
V
IO
IO
Hz
Hz
Hz
Seconds
Seconds
Seconds
Seconds
Hz
Hz
Hz
Seconds
V
V
V
V
4
www.ti.com
SRC4192, SRC4193
SBFS022B
ELECTRICAL CHARACTERISTICS (Cont.)
All parameters specified with TA = +25°C, V
PARAMETER CONDITION MIN TYP MAX UNITS
SWITCHING CHARACTERISTICS
Reference Clock Timing
RCKI Frequency
(2), (3)
RCKI Period t
RCKI Pulsewidth High t
RCKI Pulsewidth Low t
Reset Timing
Pulse Width Low t
RST
Delay Following
Rising Edge SRC4193 Only 500 µs
RST
Input Serial Port Timing
LRCKI to BCKI Setup Time t
BCKI Pulsewidth High t
BCKI Pulsewidth Low t
SDIN Data Setup Time t
SDIN Data Hold Time t
Output Serial Port Timing
SDOUT Data Delay Time t
SDOUT Data Hold Time t
BCKO Pulsewidth High t
BCKO Pulsewidth Low t
TDM Mode Timing
LRCKO Setup Time t
LRCKO Hold Time t
TDMI Data Setup Time t
TDMI Data Hold Time t
SPI Timing
CCLK Frequency 25 MHz
CDATA Setup Time t
CDATA Hold Time t
Falling to CCLK Rising t
CS
CCLK Falling to CS Rising t
POWER SUPPLIES
Operating Voltage
V
DD
V
IO
Supply Current V
I
, Power Down
DD
I
, Power Down (SRC4193 only)
DD
I
, Dynamic f
DD
I
, Power Down
IO
I
, Power Down (SRC4193 only)
IO
I
, Dynamic f
IO
Total Power Dissipation V
P
, Power Down
D
P
, Power Down (SRC4193)
D
P
, Dynamic f
D
NOTES: (1) Dynamic performance measured with an Audio Precision System Two Cascade or Cascade Plus.
(2) f
(3) f
SMIN
SMAX
= min (f
= max (f
SIN
SIN
, f
).
SOUT
, f
).
SOUT
= +3.3V, and V
DD
RCKIP
RCKIH
RCKIL
RSTL
LRIS
SIH
SIL
LDIS
LDIH
DOPD
DOH
SOH
SOL
LROS
LROH
TDMS
TDMH
CDS
CDH
CSCR
CFCS
= +3.3V, unless otherwise noted.
IO
SRC4192, SRC4193
128 x f
SMIN
20 1/(128 x f
0.4 x t
RCKIP
0.4 x t
RCKIP
50 MHz
)ns
SMIN
500 ns
10 ns
10 ns
10 ns
10 ns
10 ns
10 ns
2ns
10 ns
5ns
10 ns
10 ns
10 ns
10 ns
12 ns
8ns
15 ns
12 ns
3.0 +3.3 3.6 V
1.65 +3.3 3.6 V
= +3.3V, VIO = +3.3V
DD
= 0, No Clocks 100 µA
RST
Bit = 0, No Clocks 5 mA
PDN
= f
SIN
RST
PDN
SIN
DD
RST
PDN
SIN
= 192kHz 66 mA
sOUT
= 0, No Clocks 100 µA
Bit = 0, No Clocks 21 µA
= f
= 192kHz 2 mA
SOUT
= +3.3V, VIO = +3.3V
= 0, No Clocks 660 µW
Bit = 0, No Clocks 16.6 mW
= f
= 192kHz 225 mW
SOUT
ns
ns
SRC4192, SRC4193
SBFS022B
www.ti.com
5
TYPICAL CHARACTERISTICS
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 20k 40k 96k80k60k
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
(12kHz:192kHz)
Frequency (Hz)
(32kHz:48kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 20k 40k 96k80k60k
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 24k20k15k
(12kHz:192kHz)
Frequency (Hz)
(32kHz:48kHz)
Frequency (Hz)
6
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
(44.1kHz:48kHz)
Frequency (Hz)
www.ti.com
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 24k20k15k
(44.1kHz:48kHz)
Frequency (Hz)
SRC4192, SRC4193
SBFS022B
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 10k 20k 48k40k30k
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 20k 40k 96k80k60k
(44.1kHz:96kHz)
Frequency (Hz)
(44.1kHz:192kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 10k 20k 48k40k30k
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 20k 40k 96k80k60k
(44.1kHz:96kHz)
Frequency (Hz)
(44.1kHz:192kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 22k20k15k
SRC4192, SRC4193
SBFS022B
(48kHz:44.1kHz)
Frequency (Hz)
www.ti.com
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 22k20k15k
(48kHz:44.1kHz)
Frequency (Hz)
7
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 10k 20k 48k40k30k
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 20k 40k 96k80k60k
(48kHz:96kHz)
Frequency (Hz)
(48kHz:192kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 10k 20k 48k40k30k
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 20k 40k 96k80k60k
(48kHz:96kHz)
Frequency (Hz)
(48kHz:192kHz)
Frequency (Hz)
8
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 22k20k15k
(96kHz:44.1kHz)
Frequency (Hz)
www.ti.com
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 22k20k15k
(96kHz:44.1kHz)
Frequency (Hz)
SRC4192, SRC4193
SBFS022B
TYPICAL CHARACTERISTICS (Cont.)
–60
–70
–80
–90
–100
–110
–120
–130
–140
–150
–160
–170
–180
dBFS
FFT with 1kHz INPUT TONE at –60dBFS
(192kHz:12kHz)
01k2k3k4k 6k5k
Frequency (Hz)
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 20k 40k 96k80k60k
(96kHz:48kHz)
Frequency (Hz)
(96kHz:192kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 24k20k15k
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 20k 40k 96k80k60k
(96kHz:48kHz)
Frequency (Hz)
(96kHz:192kHz)
Frequency (Hz)
0
–20
–40
–60
–80
dBFS
–100
–120
SRC4192, SRC4193
SBFS022B
–140
–160
–180
01k2k3k4k 6k5k
FFT with 1kHz INPUT TONE at 0dBFS
(192kHz:12kHz)
Frequency (Hz)
www.ti.com
9
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 2.5 5k 7.5k 10k 16k15k12.5k
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 22k20k15k
(192kHz:32kHz)
Frequency (Hz)
(192kHz:44.1kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 2.5k 5k 7.5k 10k 16k15k12.5k
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 5k 10k 22k20k15k
(192kHz:32kHz)
Frequency (Hz)
(192kHz:44.1kHz)
Frequency (Hz)
10
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
(192kHz:48kHz)
Frequency (Hz)
www.ti.com
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 10k 20k 24k40k30k
(192kHz:48kHz)
Frequency (Hz)
SRC4192, SRC4193
SBFS022B
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VDD = +3.3V, and VIO = +3.3V, unless otherwise noted.
FFT with 1kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 10k 20k 48k40k30k
FFT with 20kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
(192kHz:96kHz)
Frequency (Hz)
(44.1kHz:48kHz)
Frequency (Hz)
FFT with 1kHz INPUT TONE at –60dBFS
–60
–70
–80
–90
–100
–110
–120
dBFS
–130
–140
–150
–160
–170
–180
0 10k 20k 48k40k30k
FFT with 20kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 22k20k15k
(192kHz:96kHz)
Frequency (Hz)
(48kHz:44.1kHz)
Frequency (Hz)
FFT with 20kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 5k 10k 24k20k15k
SRC4192, SRC4193
SBFS022B
(48kHz:48kHz)
Frequency (Hz)
www.ti.com
FFT with 20kHz INPUT TONE at 0dBFS
0
–20
–40
–60
–80
dBFS
–100
–120
–140
–160
–180
0 10k 20k 48k40k30k
(48kHz:96kHz)
Frequency (Hz)
11
Loading...